Used Feed Units for sale (38,941)

Condition: used, mileage: 44,637 km, power: 375 kW (509.86 HP), first registration: 02/2025, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 AERO Turbo-Compound 4X2 Low-Liner Tractor Unit First Registration: 02/2025 Mileage: 44,637 km Condition: Like new Globetrotter XL Safety Cab, cab air suspension, Comfort Package, Electrical Package, Extended Living Package, 2 bunks, I-Park Cool stationary air conditioning, comfort driver and passenger seats, heated, camera-monitor system with close-range camera, 220-volt socket, stainless steel microwave Diesel engine 12.8 L displacement, turbo compound charger, 510 HP / 375 kW, 2,856 Nm torque Reinforced engine brake Volvo Engine Brake+ I-Shift 12-speed gearbox, I-See with map-based topography and traffic information Tyres: Front axle 355/50 R 22.5 Rear axle 295/55 R 22.5 Height-adjustable fifth wheel for coupling heights of 980 and 1,150 mm Black gloss steel rims Three ride heights for air suspension Dual battery system Fuel saving package 475 L and 505 L fuel tanks, AdBlue tank 99 L Extended Safety Package with active lane guidance, Volvo Dynamic Steering, and all available safety systems, complete LED lighting, 5x LED work lights Full aerodynamic kit including side skirts between the axles NATO socket RENTING is the new BUYING – available from us with full-service and rental-purchase options. Fgjdpfsy D E E Hex Ag Asc

Condition: used, mileage: 21,565 km, power: 353 kW (479.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 22.480 BL SA 4X4 Full All-Wheel Drive Also available with LoF tractor approval for 60 km/h First registration: 03/2025 Mileage: only 21,565 km TM cab with high roof, driver comfort package, construction site package, comfort cab suspension, 1 bed, multifunction leather steering wheel, comfort driver's seat with seat ventilation, water auxiliary heater, automatic climate control, MAN sound system with subwoofer, truck navigation system with large colour display, STABO CB radio, electric glass sunroof, LED daytime running lights, LightFix roof bar with 2 spotlights, 2 x rotating beacons on the cab Automated MAN TipMatic 12 28 OD transmission with off-road software, EfficientRoll, Idle Speed Driving, and rocking mode High-performance engine brake MAN EVBec, multi-stage Front axle with parabolic suspension Rear axle with AIR SUSPENSION and raise/lower function 2-circuit tipping hydraulics, switchable between high-pressure/low-pressure system, aluminium oil tank 195 L Wheelbase: 3,600 mm Differential locks on front axle, rear axle and centre differential Diesel tank aluminium 390 L Tyres: Front axle: 385/65 R 22.5 Rear axle: 315/80 R 22.5 Fedpfxoy Nvr Us Ag Asgc Fifth wheel height approx. 1,320 mm If required, available with low-pressure/agricultural tyres: Front axle: 445/65 R 22.5 Rear axle: single tyres 600/50 R 22.5 Maximum speed 60 km/h Safety package with ABS off-road logic, ESP, ASR, ESS emergency braking signal, Emergency Brake Assist, lane departure warning LDW, attention assistant MAN AttentionGuard RENTING is the new BUYING – Full-service rental available from us immediately.

Condition: used, mileage: 17,427 km, power: 412 kW (560.16 HP), first registration: 10/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: grey, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.560 4X2 LL SA Low-Liner with the new D30 "Super" engine from SCANIA First registration 10/2025 Mileage: 17,427 km Fgjdpsy Nvrujfx Ag Ajc Long-distance GX driver’s cab, 2 bunks (comfort version with slatted frame), air suspension cab, Light & Sight Plus safety package, Advance safety package, Driver Comfort Plus package, electric glass sunroof, premium heated driver’s seat with seat ventilation, multifunction leather steering wheel, light sensor with automatic high beam, rain sensor, interior lighting package, LED headlights, LED daytime running lights, LED fog lights, LED rear lights, LED side marker lights, rotating beacon on cab, Professional 12.3-inch instrument cluster, MAN truck navigation with online traffic, MAN sound system with subwoofer, EasyControl panel in driver’s door, Climatronic automatic air conditioning, 4 kW water heater, additional thermal and acoustic cab insulation, STAND AIR CONDITIONING, STABO CB radio, side window wind deflectors, rubber floor mats, LED beacons Front and rear axle air suspension with raise and lower function Tyres: Front axle: 355/50 R 22.5 Rear axle: 315/60 R 22.5 Fifth-wheel height approx. 950 mm Wheelbase 3,600 mm Aluminum diesel tanks left 530 L + right 330 L Enlarged AdBlue tank 135 L High-performance engine brake CRB + RETARDER MAN TipMatic 14.33, Idle Speed Driving transmission function, EfficientRoll Full safety package including DRIVER AIRBAG and belt tensioner, ESP, ASR, ABS, EBS, intelligent cruise control MAN EfficientCruise with PredictiveDrive, emergency brake assist, MAN SafeStop Assist, MAN ComfortSteering, lane change collision avoidance assist and turn assist RENTING is the new BUYING, available from us immediately as full service or lease purchase

Condition: new, Manual hand unit , J/N Automatic for single pieces Ja J/N Automatic for frames Ja J/N Fgodpfx Agsytx T Uo Aec

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Fedpfjzcqxuox Ag Ajgc Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 2011, condition: used, 1 unit of ROBINAR AC690PRO air conditioning service unit Serial number: P11196010 Fodpfszcmgzex Ag Ajgc Color: as shown in the images, matching the images and inspection Year of manufacture: 2011 Condition: used Location of the goods: Hall 1 Payment method: prepayment by bank transfer Shipping: self-collection only from the Hofgeismar location.

Condition: used, mileage: 2,01,218 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 33.510 BL SA 6x4 tractor unit with EPSILON S260Z96 timber crane First registration: 08/2023 Mileage: 201,218 km Crane operating hours: 830 h Permissible total weight: 33,000 kg Unladen weight: 14,390 kg Wheelbase: 3,900 mm Engine: D2676 LFAF with 12.4-liter displacement, 375 kW and 510 hp Transmission: TipMatic 12 26 DD Profi Performance with ZF retarder Transmission software: "Rocking" and "EfficientRoll" Front axle: reinforced parabolic suspension, 9.5 tons Rear axles: air suspension, 2x 13 tons ECAS air suspension STEERING BRAKE: The steering brake significantly reduces the turning radius, or greatly improves maneuverability. When activated by the driver, the rear wheels on the inside of the curve are braked (speed up to a maximum of 30 km/h). Aluminum fuel tank: 390 liters Extensive safety package with: Digital axle load display, driver airbag with seatbelt pretensioner, MAN ComfortSteering, MAN BrakeMatic, full brake assist, EBA2 Emergency Brake Assist2, ABS, ASR traction control, ESP electronic stability program, MAN AttentionGuard, LRA lane keeping assist, lane change assist LCS, and turning assist. Safety package Light & Visibility Plus GM cab, air-suspended cab, tinted windows, heated and air-conditioned driver's comfort seat, multifunction leather steering wheel, additional cab insulation, cool box under the bed that can be fully retracted, maneuvering lights at the entrance, work lights on the rear of the cab, MAN sound system, truck navigation, large 12.3-inch color display, 2x air horns on the cab, Bluetooth hands-free system for 2 phones, smoker's package, LED headlights, LED daytime running lights, LED fog lights, high beam assist, auxiliary water heater. Tires Front axle: 385/65 R 22.5, tread depth 100%, NEW Rear axle: 315/80 R 22.5, tread depth 90% Timber crane EPSILON S260Z96 Hydraulic reach: 9,600 mm (double extension), support width: 4.70 m, slewing range: 385°, endless rotator 10 tons G121A reinforced version, timber grapple EPSILON type YFG57X, with large log comb, cross-lever control 2+2, crane seat with seat heating and weather protection roof, 4x LED work lights, biodegradable oil Plantosyn 3268Eco, enlarged aluminum tank with 200 liters, ASA aluminum oil cooler 0177, complete control system for DOLL-LOGO21 including NATO socket and hydraulic trailer coupling, Additional light and air connections for "standard" semi-trailers. Fodpozb Aqgofx Ag Ajgc RENTING is the new BUYING; with us, it is also available as full-service rental or lease-purchase.

Condition: used, mileage: 57,343 km, power: 412 kW (560.16 HP), first registration: 06/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, brakes: retarder, color: grey, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.560 4X2 LL SA with the new D30 "Super" engine from MAN/SCANIA, KIPPHYDRAULIC First registration 06/2025 Mileage 57,343 km Long-haul driver's cab GX, 2 bunks (comfort version with slatted base), cab air suspension, safety package Light & Visibility Plus, safety package Advance, driver comfort package Plus, electric glass sunroof, premium driver's seat with heating and seat climate control, multi-function leather steering wheel, light sensor with automatic high beam, rain sensor, interior lighting package, front headlights LED, daytime running lights LED, fog lights LED, rear lights LED, side marker lights LED, rotating beacon on the cab, instrument cluster Professional 12.3 inches, MAN Truck Navigation with Online Traffic, MAN sound system with subwoofer, EasyControl control panel in the driver's door, Climatronic air conditioning, water heater 4 kW, additional cab insulation, thermal and acoustic, STAND-ALONE AIR CONDITIONING, CB radio STABO, side window wind deflectors, rubber floor mats, LED rotating lights Front and rear axle air suspension with lifting and lowering function Tires: Front axle 385/55 R 22.5 Rear axle 315/70 R 22.5 Fifth wheel height approx. 1,150 mm Wheelbase 3,600 mm Aluminum diesel tank on the left 680 L Fgjdpfxozb Aqas Ag Ajc Enlarged AdBlue tank 165 L High-performance engine brake CRB + RETARDER MAN TipMatic 14.33, gear function Idle Speed Driving, EfficientRoll 2-line tipping hydraulic system, switchable high-pressure/low-pressure system, large aluminum hydraulic oil tank approx. 190 L. Full safety package with DRIVER AIRBAG and seat belt pretensioner, ESP, ASR, ABS, EBS, intelligent cruise control function MAN EfficientCruise with PredictiveDrive, full braking assistant, MAN SafeStop Assist, MAN ComfortSteering, lane change collision avoidance assistant and turning assistant, RENTING is the new BUYING, with us also available immediately in full-service or LEASE-TO-OWN-----

Condition: used, Year of construction: 2017, 2017 | MAN TGS 33.500 (NEW ENGINE) | Used Tractor Unit | 459568 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Fjdjyb Ukfspfx Ag Aegc 👷‍♂️ Inspected by an independent expert 36 inspection points 29 approved ✅ 1 imperfect ℹ️ 6 issues ⚠️ 📌 Inspector's Comment: Nice truck with good performance. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39689 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 140 bar -Flow rate: 30 l/min -Motor: Lammers 1400 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 910/520/H970 mm Fgodpfxezcuw Io Ag Ajc -Weight: 225 kg

Condition: excellent (used), functionality: fully functional, overall weight: 75 kg, total length: 900 mm, total width: 700 mm, total height: 880 mm, year of last overhaul: 2026, Caustic immersion unit Riehle LTG 780, Immersion Tank Free-standing unit made of stainless steel Fgjdpfxjy Ac Tfs Ag Aoc includes a transport table with a storage area caustic drain valve at the bottom used unit, cleaned with warranty

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. Fgjdpfxexxalns Ag Aoc The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: new, Manufacturer: Blum Condition: New, packaging was only opened for the purpose of taking photos Type: Pneumatic unit Model: PNE-054 Assembly: Filter-valve block Medium: Compressed air Design: Maintenance and supply unit for pneumatic systems Components: Filter unit, valve unit, pneumatic block Application area: Industrial automation and pneumatic applications Fgodpfx Aszcw Enjg Asc Mounting type: Control cabinet and machine mounting Quantity available: 2 pieces

Condition: new, Manufacturer: Balluff Condition: New, packaging only opened for the purpose of taking photos Fsdpfszcw Ebjx Ag Aegc Type: PROFIBUS I/O module Model: BNIPBS-302-000-Z001 Order number: BNI000A Communication interface: PROFIBUS DP Digital inputs: 16 Digital outputs: 16 Sensor/actuator connection: M12 Protection rating: IP67 Design: Fieldbus module for decentralized installation Application area: Industrial automation technology Mounting type: Machine and system mounting Quantity available: 6 units

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: Fjdpfjq N Ud Iox Ag Aegc - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: used, Article: Chip processing system Manufacturer: Lanner Type: Vetamat DS32 Yob: 2010, in 2025 completely refurbished The patented Vetamat system reliably separates metal chips from coolant. The systems achieve a throughput of up to 2,000 kg/h. The complete systems include a centrifuge, a chip conveyor with tank, a sump, and a control system. Depending on the type of material, you can choose between a parabolic centrifuge or a scraper-bottom centrifuge. Thanks to the modular system, the Vetamat system can be optionally expanded with a chip crusher, a large-part sluice, or a lifting & tipping device, as well as coolant treatment. - Very short commissioning time - Turnkey design - Minimal space requirements Fodpfxozcyfwj Ag Asgc - Excellent accessibility - Modular system - Mounted on a WHG-compliant oil-tight sump - High operational reliability - Proven Lanner technology - Fully automatic operation with standby function - Expandable for long chips and coolant cleaning - Chip container under the centrifuge can be loaded from three sides Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, For sale: Fedszcuv Dopfx Ag Asgc 2 industrial fans on a pallet. Dimensions: height 60 cm, diameter 80 cm, with a flange of 90 cm. Net price: 460 Euros for both.

Condition: good (used), functionality: fully functional, Internal article number: 26007 Universal milling machine Deckel FP1 Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Connection power: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Fgjdpfxozb Ni Ae Ag Aoc Tool holder: SK40 Feed rate: Continuously variable, 5-500 mm/min Rapid traverse function: Not operational! The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our more than 500 m² heated storage area.

Condition: used, mileage: 12,09,163 km, power: 340 kW (462.27 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 8,552 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/55 R22,5, rear tire size: 315/70 R 22,5, number of seats: 2, maximum speed: 90 km/h, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, | DAF XF 460 FT, EURO 6 | Automatic transmission, electric windows | Refrigerator, air conditioning | Multifunction steering wheel, cruise control, adaptive cruise control | Auxiliary heater, radio/CD player | Differential lock | Auxiliary air conditioning, alloy wheels | Errors, typos and prior sale are subject to change. Fgodpfx Agoza Etuj Asc

Condition: used, Used machine Equipment and technical data: operational Engine 1.8 kW Dust extraction port 160 mm Availability: short notice Fedpozbv Hujfx Ag Aogc Storage location: 63934 Röllbach

Condition: new, Year of construction: 2021, weight / kg Fedpszcq N Tefx Ag Aegc

Condition: used, mileage: 2,57,884 km, power: 368 kW (500.34 HP), first registration: 04/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FORD F-MAX 500 with full equipment First registration 4/2023, from first owner Mileage 257,884 km Mega-Cab ComfortPlus (CPP), Luxury Pack LUX, cab air suspension, 2 beds, comfort driver's seat, comfort co-driver's seat, storage compartments on the rear wall above the second bed, automatic climate control with stationary air conditioning, multifunction leather steering wheel, LED low beam headlights, winter package with electrically heated windshield, light and rain sensor, TRUCK navigation, STABO CB radio, storage table on the dashboard, deep sun visor with 2x LED spotlights, 2x LED rotating beacons, illuminated roof lamp box ZF automated manual transmission TRAXON 12-speed RETARDER 2-circuit tipping hydraulics, switchable high-pressure/low-pressure system, large aluminum hydraulic oil tank 200 L, Aluminum diesel tank 600 liters Fgodpfx Aszbwypeg Aoc Tires: Front axle 385/55 R 22.5, tread depth 10 mm Rear axle 315/70 R 22.5, tread depth NEW, 100% Fifth wheel height approx. 1,150 mm Full safety package with ABS, SEP, ASR, lane keeping assist, emergency braking assist, adaptive cruise control ACC, tire temperature monitoring, tire pressure monitoring RENTING is the new BUYING, also available with us in a full-service rental agreement immediately.

Condition: used, mileage: 1,95,781 km, power: 368 kW (500.34 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FORD F-MAX 500 with complete, top-of-the-line equipment First registration 06/2023, from first owner Mileage 195,781 km Mega-Cab ComfortPlus (CPP), Luxury Pack LUX, air suspension for cab, 2 bunks, comfort driver's seat, comfort co-driver's seat, storage compartments on the rear wall above the second bunk, automatic climate control, stand-alone air conditioning system, multi-function leather steering wheel, LED low beam headlights, winter package with electrically heated windshield, light and rain sensor, truck navigation system, STABO CB radio, storage table on dashboard, deep sun visor with 2x LED spotlights, 2x LED rotating beacons, illuminated roof lamp box ZF automated manual transmission TRAXON 12-speed RETARDER 2-circuit tipping hydraulics, switchable high-pressure/low-pressure system, large aluminum hydraulic oil tank 200 L, Aluminum diesel tank 600 liters Tires: Front axle 385/55 R 22.5, tread depth 11 mm Rear axle 315/70 R 22.5, tread depth 15 mm Saddle height approx. 1,150 mm Fodpoylr T Sjfx Ag Ajgc Full safety package with ABS, SEP, ASR, lane keeping assist, emergency braking assist, adaptive cruise control ACC, tire temperature monitoring, tire pressure monitoring RENTING is the new BUYING; with us, it is also immediately available with full-service leasing.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1 kg, total length: 123 mm, total width: 102 mm, total height: 25 mm, input voltage: 5 V, type of input current: DC, warranty duration: 24 months, Nalbantov N-Drive Industrial is a USB floppy disk drive emulator designed as a replacement for legacy 3.5" floppy drives used in CNC machines, industrial controllers, textile machines and other professional equipment. The unit replaces the original floppy drive and allows the machine to read virtual floppy disks from a standard USB flash drive. It is supplied configured according to the target machine/interface. Application: Replacement for legacy floppy disk drives in CNC machines, industrial controllers, embroidery machines, textile machines, laboratory equipment and other professional systems. Additional information: The listed price is for 1 pc, excluding shipping, import duties, taxes and customs fees. We ship worldwide by DHL. Standard shipping for 1 pc is usually EUR 32. For multiple units, combined shipping discounts may apply. This is a new retrofit USB floppy drive emulator for CNC and industrial machines. Please send us the machine brand/model and, if possible, a photo of the original floppy drive or control panel so we can confirm compatibility. Main Features Configurable hardware interface for many legacy floppy drive systems Plug-and-play installation No additional drivers required Same size and connector layout as a standard floppy drive Supports standard USB flash drives Up to 100 virtual floppy disks on one USB flash drive No moving parts for improved reliability Stainless steel front panel Laser-etched front panel markings LED display for virtual disk selection Supplied with USB flash drive, software, manual and technical support Panel Controls Selection Buttons Used to select the virtual floppy disk number. The selected virtual disk will be loaded from the USB flash drive. LED Display Shows the currently selected virtual floppy disk number. Green Status LED Indicates drive activity. The LED flashes or remains lit while the connected machine is reading or loading a virtual floppy disk. USB Port Used for inserting a compatible USB flash drive. Supported Interface File System: FAT12 / MS-DOS Optional: custom file systems depending on the machine Disk Size: 1.44 MB / 720 KB Optional: 160 KB, 180 KB, 320 KB, 360 KB, 640 KB, 1.2 MB Floppy Drive Type: 3.5" Optional: 5.25", slim floppy drive format Rotation Speed: 300 rpm Optional: 360 rpm Drive Select / Signals: DS0, DS1, MO, DC signal Optional: Ready signal Floppy Interface Connector: 34-pin Optional: 26-pin, 24-pin Fgodpsza U Uzefx Ag Aec Important Compatibility Note: Configuration may vary depending on the specific machine, controller, floppy interface and disk format. The N-Drive Industrial is configured according to the target equipment before shipment. Software Compatibility The included software is supported by: Windows XP Windows Vista Windows 7 Windows 8 Windows 10 Windows 11 Windows Server 2008 Optional support: Windows 98 Windows Me Windows 2000 Mac OS Dimensions: Length: 12.3 cm / 4.8 in Width: 10.2 cm / 4.1 in Height: 2.5 cm / 1 in Package Includes Nalbantov N-Drive Industrial USB floppy disk drive emulator Prepared USB flash drive Software for transferring data from old floppy disks to USB flash drive User manual Mounting instructions Technical support 2-year warranty

Condition: used, Year of construction: 2006, machine/vehicle number: HB45, functionality: fully functional, Year of manufacture 2006 / revision 2009 Connected load 40 KW Machine weight 9650 kg Processing units 12 horizontal 12 vertical 6 Total units 18 Circular indexing 0.7 seconds Number of collets 12 Type B45 Maximum clamping 45.00D diameter Fsdpfx Ajvt Ummog Aogc Length of workpieces max 170 mm Hydraulic unit 10L/Sp-30ccm/4Kw/NG 150 Control cabinet / gallows + pendant control OP 10C Loading magazine 4.20 M Platform Coolant system Exhaust nozzle Stairs