Used Four Press Fully Automatic Pallet Changer for sale (47,147)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 74800 € 1413.72 € 100 to 500 mm 1000x800 mm 600 mm 26 mm/s 5 mm/s 4 kW 1260 mm 1060 mm 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter Itsdpfxjynm H So Acrsh • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Iedpfowrkctox Acreth Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, ECOSPIR EV These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with their sophisticated and well-engineered technology. Easy operation via touchscreen display. Minimal installation effort – Plug and Play. Technical Data: Operation via TOUCH SCREEN Storage of up to 8 wrapping programs Film tension control with mechanical brake Turntable diameter: 1500 mm Itodemt Du Nepfx Acroh Continuous turntable load capacity: 2000 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1 kW Machine with CE marking Warranty: 24 months Options: upon request Ramp 1650 mm Ramp for electric pallet truck (length 3000 mm) Tower extension for pallet heights up to max. 2700 mm POWER PRE-Stretch 200% POWER PRE-Stretch 250% POWER PRE-Stretch 0–400% (with frequency inverter) Black-light photocell

Year of construction: 2026, condition: new, ECOSPIR TS These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1500 mm • Turntable permanent load 1200 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1.5 KW • Speed of the film carriage Itedjhfdf Ejpfx Acrjh • Adjustment of foot and head wraps • Cross windings / spiral one-way winding • Height detection by photocell • can wrap black products or stretch film (optional) • CE marked machine Warranty: 24 months (single-shift operation),

Year of construction: 2026, condition: new, functionality: fully functional, ECOSPIR EV These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with their sophisticated and well-engineered technology. Easy operation via touchscreen display. Minimal installation effort – Plug and Play. Technical Data: Operation via TOUCH SCREEN Storage of up to 8 wrapping programs Film tension control with mechanical brake Turntable diameter: 1500 mm Continuous turntable load capacity: 2000 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1 kW Machine with CE marking Warranty: 24 months Options: upon request Ramp 1500 mm Ramp for electric pallet truck (length 3000 mm) Tower extension for pallet heights up to max. 2700 mm POWER PRE-Stretch 200% Itsdpfehfdc Rjx Acreh POWER PRE-Stretch 250% POWER PRE-Stretch 0–400% (with frequency inverter) Black-light photocell – €490.00

Condition: used, Year of construction: 2021, functionality: fully functional, Fully automatic sealing packaging line PRATIKA 80-T MPS for sale! The basket sealing packaging line consists of equipment from various manufacturers, integrated into a single technological line that complies with CE safety directives and has been certified accordingly. The basket sealing packaging line consists of: · PRATIKA 80-T MPS, year of manufacture 2021 · 2 pcs. x 1.80 m conveyors with positioning system · 1 pcs. x 2,70 m conveyor Itodpfx Ajyxd Nmocroh · 2 pcs. x 3 m conveyors · 1 pcs. x 3,30 m conveyor (at the control panel) · 1 pcs. x 1,10 m conveyor · 2 pcs. push cylinders · Control Panel with Siemens controller · Electrical cabinet · Security fences Packaging line requires approx. 4 × 11 m of floor space. Layout on request. PRODUCTS SIZES. This line was used to package products with the following dimensions: Kompelement mesh basket size 500x350x160 mm. Productivity in hour 1470 pcs. Kompelement mesh basket size 500x580x160 mm. Productivity in hour 1260 pcs. Kompelement mesh basket size 750x350x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 750x580x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 1000x350x160 mm. Productivity in hour 840 pcs. Kompelement mesh basket size 1000x580x160 mm. Productivity in hour 744 pcs. Jonaxel mesh basket size 459x501x137 mm. Productivity in hour 1260 pcs. TECHNICAL CHARACTERISTICS PLC Programmable Logic Controller Siemens Input/output monitor HMI Siemens Conveyor system speed up to 20 m/min Packing system capacity up to 25 bags per minute with every second bag inserted Maximum packaging film thickness 50 microns Maximum packaging film roll diameter 350 mm Note: Labeling, printer, filter and lasers shown in the photos are not for sale.

Condition: ready for operation (used), Year of construction: 2001, Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible. Itjdpfxsy Dgq Ds Acroh

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Itjdeyrf Aaepfx Acroh Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories shown in the pictures. Viewing is possible at any time by prior appointment, even at short notice. Iedsw S T Htopfx Acrsth VAT can be stated separately!

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 Itodpfx Acegd D U Esrsh - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Itsdpfx Acodzqmroreh Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Itodedzqmfspfx Acrsh Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open Iedsdzqltjpfx Acreth - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: new, Year of construction: 2026, functionality: fully functional, LTS - Semi or fully automatic pallet changer system. A quick and simple way to switch from wooden to plastic pallets, or vice versa. Itodpjxd Erqsfx Acrsh

Condition: new, Year of construction: 2026, NEW MACHINES The Mini Logy pallet exchanger system is well suited to most products, and where pallets need to be change from wooden pallets to plastic pallets automatically, or vice versa. The system can be assembled according to your needs and capacity. Isdpfx Acshx D Alsrsth Our systems can be customized and work with AGV solutions (Automated Guided Vehicles).

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. Itedpfx Aohmfctecreh We deliver and install throughout the EU.

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Itedpfx Acsxz Ugxereh Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Itodowzzzfjpfx Acrsh Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: new, Year of construction: 2026, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Isdpsfww Sqefx Acrjth Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 132500 € 2504.25 € 200 to 500 mm 1250x1000 mm 600 mm 25 mm/s 3,5 mm/s 7.5 kW 1550 mm 1300 mm 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Isdpfxjwiq Abo Acrsth Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 172500 € 3260.25 € 300 to 500 mm 1250x1000 mm 600 mm 22 mm/s 2 mm/s 7.5 kW 1750 mm 1500 mm 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve Itodpfx Aewir Acscrsh € on Request Pressur switch € on Request

Condition: new, Year of construction: 2020, pressing force: 300 t, machine/vehicle number: DF0240 - Rev.00, pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Isdpjdxvfkjfx Acrjth Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: new, pressure: 100stroke: 300tappet area: 600 x 900table area: 700 x 1100daylight: 550rapid traverse: 100working speed: 8Return speed: 165motor: 11 - ight curtain - manual and automatic working - manual stroke adjustment by camshaft switch - maintenance free self lubricating 4-fold ram guiding - polster plate with T-slots - according to CE rules press force:100 tohydraulic pressure:240 bartable:1100 x 700 mmram dimension:900 x 600 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:8,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.180 mmwidth:1.600 mmheigth:3.150 mmweight:6.500 kg Ijdpfx Ajd Ab Ihecrjth

Condition: new, pressure: 40stroke: 500table area: 700x500daylight: 600rapid traverse: 26working speed: 9motor: 4Features:Two-stage hydraulic pump – integrated into the machine frame Itsdpfx Acewwx Arsrjh Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, die cushion stroke: 200daylight: 600pressure: 60stroke: 350 Iedped Ab Iisfx Acreth