Used Freudenberg Fainject 2000 for sale (7,522)

Condition: new, functionality: fully functional, Year of construction: 2026, BIKO B4 2014 Linear Four roll bending machine Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2014 Technical specifications: Number of Rolls: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900mm Width: 900mm Height: 1,000mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 4 mm Bending performance (full working width) 3 mm from pipe diameter 725 mm Rolling capacity (full working width) 3 mm Bending performance (full working width) 2 mm from pipe diameter 190 mm Ijdpsiinknofx Ahhjtk Standard equipment: Linear guide system for rolls movement Extremely wide bearing blocks Needle bearing for the rolls rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Isdpfod Iclrsx Ahhjtk Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: excellent (used), Year of construction: 2010, operating hours: 79,008 h, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 2,000 g, mold height (min.): 250 mm, plate length: 795 mm, plate height: 795 mm, total length: 6,000 mm, total width: 2,000 mm, overall weight: 10,950 kg, 570A-2000-800 /170 two-component hybrid injection molding machine with sorting flap (243) with sorting flap Number: 243 Availability: in stock Year of production: 2010 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Closing force [kN]: 2000 Column spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Min. mold height [mm]: 250-550 Control type: Selogica Tongue: Ijdpfxjzq A S Ij Ahhetk English, German Working hours [h]: 79008 Weight [kg]: 10,950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air valve: x5 Core string: 1x

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED Iedpfxsztvzzj Ahhjtk FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 350-2000 AX / Electric machine / Production line with Krauss Maffei LRX150-1018 robot Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm Shot weight: 720 g Injection pressure: 2420 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 810x730 mm Platen size: 1110x1030 mm Ejector: electric Clamping unit: toggle type Control: MC6 - Touchscreen Additional equipment: Electric machine: energy-saving and very quiet Euromap 67 Robot interface Air core pull x 2 on the side of the fixed platen Hydraulic core pull x 3 on the side of the moving platen Control system with hot runner nozzles x 10 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servo motor with inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Krauss Maffei LRX150-1018 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis B-rotation, Axis C – pneumatic Travel distances in axes: X-900, Y-1800, Z-2500 Iedpfx Ahszpapnohotk Safety package for robot Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 22600 kg Length/Width/Height: 8.00x2.35x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2020, operating hours: 10,150 h, functionality: fully functional, machine/vehicle number: W09D20432L1A65405, power: 515 kW (700.20 HP), first registration: 03/2021, fuel type: diesel, color: green, fuel: diesel, Equipment: additional headlights, air conditioning, all wheel drive, cable winch, compressor, cooling unit, crane, fog lights, hydraulics, parking heater, ALBACH DIAMANT 2000 W09D20432L1A65405 Registration year: 03.2021 Engine: VOLVO PENTA 565kW 760hp Rotor: Generation 6 (12-knifes), 120mm sieve Blower: TYPE 4 Accelerator: Generation 2 Crane: Type S110 F, Epsilon Equipped: DAFO vehicle fire suppression system Itedpfxsw Uddns Ahhek Engine hours: 10152 h Rotor hours: 4405 h Full maintenance and repair history. Technically clean machine, ready for work w/o investments.

Condition: used, The Unicraft SHT 2000 hydraulic scissor lift table offers a reliable solution for your lifting projects, e.g. for manually feeding whole stacks of timber into a planer or saw. With an impressive load capacity of 2,000 kg and a robust design, this lifting platform is ideally suited for use in industrial environments. This scissor lift table stands out for its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and reducing strain on the machine operator’s back. Technical data: - Load capacity: 2,000 kg - Minimum table height: 190 mm - Maximum table height: 1,010 mm - Table surface: 800 x 1,300 mm - Cable length: 3 m - Safety standard: EN 1570 - Drive: Electro-hydraulic - Motor: 0.75 kW Itodpfx Ahezrx Izohjk - Condition: New with warranty

Condition: used, functionality: limited functionality, Year of construction: 2000, Tree crown tying device: + Dröppelmann + Type: KA 2000 + Year of manufacture: 2000 + Wheel loader attachment + Hydraulically driven + Radio-controlled - WITHOUT remote control + From municipal ownership Ijdpszvqznjfx Ahhstk Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), Year of construction: 1982, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 Isdpfx Ahszvb E Rohetk - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Itjdpfozrpnlsx Ahhjk Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1998, sheet width 2000 mm plate thickness max. 4000 mm Itjdpfx Ahoztf Abjhsk make 2974 rear stop ja foot pedal ja degree steuerbar weight of the machine ca. 3,93 t

Condition: excellent (used), Year of construction: 2007, Industrial robot with cell Itodpfxjyu Ihko Ahhek Model: KR 210-2 2000 Year of manufacture: 2007

Condition: new, Forklifts and pallet trucks Jungheinrich – EFX 413 / AM 2000 X / EMC 110 / TMX 10 / BT SPE 125 Itjdpfxjy H Evks Ahhsk

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 09/2027, total length: 1,140 mm, overall weight: 285 kg, total width: 800 mm, total height: 1,620 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 285 kg, Beating machine Rego SM 2000 M The machine for all beating applications! Itjdpfxew Tqihe Ahhjk Mixing machine with timer control 2 working functions: 1 x mixing / 1 x beating Manual kettle lift Simple technology Connection: 400V, 16A CEE plug Used machine, refurbished With warranty + spare parts service + Quality from a specialist company! Benefit from over 35 years of experience! Options: New kettle New beater Ring gas burner Maintenance contract Service package Delivery service Instruction / Commissioning Visit our large exhibition of bakery machines!

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Itjdpfx Ahozumxmjhek Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Iedezumvxspfx Ahhjtk Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: new, Year of construction: 2024, Model: ER20/10-2000-H1 Payload: 20 kg Reach: 2000 mm Iodpextpkvefx Ahhjtk Axes: 6 Quantity: 5 robots! Price per unit!

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Iodjzux Elopfx Ahhotk Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: used, Year of construction: 1997, cutting length 2000 mm sheet thickness - max. 6 mm operating pressure 250 bar fabric-no. S2669 weight of the machine ca. 4,7 t Itjdpfxsztfv Uo Ahhok working width 2059 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Isdpfx Aoyv D T Tehhjtk Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, Stock number: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum platen distance: 900 mm Opening stroke: 500 mm Rotary table size D: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions L x W x H: 4.11m x 2.65m x 4.81m Total weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements Itjdpfxozfkfle Ahhjk EUROMAP 67 Handling interface EUROMAP 73 interface OPC interface

Condition: excellent (used), Year of construction: 2022, operating hours: 2,138 h, functionality: fully functional, turning length: 800 mm, turning diameter: 450 mm, spindle motor power: 11 W, spindle speed (min.): 40 rpm, spindle speed (max.): 400 rpm, spindle bore: 65 mm, travel distance X-axis: 550 mm, travel distance Z-axis: 815 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,830 mm, total length: 4,100 mm, total width: 1,960 mm, spindle nose: ASA 6, overall weight: 6,100 kg, spindle diameter: 210 mm, Equipment: documentation/manual, USED ​​2-axis lathe with Fanuc 0i-TF PLUS CNC Itsdpfx Ahozrnqxshjk

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Iedpfx Aezizkyshhetk Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Used IKA model DR 2000/30 ATEX stainless steel Dispax-Reactor. Maximum flow rated 4,000 l/h, Maximum viscosity 5000mPas (product independent). Driven by approximately 58kw electric motor. Includes frequency inverter. Itsdjzun Ebspfx Ahhok

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 85 mm, cutting width (max.): 1,200 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 6,000 rpm, overall weight: 600 kg, Equipment: CE marking, documentation/manual, saw blade guard, Model: MJ45Y 2000 Brand: PERFECT, POLAND – CE certificate – Operating manual in Polish – Spare parts available now and in the future TECHNICAL SPECIFICATIONS: – Cutting length: 2000 mm – Cutting width: 1200 mm – Cutting height at 90°: 85 mm – Tilting saw blade: 0° - 45° – Max. main saw blade diameter: 315 mm – Max. scoring blade diameter: 125 mm – Main motor power: 4 kW – Scoring motor power: 0.75 kW – Main saw rotational speed: 4000 / 6000 rpm – Scoring saw rotational speed: 8000 rpm – Carriage guided on steel rods – Two separate motors – S1 motor – suitable for continuous operation – Outrigger-mounted guard – required by H&S regulations – Centralized lubrication – Parallel fence with fine adjustment – Extendable fence up to 2300 mm – Two hinge stops / catches – Aluminum sliding table, width: 370 mm Iedpfjyuf Eysx Ahhetk – Sliding table with stepless locking – Electronic saw angle indicator – Tiltable upper extraction hood – Fence / protractor for angled cuts – Extraction ports: Ø 100 mm, Ø 80 mm – Table dimensions: 1850 x 1700 mm – Table height: 880 mm – Table extension: 660 x 765 mm DIMENSIONS WHEN ASSEMBLED: – Length: 2800 mm – Width: 2000 mm – Height: 1340 mm – Weight: 620 kg PACKAGING DIMENSIONS: – Length: 2070 mm – Width: 1100 mm – Height: 1250 mm – Weight: 620 kg