Used Ergus Inverters Plasma 404 Dp for sale (4,052)

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Gbsdszhnucjpfx Aatot

Condition: used, mileage: 34,260 km, power: 59 kW (80.22 HP), first registration: 07/1964, fuel type: gasoline, color: green, driver cabin: other, gearing type: mechanical, number of seats: 2, Year of construction: 1964, Equipment: all wheel drive, Vehicle location: Bovenden, Color: green Fabric: gray soft top: green Gbsdpfxjvhi Twj Aatot U82 (main series) Start and drive with a brand new engine that has now covered 350 km. The engine must therefore be run in further. The renewed parts include: New engine block, batteries, ignition coil, spark plugs, spark plug wires, distributor cap, hood, windshield wipers, headlight grille, fuses, horn, mirrors, seats, snorkel, engine washer, throttle cable, lights, switch plate, leather protection gearshift, 2x front tires, 5 inner tires, brake shoes front and rear, brake cylinders front and rear, complete exhaust, gearbox rubbers renewed, handbrake rubbers, fuel tank, blind spot blades, special stainless steel lock for battery box, oil, coolant, brake fluid, grease, oil filter, fuel filter and several new loose parts are still available as spare parts. Primed twice and painted twice. The front floor still needs to be painted, then it's just a matter of sticking with it. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Gbodpfx Aaertvi Uotst Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Gbedpfx Aszxqtveatet Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Gbjdszhby Sspfx Aatst

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 10 mm, table length: 3,000 mm, working width: 1,500 mm, Carbonini plasma cutting machine, model Entry, with a working area of 3000x1500 mm. Complete with two Thermal Dynamics current generators. Work performed: - Replacement of the work surface - Replacement of the sliding guides - Management software for handling sheet metal parts Gbedpszdrz Sofx Aatjt Thermal Dynamics CUTMASTER 151 plasma cutter, maximum cutting capacity of 100 Amps, 30 mm. Thermal Dynamics CUTMASTER 51 plasma cutter, maximum cutting capacity of 40 Amps, 12 mm.

Condition: like new (used), New industrial welding machine WELDKAR Multi-GMAW 400S DP Multi-GMAW 400S DP Features: TIG HF, LIFT TIG, MMA, MIG Double-pulse MIG Synergic operation Input voltage: 3-phase AC 400 V ± 10% Selectable water/air cooling IGBT module High duty cycle MCU control system Enhanced protection Tested at 550 V Generator-friendly Power supply: 3-phase Duty cycle: 60% at 400 A / 100% at 310 A Gjdexf Nvispfx Aatobt Enables activation of dedicated pulse curves for aluminium, mild steel, and CuSi3 Waveform control for additional arc stability, even at low currents Digital control of all welding parameters Generator-friendly design allows cooperation with diesel generators, preventing failures caused by voltage spikes Protections include phase loss, overheating, overvoltage, undervoltage, and overcurrent NET PRICE: 10,000 GROSS PRICE: 12,300

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Gjdoydqk Hopfx Aatebt Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Gbedpeznz Ezofx Aatst Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Godsyzhl Depfx Aatsbt

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: AB00019454, functionality: fully functional, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, For sale, a fully functional CNC drilling machine, model SCM Morbidelli CX210, with high axis travel speeds, a very large drilling head, and a drilling head for Blum fitting spacing, as well as a saw for creating grooves. Very fast drilling, without an electro-spindle. Specifications: Min./Max. element length mm 200/3,050 Min./Max. element width mm 50/1,300 Min./Max. element thickness mm 8/95 Max. element weight kg 70 Max. feed rate in X-Y-Z axes m/min 70-40-30 DRILLING HEAD F31LTC Vertical spindles pcs. 21 Horizontal spindles in X axis pcs. 6 Gsdpozz Syvsfx Aatebt Horizontal spindles in X axis pcs. 4 Spindle speed rpm 4,500 Fixed saw in X axis, diameter mm, rpm 125 5500 Max. saw thickness mm 6 Motor power kW 2.2 ADDITIONAL OPTIONS Inverter for the drilling head to adjust the drilling head speed in the range of 3000-8000 rpm Drilling head for fittings with 45/9.5 spacing "eye-M PRO" console integrated with PC Device allowing CNC operation via provided programs. Supplied with: - system for monitoring machine status via an LED light bar - industrial PC: Fanless design, IP 53 protection - Intel I7 processor – 2.80/3.80 GHz - 8 GB RAM – DDR4 - 256 GB SSD hard drive - Windows 10 IOT – 64 bit program - QWERTY keyboard, English version - 3-function wired mouse - Ethernet RJ45 port - USB port: 1 available - nominal operating temperature +5°C / +35°C - color LCD monitor, 21 inches, full HD, 16/9 format, LED backlight, multi-touch system, 10-point Remote control Additional USB hardware key for the Maestro CNC program.

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F Gsdpfeu R A Dlex Aatebt - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Godjrtvi Rjpfx Aatobt Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Gjdpfx Ajzzbafjatobt Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: used, functionality: unexamined, Ferwood Code: RU0002775 - Manufacturer Code: 4-008-39-1155 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a reconditioning service; please contact us. Gedpfx Aszmhu Teatobt

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Measurements height 2300 mm Measurements depth 4300 mm Gsdpfx Aex D It Rsatjbt Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Number of axis 3 Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, functionality: unexamined, Ferwood Code: RU0008188 - Manufacturer Code: MDX61B-0150-503-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service; please contact us. Gjdpfxjzmhwhe Aatobt

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Manufacturer: Yaskawa with 2 robots, WIG AC and DC welding systems from EWM, spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel, or aluminum Technical specifications: Robotic welding system – specification / equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - S7 control for the fixture Double welding cell with 2 maintenance doors and 2 loading stations - opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version - extended design 2 x bases 1 x control unit with DX operating panel - Master - Slave 1 x mobile base with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Centrally programmable in sync via 1 robot controller Media connections for compressed air and electrical signals in the positioner Design and construction of a base frame for part holding Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Item no.: 520000050019 For automated and robotic applications Inverter DC welding machine Standard interfaces for automation (start/stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire feed speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: remote control, optional interfaces for automation, documentation, and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Mains connection 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Item no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture 4-roll drive Gbsdpez Aac Ujfx Aatot Water cooling connection Control with digital incremental encoder Push Pull capable Separate button for wire retraction, gas test, and wire threading Setting and saving parameters centrally via the welding system control Wire feed speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Swivel neck technology Push Pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and construction of a part holder for an aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robots consisting of: - Medium-frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water cooler Design and engineering Documentation such as machine design and parts lists in a simple format in German CE declaration Welding fume extraction system with piping

Condition: used, functionality: unexamined, overall weight: 3 kg, total length: 360 mm, total width: 260 mm, total height: 210 mm, Ferwood Code: RU0012069 - Manufacturer Code: MC07B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 3KG - Dimensions: 36X26X21 - If interested, we offer a refurbishment service, please contact us. Gsdpjzd U U Isfx Aatobt

Condition: used, functionality: unexamined, overall weight: 3 kg, total length: 360 mm, total width: 260 mm, total height: 210 mm, Ferwood Code: RU0012069 - Manufacturer Code: MC07B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 3KG - Dimensions: 36X26X21 - If interested, we offer a refurbishment service, please contact us. Godpfxezfabpo Aatebt

Condition: used, functionality: unexamined, overall weight: 3 kg, total length: 360 mm, total width: 260 mm, total height: 210 mm, Ferwood Code: RU0012069 - Manufacturer Code: MC07B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 3KG - Dimensions: 36X26X21 - If interested, we offer a refurbishment service, please contact us. Gjdpfx Ajzd U Uboatobt

Condition: used, functionality: unexamined, overall weight: 3 kg, total length: 360 mm, total width: 260 mm, total height: 210 mm, Ferwood Code: RU0012069 - Manufacturer Code: MC07B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 3KG - Dimensions: 36X26X21 - If interested, we offer a refurbishment service, please contact us. Gbodpfszd U U Ujx Aatet

Condition: used, Several control cabinets with frequency inverters ranging from 37 kW to 45 kW are for sale, in various designs and from different manufacturers. Details: Item No. Sch 6 Control cabinet with 37 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 15 Control cabinet with 37 kW Siemens S5 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S5 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 45 Control cabinet with 45 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 45 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No.: Sch 47 Siemens S5 control cabinet, Siemens Operator Panel OP393-III ✔️ Ideal as a distribution cabinet or for individual configuration Gsdpsztl N Iefx Aatebt ✔️ With control elements (buttons, emergency stop, display) ✔️ Robust industrial design ✔️ Perfect for modification, expansion, or replacement With Siemens S5 controllers With star-delta circuit for 45 kW With Siemens Operator Panel OP393-III Stock: 1 Available: immediately Condition: Used, good condition (see pictures). Electrical function not tested (or to be adapted). Scope of delivery: Control cabinet as shown Control elements / installed components

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm C.N. E.C.S. series 900 Gbjdjxc Ibrjpfx Aatet GENERATOR: CEBORA PLASMA PROF166

Condition: used, functionality: unexamined, Ferwood Code: RU0012065 - Manufacturer Code: MDX61B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible machine: - Weight: 3.5 kg - Dimensions: 46x39x27 - If interested, we offer a refurbishment service; please contact us. Godpfxsyz Uico Aatsbt