Used Ewe Drill Chuck Sk40 for sale (9,783)

Condition: excellent (used), Tapping attachment Type Efem MK 3 (28520) Godet R S Avepfx Ap Dokc Shank diameter on tap 21 mm Automatic right - left run Total length 285 mm Diameter 109 mm Weight 7.5 kg

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine Gjdpfx Ajupxcyep Dskc - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg Gkjdpfx Asupxdqep Djc dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad Gjdpfx Aoupxkwop Djkc connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: excellent (used), Four-jaw chuck Arowa No.8 (28592) Diameter 250 mm Gkodpfxjvx Acye Ap Doc Through hole 68 mm Weight 20 kg

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. Gedpfx Ajvdld Rop Dokc - deep stop - tool set - documentation

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm Godpsu Nm Nijfx Ap Dokc drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm Gedeu Rv Ukjpfx Ap Dekc No of Bottom Units: 3

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 7160 € 138.19 € 30 mm MK 3 250 mm 245 - 4000 U/min M25 400 mm 655 mm 1185 mm 280 kg 120 mm 100 mm 85 - 635 mm Gedpfx Aowiq N Usp Dskc 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB)

Condition: new, neu ca. 6-8 Wochen ab Auftrag Spanien 8970 € Gkjdpfx Aewva Hpep Doc 173.12 € 30 mm MK 3 250 mm 65 - 3.060 (8) U/min 380 mm 600 mm 2060 mm 260 kg 100 mm 170 - 660 mm 1.216 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS

Condition: excellent (used), Lathe Chuck Three-Jaw Chuck Röhm 350 mm Diameter (28633) Bore Diameter 115 mm Gkodpfx Aowmk Huop Djc Centering Diameter 290 mm Height 100 mm 2 Sets of Jaws Weight 53 kg

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 40 mm throat 230 mm bore stroke 130 mm taper MK 4 MK table-size 400 x 315 mm Gsdexz Hg Rjpfx Ap Dekc turning speeds 105 - 1257 U/min total power requirement 2,55 KW weight of the machine ca. 0,35 t dimensions 0,8 x 0,6 x 1,95 m

Condition: used, overall weight: 260 kg, Material: steel Gsdpfoyxgf Rex Ap Dskc Diameter: 710 mm Spindle bore: 150 mm Spindle speed: 400 RPM Weight: 260 kg

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Manufacturer: Perske, multi-spindle drill head with drive Gkodpfevmw H Ajx Ap Djc -Drill head: 18 spindles -Drill bit spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Quantity: 2 pieces available Price: per piece -Overall dimensions: 800/200/H575 mm -Weight: 67 kg/unit

Condition: used, Colour: Green Empty weight: 6.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 Gjdpfewfpbbsx Ap Dokc - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 5 Gkjdoy Nkyajpfx Ap Djc No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 4 MK table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light Gjdpfx Asy N D Ikop Dekc

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap Gkjdpfx Apeyrhppj Doc • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: good (used), bore capacity in steel (diameter) 28 mm Gjdpfszfqmcsx Ap Dskc arm length 700 mm workpiece height max. 1300 mm tool taper MK3 feeds 0,1-0,3 mm/U spindle turning speed range 100-1.220 U/min total power requirement 1,4 kW weight of the machine ca. 1,3 t dimensions of the machine ca. LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping

Condition: used, Year of construction: 1987, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Colour: Green Empty weight: 700 kg - Year: 1987 - Documentation available: No - CE certificate present: No Gkodpfozkq Aujx Ap Doc - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 2.2 - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Display Model What's Included: - Carrying case - Unit - User manual Godpfxezk Ntrj Ap Dekc - Bit This item is an unused display model Availability: Available shortly Location: Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: workshop-inspected Fittings drilling head Drilling unit: 3/4 spindles Clamping cylinders: 2 Motor power: 0.8 kW Connection: 400/50 volts / Hz Machine dimensions Length 950 mm Gedpfx Apozk Nu Ae Dekc Width 650 mm Height 700 mm Weight: 80 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Godpfx Aozr D Dnsp Dokc

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA Gedpjzr I H Tjfx Ap Dekc - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, height adjustment type: electric, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 700 rpm, total width: 1,480 mm, total length: 4,440 mm, total height: 2,700 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, Vertical glass drilling machine with two opposing spindles – the hole is drilled from both sides at once, with no blow-out on the exit side and no need to turn the sheet. Brand new, made in Poland, CE. Batch drilling up to 20 holes – the cycle is programmed once, then the machine runs it on its own Automatic glass thickness measurement (±0.4 mm) – the PLC calculates spindle depth by itself Bar positioning accuracy ±0.7 mm – minimises cracking and chipping Hole chamfering – electronically controlled 7" HMI panel – operator training approx. 3 hours Modular design – servicing without dismantling the machine 10 years of remote online support from purchase, 12-month warranty Specifications: Dimensions 4,440 × 1,487 × 2,793 mm · weight 1,900 kg · spindle speed 700–2,800 rpm · max. drilling height 1,050 mm · max. sheet weight 200 kg · pneumatic clamping Gjdpfx Apjzyb Srj Dekc · drill cabinet for 70 bits · thin-wall bits 1/2", L=75 mm · float glass EXPOGLASS® – Polish manufacturer of glass processing machinery, 12+ years on the market.