Used Güntner Condenser for sale (962)

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Djdov Aip Uspfx Aptjcl -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: used, mileage: 2,62,130 km, power: 315 kW (428.28 HP), first registration: 09/2015, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 3,350 kg, empty load weight: 14,650 kg, next inspection (TÜV): 10/2025, wheelbase: 4,200 mm, brakes: constant throttle, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mercedes PowerShift 3, rental car, 1x comfort seat, heated seats, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), power take-off, raised exhaust, automatic transmission, differential lock, fog lights, work lights, rotating beacon, storage box, leaf air suspension, roof hatch, radio remote control, green environmental sticker. Wheelbase: 4200 mm. Body: Müller Canalmaster CM F 80 ET suction and flushing truck with approx. 8m³ (6,500l sludge chamber/1,500l water chamber) and radio remote control. Front axle 9t, rear axle with 300 planetary gears 13.4t, electronic braking system with ABS and ASR, disc brakes with partial protection front and rear, condensate monitoring for the compressed air system, front stabilizer, additional stabilizer for rear/trailing axle, aluminum front underrun protection, residual heat recovery, auxiliary hot water heating, construction site filter, PSM, reversing alarm, CompactSpace, comfort locking system, Power drive program, Mercedes PowerShift 3, clutch-dependent NMV MB 1.2, NMV transmission lock, transmission oil cooling, refrigerator, ESP: Wittig Aqualine 1600 water ring vacuum pump 400mbar/1300m³/h Uraca KD 716/G 60-110/MU high-pressure piston pump 170bar at 325l/min Operating hours Vehicle: 11112h Dodpfxswc D Dfs Aptecl Body: 2474h ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: new, power: 290 kW (394.29 HP), fuel type: diesel, empty load weight: 7,540 kg, maximum load weight: 12,960 kg, overall weight: 20,500 kg, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 4,500 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. Mercedes PowerShift 3, company ownership, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, roof hatch, green environmental sticker. Wheelbase: 4,500 mm. 8t front axle; rear axle with 300 crown wheel and hub reduction, 13.4t. Electronic braking system with ABS and ASR, switchable ABS, disc brakes with full protection on front and rear axles, electronic parking brake, condensate monitoring for compressed air system, stabilizers on front and rear axles, seat belt monitoring system, construction site filter, PSM 2nd generation, reversing warning system, CompactSpace, light sensor, off-road driving program, Mercedes PowerShift 3, Multimedia Cockpit, daytime running lights, high-performance engine brake, transmission oil cooling, transmission lock for NMV, NMV clutch-dependent MB 1.65, rear engine PTO for hydraulic pump SAE A. New vehicle from stock with day registration on 24.11.2025! Frame length approx. 5,400 mm. Frame height approx. 1,120 mm. Dedpfxjxzkcpo Aptecl ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale and errors!

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, Dcjdpfxox Dihce Aptjl - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Year of construction: 2022, condition: ready for operation (used), This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine. • Max. measuring length (W × D × H): 10,000 mm × 3,500 mm × 5,000 mm • Certified measuring range (W × D × H): 3,000 mm × 1,500 mm × 1,500 mm • Measurement accuracy: ±(28 + 5 L/1000) μm* • Repeatability: ±10 µm • Minimum display unit: Distance: 0.001 mm, Angle: 0.001° • Rotation angle of the measuring head: Horizontal ±90°, Vertical ±30° • External input 2 voltage-free inputs • Communication • Bluetooth communication Bluetooth 5 • USB communication USB 3.0 • Infrared communication 945 nm • Power supply: Powered via supplied mains adapter • Rated voltage: 24 V DC • Current consumption: 1.7 A • Environmental conditions: Operating ambient temperature +10°C to +35°C • Operating relative humidity: 20 to 80% (non-condensing) • External dimensions: 327.7 mm × 250.9 mm × 357.3 mm Additional equipment • Measuring Head WM 3000 • USB Cable • Power Supply • Measuring Probe WMP3000 • Probe Tip Ø 5 mm • Calibration Device • Tripod • 3D-CAD Add-on Software • Transport Case • 4x Batteries for Measuring Probe Dodpex D Sdaofx Aptocl Machine Benefits Technical Machine Benefits • Battery charger • Dongle for measuring software Extra Information Machine still under power

Condition: used, mileage: 2,97,000 km, power: 294 kW (399.73 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,190 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good and reasonably priced vehicle with a verifiable service history from our company! MB ACTROS 2540 FULL COMBINATION with certified BÖSE curtain-sider swap bodies Rear load securing 2 x BÄR tail lifts 2,500 kg Steerable tag axle Dsdpjyamknefx Aptocl Retarder Special Equipment: Lockable overhead storage above the windscreen, front axle load 8.0 t, driver's side airbag, LED ambient lighting (driving and living area), Economy equipment package, Media equipment package, standard and DuoMatic brake couplings, Interactive multimedia cockpit, air horn, driver assistance system: turning assistant, driver assistance system: roll control assist, cab with air suspension, vehicle without trailer coupling, vehicle without front radiator grille, vehicle without front splash guard, vehicle without rear underrun protection, regulated alternator 150 A, 12-speed transmission - type: G 211-12, notebook holder, comfort telephony (Bluetooth) with inductive charging tray, 3-piece mudguards, 3-piece mudguards without splash guard, cool box/refrigerator, aluminium rims 9.00x22.5 (ALCOA matt), adjustable roof air deflector, 2-cylinder air compressor, reinforced engine brake, 7.5 t steered and liftable tag axle, wheelbase variant 4,900 mm, rear frame overhang 2,250 mm, residual heat utilization, retarder, acoustic reversing warning (external warning signal), tail lift switch, reinforced rear cross member, fleet management interface, velour upholstery/passenger seat, velour upholstery/driver seat, cab seats: armrests both sides passenger seat, cab seats: driver comfort suspension seat, external sun visor, side window roller blind driver's door, external left storage compartment, additional 12V / 15 A socket in passenger footwell, additional 12V socket, 24V / 25 A socket in passenger footwell, 24V socket in right storage compartment, automatic daytime running light, pre-installation for central axle trailer coupling, pre-installation for 4 surround cameras (display via monitor), sleeper cab curtain, additional thermal insulation Further Equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 5, Actros L cab, heated front/start-off mirror, 2-line trailer brake, connections on the left, 24V / 15-pin trailer socket, exhaust outlet to vehicle center, Powertrain 2 equipment package, MirrorCam exterior mirror camera, 220 Ah battery, batteries mounted side by side, rear axle differential lock, air connection in cab, steel air reservoirs, air unit with condensate monitoring, medium air unit, automatic activation of driving lights (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), driver assistance system: Lane Keeping Assist, cab: fixed entry, cab: chrome interior package, cab: hydraulic tilting mechanism, cab: L StreamSpace, 2.30 m, tunnel 320 mm, vehicle perimeter LED lights, full air suspension, electric windows, vehicle without rear window, speed limiter, AdBlue tank 60 litres, rear axle with active lubrication, unregulated, rear axle crown wheel 440, chassis/body: chassis, lower comfort bunk, central locking system, fuel tank: 290 litres aluminium, left, electronically regulated steering pump, multifunctional steering wheel, air su...

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: API629410, Technical characteristics: Core Specifications Attribute Value Motor Power: 55 kW (75 hp) Maximum Working Pressure: 7.5 bar Free Air Delivery (FAD): approx. 174.4 l/s (approx. 369 CFM) Cooling Type: Air-cooled Noise Level: approx. 67 dB(A) Dedpfjyam Nqsx Aptecl Drive Type: Gear-driven Integrated Dryer: Yes (Full Feature “FF” version) Electrical Supply: 400V / 50Hz Regulation System: Full load / no load with Elektronikon® controller Dimensions (L×W×H): approx. 1656 × 1100 × 1968 mm Weight: approx. 1100 kg Design & Features: - Sound-attenuating enclosure: Steel canopy with flame-retardant insulation for quiet operation. - Elektronikon® Controller: 3.5” color display with programmable pressure bands, remote monitoring, and auto-restart capability. - Zero-loss condensate drain: Integrated into the dryer for efficient moisture removal without wasting compressed air. - Integrated moisture separator: Labyrinth-style, built into the aftercooler for enhanced air quality. - IP55-rated motor: Dust and water-resistant, suitable for industrial environments. Reliability & Maintenance: - Synthetic oil: Rated for 8,000-hour change intervals. - Spin-on oil filter: With integrated bypass valve for easy servicing. - ASME-approved air/oil separator: For long service life and minimal oil carryover. Machine status: WORKING

Condition: new, mileage: 200 km, power: 170 kW (231.14 HP), fuel type: diesel, overall weight: 8,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, total height: 2,746 mm, loading space length: 3,793 mm, loading space width: 2,352 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Mercedes-Benz Atego 823 Tipping Truck with MEILLER Body Mercedes-Benz OnRoadService ATS Warranty according to General Terms and Conditions, 3 years/250,000 km ATS Warranty according to General Terms and Conditions, 4th year/340,000 km ----Cab Interior: Radio with USB & Bluetooth * Bluetooth Hands-free System * Instrument Cluster, 12.7 cm * Rear View Camera with External Monitor * FleetBoard Eco Support * Truck Data Center 8, Base * Air Conditioning * Light Sensor * Rain Sensor * 2 Remote Control Keys * Central Locking System * Driver's Suspension Seat, Comfort with Armrests on Both Sides * Passenger Fixed Seat, Standard * Electric Windows, Both Sides ----Clutch & Transmission: Diesel Engine OM 934, R4, 5.1 l, 170 kW (231 hp), 900 Nm * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Driving Program: Economy/Power * Auxiliary Drive MB 60-2c, MPA low * Meiller Pump, 7-Piston, Type 270/45 ----Axles & Suspension: Front Axle, 4.1 t * Rear Axle, Crown Wheel 325, Hypoid, 6.2 t * Differential Lock Rear Axle * Axle Ratio i = 3.636, Rear Suspension, 5.7 t * Steep Shoulder Rims 6.00 x 17.5 * Wheel Nut Cover * 2x 215/75 R 17.5 Road Michelin X MULTI Z, D27M76 80 * 4x 215/75 R 17.5 Traction (M+S) Michelin X Multi D TL ----Frame & Frame Components: Steering ZF 8095 * Exhaust System, on the frame right, tailpipe pointing inwards * Front Underrun Protection ECE * Ringfeder Drawbar Coupling * Low Drawbar Coupling, Ball Head up to 3.5 t, D27.1 * Hydraulic Connections for Tipping Trailer * Disc Brakes, on Front and Rear Axle * Electronic Braking System with ABS and ASR * Electronic Compressed Air Supply Unit, Medium * Heater for Electronic Compressed Air Supply Unit * Condensate Monitoring, for Compressed Air System * Trailer Brake, 2-Line ----Cab Exterior: S-Cab Classicspace * Cab Rear Wall, with Window * Roof Hatch/Ventilation Flap Roof * Cab Entry, Two-Step * Heated Front Mirrors * Main Mirrors, Electric Driver Side * Exterior Sun Visor, Transparent ----Electrical System / Electronics: LED Daytime Running Light * Side Marker Lights, Flashing * Rotating Beacons Dcodpfey Dzfvjx Aptol * Trailer Socket 24V, 15-Pole * Trailer Socket 12V, 13-Pole ----Assistance Systems: Driving Assistance Package Europe * Attention Assist * Traffic Sign Assist * Active Sideguard Assist 2 * Frontguard Assist * Stability Control Assist (ESP) * Tire Pressure Monitoring System * Lane Keeping Assist * Active Brake Assist 6 * Cruise Control * Preparation for Alcohol Tester with Immobilizer ----MEILLER TRIGENIUS Three-Sided Tipping Body: Access to Tipping Platform * Lashing Points in the Floor * Front Wall Height 700 mm * DIMENSIONS: L 3.80m, W 2.35m, H 0.40m ----* PTO MB 60-2c, MPA low, N-Speed * Meiller Pump, 7-Piston, Type 270/45 * Low Drawbar Coupling, Ball Head up to 3.5 t, D27.1 * Ringfeder Drawbar Coupling * Drawbar Coupling G 135, for ZAA ----Suitable for Crane: HMF 910 K3 Loading Crane (SN: 1340988), 3x Hydraulic Extension, Remote Control, 5th + 6th Control * Tire Dimension Front Axle: 235/75R17.5 * Tire Dimension Rear Axle: 235/75R17.5 * Fuel Tank: 120 liters * AdBlue Tank: 25 liters * Technical Gross Vehicle Weight: * Unladen Weight: * Permissible Trailer Load: * Overall Length: * Wheelbase: 3320 mm ----Vehicle Number: 11948----Errors and prior sale are reserved----Advertising and various lettering have been digitally removed.----We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of t

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 40,000 kg, tire size: 325/95R24, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, long cab, 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, aluminum fuel tank, green environmental sticker. Wheelbase: 3600 mm, 8t front axle, rear axle planetary gear 16t, crown wheel 300, electronic braking system with ABS and ASR, ABS switchable, drum brakes on front and rear axle, stabilizer on front axle, condensate monitoring for compressed air system, electronic parking brake, smoker package, seatbelt monitoring, lower comfort bed, construction site dust filter, electric lifting roof, prep for upper comfort bed, reversing warning system, StreamSpace, light sensor, economy/power driving programs, Mercedes PowerShift 3, PowerShift Advanced, multimedia radio with touch display, classic dashboard, tank capacity: 320l + 480l, transmission oil cooling, LED daytime running lights, high performance engine brake, protection plate under bumper, cyclone pre-filter for coarse dust, Grounder, PTO MB 131-2c pump. Export only! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted! Dedsyrt Siopfx Aptscl

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 341 kg, input voltage: 400 V, total width: 780 mm, total length: 1,870 mm, total height: 1,450 mm, warranty duration: 12 months, Aircooled chiller MTA TAE EVO TECH 081 22 KW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Finned evaporator immersed in tank. Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. Hydraulic module: 1 pcs. water pump Lowara CIE120/5/D, expansion vessel, buffer tank. Dimensions: 1.87x0.78x1.45 m. Weight: 341 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Djdpfsxwcafex Aptjcl LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), Airrex AH 800i Dcodpfxeylv Dze Aptjl Mobile Infrared Heater Tank: 70 l Output: 22 kW Suitable for spaces up to 2000 m³ Highly economical – fuel consumption 1.7 – 1.9 l/hr Dimensions (LxWxH): 130 x 35 x 134 cm Weight: 81 kg Adjustable temperature range: 0 – 40°C Mobile, mounted on caster wheels Ready to use immediately – just plug in and switch on Clean combustion – no chimney required! App-controlled – set temperature, receive notifications, and check fuel level directly on your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no combustion odors Complies with the latest EU emissions directive Automatic restart after power failure

Condition: used, mileage: 1,62,192 km, power: 335 kW (455.47 HP), first registration: 02/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,440 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, 2846 Actros Roll-off Body + PK 28002 Tec E Crane + Grapple Wheelbase: 4.80 m Suspension: Leaf-air suspension Palfinger Crane Type: 28.002 TEC E Operating hours: 2438 h 6x Hydraulic extension 2x Hydraulic outriggers 5+6 control + Remote control + Grapple Palfinger Roll-off Hook Year of manufacture: 2022 Special equipment: Axle load measuring device, front axle load 9.0 t, equipment package: Driving, right exterior mirror with maneuvering position, electric sun visor for windshield, sun visors for side windows, driver and passenger door, sun visor for driver's side window, equipment package: Media, equipment package: Visibility, Bi-Xenon headlights, LED taillights, headlight cleaning system, 220 Ah battery (AGM), standard and DuoMatic brake connections, interactive cockpit multimedia system, navigation system, remote query function Remote Online, additional compressed air tank, air horn, cab: with air suspension, suspension: front springs 9.0 t, 3 leaves, additional parking brake on front axle, fire extinguisher, vehicle without MirrorCam exterior mirror camera, 12-speed transmission - type: G 281-12, notebook holder, rear axle planetary gear 485, folding table in bulkhead, automatic climate control, comfort telephony (Bluetooth) with inductive charging cradle, additional fuel pre-filter, fuel tank: 390 L aluminum, left, cooler box / refrigerator, cooling capacity for hot climates, steering oil cooler, air intake behind cab, air filter: cyclone air filter, 2-cylinder air compressor, rear engine PTO, ISO pump, reinforced engine brake, reinforced engine mounting, reinforced engine compartment encapsulation, trailing axle 8 t steered, relief-valved, liftable, auxiliary drive MB 123-10c, programmable special module, PremiumComfort mattress lower, wheelbase variant 4900 mm, frame lowering with bellows residual pressure control, frame overhang 2550 mm, reversing warning sound and flashing warning light (external warning signal), switch for loading platform, disc brakes with partial protection, interface for fleet management system, fuse box, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat leather, seats in cab: armrests on both sides of passenger seat, seats in cab: driver seat with massage function, seats in cab: driver seat comfort suspended seat, external sun visor, stowage flap on the outside left, 12V / 15 A socket in the passenger footwell additionally, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, door extension for cab, additional thermal insulation, two-plate clutch, oil cooler transmission Additional equipment: Emission standard EURO 6, storage compartment above windshield with lid, axle configuration: 6x2, Actros 5, Actros cab L, heated approach / front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, exhaust tailpipe to the center of the vehicle, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entry fixed, cab: interior package chrome, cab: tilting mechanism hydraulic, cab: L ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab variant: L, stowage flap on the outside right, bumper corners a Dedpfx Apjzn Dbrjtscl

Condition: used, mileage: 22,400 km, power: 115 kW (156.36 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 4,798 kg, maximum load weight: 2,692 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, next inspection (TÜV): 03/2027, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, short cab, suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame cladding, differential lock, rotating beacon, leaf spring suspension, trailer hitch ball head, trailer hitch air + light, lashing eyes, U-shaped protection, swing flaps, sunroof, green environmental badge. Djdpfx Apozn N Sistscl Wheelbase: 3020 mm, Body: Meiller 3-way tipper body, Front axle: 4.1 t, Rear axle: planetary gear 325, hypoid, 6.2 t, Differential lock rear axle, Electronic braking system with ABS and ASR, Disc brakes, on front and rear axles, Condensate monitoring, for compressed air system, Stabilizer, under frame, Rear axle, Seatbelt monitoring, Standard cockpit, Pollen filter, ClassicSpace, Rain and light sensor, Driving program economy/power, Mercedes PowerShift 3, Pre-installation for toll collection, Daytime running lights, Engine brake, PTO MB 60-1c, Pump, Meiller pump, 5 pistons, Type 254/1, Lashing recesses, in the tipper body floor, Stability control assistant (ESP), Lane keeping assistant, Active Brake Assist. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Dcsdpfxoy Hkd Hj Aptsl Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air Dedpfx Apezbypyetecl PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: reconditioned (used), Title:RHOSS TCHVBZ 2630 – 621 kW Water-Cooled Chiller | Bitzer Screw | Refurbished Headline: Industrial-grade Rhoss water-cooled chiller, fully refurbished and field-tested. Equipped with 2× Bitzer screw compressors, Carel Smart Controller, and energy-efficient R-134a refrigerant — engineered for demanding industrial cooling applications. TECHNICAL SPECIFICATIONS Specification Value Brand / Model RHOSS TCHVBZ 2630 Type Water-Cooled Chiller Condition Refurbished / Tested Cooling Capacity 621.6 kW (534,500 Kcal/h) Refrigerant R-134a Compressors 2 × Bitzer Screw CSH8581-125Y-40P Evaporator Shell & Tube – DN150 Connection Condenser Shell & Tube – DN125 Connection Control System Carel Smart Controller Dimensions (mm) 4070 × 1300 × 1960 Weight 3,297 kg Location Seyhan / Adana, Türkiye TECHNICAL OVERVIEW Industrial-grade Rhoss water-cooled chiller — fully refurbished, field-tested, and verified to meet international performance standards. Equipped with high-efficiency Bitzer screw compressors and a Carel Smart Controller for stable, energy-efficient, and long-term operation. Optimized for demanding industrial applications where reliability and uptime are critical. WHY CHOOSE THIS UNIT Fully refurbished and performance-tested Equipped with high-efficiency Bitzer screw compressors Reliable and durable for continuous industrial operation Energy-efficient R-134a refrigerant Backed by professional after-sales service and spare parts inventory Fast commissioning and on-site technical consultation available ABOUT ÖZSAYIN COOLING SYSTEMS With more than 40 years of experience in industrial refrigeration, Özsayın Cooling Systems provides complete turnkey solutions: Supply of new or refurbished chillers (10 – 2,500 kW) Short- and long-term rental options On-site installation, commissioning, and maintenance Extensive spare parts inventory for global brands (Carrier, Trane, Daikin, York, Bitzer, Rhoss, Climaveneta, McQuay, etc.) 24/7 technical service and engineering consultancy Dcedpoy Umf Nsfx Aptjl RENTAL OPTION AVAILABLE This unit is available for short- or long-term rental under flexible terms. Contact us for a customized quotation and technical consultation tailored to your project requirements. CONTACT Mr. Samet Özsayın – Özsayın HVAC Technologies Seyhan / Adana, Türkiye Last Updated: 26.08.2025 HASHTAGS / KEYWORDS #ozsayin #bitzer #rhoss #watercooledchiller #industrialchiller #r134a #coolingsolutions #hvacturkey #chillerrental #refurbishedchiller #screwcompressor #carelcontroller

Condition: used, Quantity: More than 40 available Manufacturer: Indu-Sol Type: PNMA II PROFINET measuring device, version 3.0 (114090100) Mounting: 35 mm DIN rail Dimensions: 105 × 39 × 74 mm Weight: 310 g Input voltage: 24 V DC (20-28 V, reverse polarity protection) Output voltage: 24 V DC (max. 1 A) Dodpfx Apszlt Hxjtjcl Current consumption: approx. 50 mA Power dissipation: approx. 1 W Protection rating: IP20 Connector: RJ45 Delay: < 1 bit/s at 100 Mbit/s Cable length: up to 100 m (Cat5/Cat5E) Operating temperature: 0 °C to +70 °C Storage temperature: -15 °C to +75 °C Humidity: 10 – 90 %, non-condensing

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Dcodpfszhkfqex Aptsl Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Condition: used, mileage: 14,855 km, power: 115 kW (156.36 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 4,798 kg, maximum load weight: 2,692 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, short cab, suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame cladding, differential lock, rotating beacon, leaf spring suspension, trailer hitch ball head, trailer hitch air + light, lashing eyes, U-shaped protection, swing flaps, sunroof, green environmental badge. Wheelbase: 3020 mm, Body: Meiller 3-way tipper body, Front axle: 4.1 t, Rear axle: planetary gear 325, hypoid, 6.2 t, Differential lock rear axle, Electronic braking system with ABS and ASR, Disc brakes, on front and rear axles, Condensate monitoring, for compressed air system, Stabilizer, under frame, Rear axle, Seatbelt monitoring, Standard cockpit, Pollen filter, ClassicSpace, Rain and light sensor, Driving program economy/power, Mercedes PowerShift 3, Pre-installation for toll collection, Daytime running lights, Engine brake, PTO MB 60-1c, Pump, Meiller pump, 5 pistons, Type 254/1, Lashing recesses, in the tipper body floor, Stability control assistant (ESP), Lane keeping assistant, Active Brake Assist. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Dsdpfx Aozhu Hfeptecl

Condition: used, mileage: 38,489 km, power: 175 kW (237.93 HP), color: black, gearing type: automatic, total length: 78,500 mm, total width: 25,500 mm, total height: 36,500 mm, loading space length: 60,600 mm, loading space width: 24,800 mm, loading space height: 24,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, power assisted steering, - Air suspension, rear Dsdpfxoztlrcs Aptecl - Air suspension, front For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. Mercedes-Benz Atego 824 L platform/tarpaulin + tail lift 6-cylinder engine! Tail lift: BÄR BC 1000 S4-A4 (1,000 kg), A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5S axle ratio i = 3.636, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B5B trailer brake, 2-line system, C2J wheelbase 4220 mm, C5I fastening parts, for platform, C6B steering ZF 8095, C6S stabilizer, for extreme high load, rear axle, C7E front underrun protection (ECE), steel, C7M protection device, lateral, weight-optimized, C8J splash guard, in the fender, C9L extended frame overhang, 200 mm, C9Y omission of rear underrun protection (ECE), D1B driver's air-suspended seat, standard, D1M co-driver's fixed seat, simple, D1Z center seat, with 3-point safety belt, D3X seat cover, plain weave fabric, D4A standard cockpit, D4W window lift, electric, on both sides, D4Y sun visor, lateral, driver's side, D6F air conditioning, D6Y pollen filter, D7A additional thermal insulation, D7L storage compartment, above the windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0E batteries from Banner, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E2J fuse box, E3F additional socket 12 V/15 A, railing, E4B interface, fleet management system FMS, E5A switch no. 1 for external superstructure electrical system, E6A trailer socket 24 V, 15-pin, E6Y reversing warning, combined with hazard warning lights, E7F cable remote control for air suspension, E9H preparation for tail lift control, F1X S-cab ClassicSpace, 2.30 m, tunnel, F5L exterior sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7V cab entry, two-step, F8L immobilizer, with transponder, F8X rain/light sensor, G0U economy driving program, G1D gearbox G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0I tires tubeless, 235/75 R 17.5 front axle, I4A wheel formula 4x2, I6X air suspension, rear axle, J1A combination instrument, 10.4 cm, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeaker, 2-way system, J3N Fleetboard Eco Support, J5S radio, with USB connection and Bluetooth, J9D preparation for toll collection, J9N preparation for Truck Data Center 6 (DTCO), K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5S protective cap for AdBlue dosing system, K7I exhaust system, on the frame on the right, tailpipe pointing inwards, L1B daytime running light, L1H fog lights, halogen, M0S noise encapsulation, according to ECE, M2A engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, M5C engine version Euro VI, D, M5V High Performance Engine Brake, M8Z fuel preheating, P0L tail lift preparation, Atego, Q1D front spring 4.0 t, parabolic, Q7B trailer coupling Ringfeder, Q7R trailer coupling G 135, for ZAA, Q8Y cross member, later installation of AHK G135 ZAA, R0Z wheel nut cover, R1B steep shoulder rims 6.75 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5Z cruise control, T0J weight variant 7.49 t (3.8/5.0), X2T maintenance documentation, Z4E in-line engine, 6 cylinders, Z5C OM 936, cargo space

Condition: used, mileage: 35,700 km, power: 350 kW (475.87 HP), first registration: 04/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Dedpfx Apezuhx Ietjcl Storage above windshield, lockable, Axle load - measuring device, Axle load front axle 8.0 t, Working lights, Audio system: Digital radio DAB / DAB+, Equipment package: Economy, Equipment package: Climate, Equipment package: Comfort, Equipment package: Media, Equipment package: Safety, Equipment package: Visibility, Exterior mirror right with maneuvering position, CB radio, Compressed air horns (2) on cab roof, Electrical pre-equipment in cab 24V / 100 A, Cab: Extra-Line interior, Cab: Style-Line interior, Cab: with air suspension, Cab: Shaving mirror, Fzg. without MirrorCam exterior mirror camera, 12-speed gearbox - type: G 281-12, Integral rear, Folding table in parapet, Comfort telephony (Bluetooth) with induction charging cradle, Comfort couch top, wide, 3-piece mudguards, Fuel tank: Combi tank aluminum - 720 l diesel + 75 l urea solution (AdBlue), Fuel tank: Additional tank 290 l aluminum, right-hand side, Steering wheel with multifunctional steering wheel, Fuel tank: Additional tank 290 l aluminum, right-hand side, Steering wheel with multifunctional steering wheel. aluminum, right, steering wheel with multifunction (leather), mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, engine brake reinforced, auxiliary drive MB 131-2c, on-board unit for toll collection, wheelbase variant 3700 mm, frame height lowered 25 mm, smoker package, residual heat utilization, retarder, reversing alarm acoustic and hazard warning light (warning signal outside), fifth wheel coupling: Low-maintenance, lubricated lock, key with additional remote control (2), fleet management system interface, drawers under sill, power steering Servotwin, seat cover/upholstery: passenger seat leather, seat cover/upholstery: driver's seat leather, seats in cab: Armrests on both sides of front passenger seat, Seats in cab: front passenger seat Swivel seat comfort, Seats in cab: front passenger seat backrest can be folded down, Seats in cab: driver's seat with massage function, Seats in cab: driver's seat Swivel seat comfort, Sunblind electr. for windscreen, sun blind side windows, driver and passenger door, sound system, storage flap outside left, additional 12V / 15 A socket in passenger footwell, additional 12V volt socket, preparation / switch for lift axle on semitrailer / trailer, preparation for work lights on rear wall of cab above, preparation for additional headlights, curtain for sleeper cab, seat belt warning device Further equipment: EURO 6 emissions standard, Axle configuration: 4x2, Actros 5, Actros cab L, Heated approach/front mirror, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Access to cab left, Exhaust to right outside, Equipment package: Powertrain 2, Batteries arranged side by side, Differential lock rear axle, Torque increase 12. Compressed air connection in cab, Compressed air tank steel, Compressed air unit with condensation water monitoring, Compressed air unit medium, Automatic switch-on for headlights (light sensor), Driving assistance system: Attention Assist (drowsiness detection sensor), Driving assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5), Driving assistance system: Lane departure warning system, Cab: rigid cab access, Cab: chrome interior package, Cab: hydraulic tipper, Cab: L BigSpace, 2.50 m, level floor, Vehicle clearance lights LED, Suspension: air / air (full air), Electric windows, Tinted windscreen, Fzg. without rear window, alternator 10

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,480 kg, input voltage: 400 V, total width: 2,280 mm, total length: 5,000 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER SWEGON COBALT PRO HE LN 37.2 350 KW Cooling capacity: 350.0 kW / 99.52 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Dsdpfxszqzhno Aptecl Compressors: 2 pcs. Bitzer CSH7593-90Y-40D (screw) Type of refrigerant: R1234ze Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.0x2.28x2.45 m Weight: 4480 kg Working hours: 620/870 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Weiss Temperature Chamber We offer a Weiss temperature chamber here. Weiss temperature chamber, air-cooled with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temporal temperature deviation in the center of the useful space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough integrated in the standard configuration R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation of water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Dsdpfxjzfy Rwo Aptecl Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the telephone.

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Dedjy T Iyfepfx Aptjcl

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Dcodpfx Apezg Er Aotel Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.