Used Engel Es 1800/350Hl for sale (10,155)

Condition: ready for operation (used), Year of construction: 2001, Engel ES 200/75 HL Closing 75 tons Gjdpfx Ajvzhmieb Tebr Year 2001 Scrow 35 mm

Condition: ready for operation (used), Year of construction: 1986, Engel ES 80/35 ST Closing 35 tons Year 1986 Godetwmv Sspfx Ab Tsbr Scrow 22mm EC 88

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 9,64,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Godpfezqbk Nex Ab Tobr

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 203836, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 90 g, total length: 3,800 mm, total width: 2,100 mm, total height: 3,100 mm, overall weight: 8,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, For sale is a vertical injection molding machine from the manufacturer ENGEL, model Insert 330V/80 Rotary (800 kN / 80t). Technical data: Machine type: Insert 330V/80 Rotary Year of manufacture: 2015 Machine number: 203836 Design/Construction: Vertical unit with rotary table Control system: ENGEL CC300 Drive technology: Ecodrive CLAMPING UNIT: Clamping force: kN 800 (80 t) Clamping unit design: Vertical / column-free or barrier-free Table design: 2-station rotary table INJECTION UNIT: Injection unit type: Type 330 Screw diameter: 30 mm Theoretical displacement volume: 99 cm³ Injection part weight: 90 g/shot Nozzle type: Needle-close nozzle Injection unit installation position: Vertical, from above HYDRAULICS, DRIVE, CONTROL CABINET & INTERFACES: Drive concept: ENGEL Ecodrive (energy-optimized) Automation interface: Euromap 67.1 Safety systems: Light curtain / protective enclosure for the work area MACHINE DIMENSIONS, TRANSPORT, AND WEIGHTS Installation dimensions (basic machine): 3,800 x 2,100 x 3,400 Transport dimensions: 3,800 x 2,100 x 3,100 mm Required hall height: 3,800 mm Total weight: 8,500 kg Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gbjdpeznl Ersfx Ab Tsr Gjbn N Ay Dowza Dxogoil Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, maximum load weight: 36,140 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS,

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Gbodpfx Aszncmasb Tjr Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Gjdjy Iwlaspfx Ab Tjbr Machine is immediately available!

Condition: excellent (used), Year of construction: 2001, Engel ES 500/110 HL Clamping force: 110 tonnes Year of manufacture: 2001 Screw diameter: 45 mm Injection volume: 318 cm³ Gbsdpjxu Rldofx Ab Tjr Enlarged clamping platen Platen dimensions: 730x600 mm

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Closing 60 TO Year 1999 Scrow 30 mm Enlarged clamping plate 660x560 Gsdpfjvlangsx Ab Tebr

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Gbsdpfx Abezqdage Tjr Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out system Conveyor belt, capacity: 1825 lt/h TPS robot, model: TRT-M4-72-E One of the following mold options can be selected: Option 1: MHT mold, 72-cavity, for 30.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5-liter bottles) Gbodezmxdlepfx Ab Ter Option 2: 72-cavity core sets for 27.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0-liter bottles) Note: In addition to the machine, only a dryer and a cooling system are required to start production.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Gbsdpfxjzrwgcs Ab Tsr Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Platen dimensions (table): 720 mm Mould height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Injection unit: Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Gsdpfxoxwviao Ab Tsbr Machine weight: 5,300 kg

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Gbodpfx Abjw U Sz Is Tor Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Gbjdszkatcepfx Ab Tjr Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system Gbjdpfxjyw Aa Uj Ab Ter - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Gbodpfxsywrtwj Ab Tor Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data • Manufacturer: ENGEL • Model: e-cap 3440/420 T • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm • Mounting plate dimensions: 1350 × 1350 mm • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Gbjdpfxszlgi Ho Ab Tsr Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose.

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Gsdpfey N R N Usx Ab Tebr Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Gsdpfx Aozrq U Hsb Tobr

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, loading space length: 7,700 mm, loading space width: 2,250 mm, loading space height: 2,480 mm, Equipment: ABS, tail-lift, Dinkel DTAKWLW 18000 Beverage Trailer with Swing Walls, SAF Axles, LBW For inquiries: 0726686 Gbjdpfxjzrirks Ab Tsr * Condition: Very good * First registration: 04/2019 * Permissible total weight: 18.00 t * ABS * Air suspension * Side swing walls * SAF axles Tail lift * Manufacturer: Bär * Load capacity: 2,000 kg Dimensions (loading area): Internal length: 7,700 mm Internal width: 2,250 mm Internal height: 2,480 mm Tires: 1st axle: 385 / 55 R 22.5, 25% air-sprung 2nd axle: 385 / 55 R 22.5, 25% air-sprung ----Price: 9,900 euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and Russian Typographical errors, errors and prior sale excepted.

Condition: good (used), Year of construction: 2011, 2011 Engel E-Motion 3440/420 T Injection Moulding Machine Gedpfx Aszt I Ndsb Tebr Working Hours As Of (17.02.26) 65,000. Clamping Unit e-cap 420. Clamp Force To/ kN 420/4200. Opening Force 420kN. Opening Stroke 700mm. Screw Ø80mm, L/D 25. Mold Height Max. 750mm. Mold Height Min. 350mm. Mould Fixing Platens H1,350 x W1,350mm. Tie Bar Distance H920 x W920mm. Ejector Stroke 220mm. Ejector Force Forward/Return 120kN. Mold Weight, Max On Moving Platen/Centre Of Gravity (Without Additional Guide Block) 6,200/315kg/mm. Dry Operation Time 2.1 at 600sec at imm. E-cap 420 Injection Unit: Weight 36 Ton. Drive Power 147.3kW. Injection Unit Heating Capacity (Max.Capacity/Max Zones). 44.7 kW/6n. Total Power Premium ( When Using Compensation Equipment For Correcting The Power Factor Of Machines, plants Or Plant Components, Reactive Current Compensation With Impedance Capacitors Is Necessary) 193 kW. Connected Current Premium 286A ( With Voltage 3 x 380V - 400V + N + PE, 50/60Hz). Cooling Water Consumption Premium 1,980l/h (With An Ambient Temperature Of Maximum 35°C. S/No. 178804 (2011) Weight 12,000kg. Seller Can Assist With Decommissioning If Required.

Condition: used, Year of construction: 2015, Operating hours: 39326 Clamping force: approx. 100 t Number of components: 1 Tie bar spacing: Tie-bar-less Horizontal screw diameter: approx. 40 mm Core pull: 0 Hot runner zones: 4 Clamping system: Toggle (KH) Max. stroke: approx. 175.0 mm Godpfszlffyex Ab Tjbr Screw speed: approx. 420 rpm Heating zones: 4 Heating power zone 1: approx. 4.23 kW Heating power zone 2: approx. 3.00 kW Heating power zone 3: approx. 3.00 kW Heating power zone 4: approx. 3.00 kW Injection servo: No Measuring system: Incremental encoder Pressure sensor type: Diaphragm Temperature control: J-type thermocouple

Condition: used, functionality: unexamined, Ferwood Code: RU0010431 - Manufacturer Code: GNM 5480-B4 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Gbedpfjv Iz Iasx Ab Tor

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Gbsdpey Au I Usfx Ab Tjr Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.