Used Gerd Wolff Vkue 1200 for sale (5,091)

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 11,500 h, load capacity: 20,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,800 mm, fork carriage width: 2,900 mm, fork length: 2,400 mm, total length: 6,100 mm, drive type: Diesel, construction width: 3,050 mm, Heavy-duty forklift - Diesel Load center: 1200 Mast type: Duplex Transmission: Clark HR32 - overhauled in 2021 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Lsdpfx Ajzu T Rpoi Hjrr Rear tire size: 14.00-24 Rear tire condition: 60 - 80% New: Forks, lifting chains, front tires

Condition: good (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, input voltage: 240 V, input current: 12 A, STRATASYS DIMENSION SST 1200 3D Printer - Frequency: 50/60 Hz - Rated current: 12 - 6 A - Internal dimensions: approx. 400 x 400 x 500 mm - Includes matching accessories Note: The item must be collected between September 8th and September 10th, 2026, on a date to be confirmed. Lrsdpjzldwhjfx Ai Her FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 Lrodpfx Aijwugczj Hjr 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: like new (used), Manufacturer: Schenck Size: 1.600 x 1.200mm Unbalance Motor: 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. – 3,7 / 2,15A) With Rubber Protection. Springs included Lrodpfxeg Snvmo Ai Hjr

Condition: excellent (used), Year of construction: 1999, operating hours: 40,000 h, functionality: fully functional, color channels: 5, Good working condition, belt width 1200mm Ledpfx Ashtncuji Horr

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm length: 1200 mm Max. drilling diameter in cast iron: 60 mm Max. tapping diameter: 40M Max. drilling diameter in steel: 50 mm Stroke of quill: 110 mm Ledpozvfn Njfx Ai Horr Max. distance spindle to table: 1165 mm Min. distance spindle to table: 300 mm Floor/table area: 1400 x 580 mm Speeds/ranges: 1460 rpm Spindle taper: 5ISO/BT/MK Length: 2300 mm Width: 1100 mm Height: 2400 mm Weight: 2700 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 +Controller +TPU DEMO ROBOT as new Lrodpjxq Tu Tsfx Ai Hor DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, sepqrator sepamatic 1200 two sieves, 3mm and 5mm. Lsdpfxszgu Awj Ai Herr

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera Lrsdpfx Asyxfrpoi Hsr ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: used, Year of construction: 1999, Technical details: working area: 10700 mm Tube length: 300-11000 mm min. workpiece diameter: 80 mm max. workpiece diameter: 260 mm Power: 120 KW dimensions: 21,5 x 5 x 3,8 m mm weight: 90.000 kg pre-turn capacity: 200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Lrodpfevizuiox Ai Her Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1 *

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 13,300 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,185 mm, power: 157 kW (213.46 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,500 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift - diesel Load center: 1200 Ledszt Dyropfx Ai Hsrr ISO class: Terminal West Mast type: Duplex Transmission: Clark 13.7HR28316 Condition: Operational and fully functional Technical condition: good Front tire size: 12.00-20 Rear tire size: 12.00-20 Sideshift, fork positioner,

Year of construction: 2019, condition: excellent (used), Image-guided 3D coordinate measuring machine Lodpfx Aioih R Uxe Herr Manufacturer: Keyence Type: XM-1200 series Year of manufacture: 2019 Control system: Keyence Technical data: ----- • Camera chip: 4 MP CMOS • Measuring range: 600 x 300 x 200 mm • Smallest display unit: 1 µm • Smallest angle: 0.0001° • Repeatability (locked): ±3 µm • Maximum table load: 25 kg • Display: 15" TFT • Weight: 40 kg Accessories: ----- • Manuals • As-delivered condition (Datasheet attached)

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 720 kg, warranty duration: 12 months, welding current (min.): 800 A, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, The SITEC ITR1200 CN is a tilting rotary table with CNC control, designed for circumferential welding of large components. Thanks to its robust structure, brushless drive, and fully programmable management, it guarantees high precision, reliability, and repeatability of the processing cycles. Key features: Table diameter: 1,000 mm Maximum load in the horizontal plane: 1,200 kg Rotation speed: 0.04 – 2 revolutions/min Bending moment: 300 kgm Torque: 150 kgm Hydraulic tilting: 0° – 100° Welding processes: TIG / MIG Brushless motor with permanent magnets and digital control CNC with integrated PLC Touch screen display for programming and cycle management Storage and retrieval of welding programs Setting of overlap, number of tack welding points, and processing parameters Rotating mass 800 A High-rigidity, electro-welded steel structure Advantages: High precision and repeatability of welding Complete control of processing cycles Reduced setup times High-efficiency and low-maintenance brushless drive Ideal for industrial production and heavy-duty machining Ledezlih Sepfx Ai Horr Applications: Particularly suitable for welding tanks, vessels, flanges, dished ends, large-diameter pipes, and components for the energy, plant engineering, shipbuilding, and metalworking industries. Customization: The machine can be configured with numerous optional features and accessories, including pneumatic torch holders, dedicated supports, and further customizations to adapt to specific production requirements. For more information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 411 h, functionality: fully functional, chuck outer diameter: 1,200 mm, spindle speed (max.): 300 rpm, spindle speed (min.): 2 rpm, turning diameter: 1,600 mm, Massa Heavy Duty Precision CNC Vertical Borer Model: VL-1200 ATC + C Control: Fanuc 18i TB Year: 2008 Max Swing Dia:1600mm Max Turning Dia: 1350mm Max Turning Height: 1250mm 4 Jaw Scroll Chuck Dia: 1200mm Table Speeds: 2-300 RPM 16 Station Tool Changer ‘C’ Axis 360 Degrees ‘C’ Axis Milling Spindle BT 50 Lrjdezv T A Ijpfx Ai Her Dimensions: 6300 x 4500 x 5800mm Weight: 33,000 KGS

Condition: good (used), Refurbished machine Ledpfx Aij E Dquj Hsrr Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: used, functionality: fully functional, machine/vehicle number: E1X359200040, Year of construction: 2009, operating hours: 8,800 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,160 mm, power: 142 kW (193.07 HP), fork carriage width: 2,540 mm, fork length: 2,700 mm, empty load weight: 25,920 kg, drive type: Diesel, Heavy-duty forklift – diesel Chassis number: E1X359200040 Load centre: 1200 Fork width: 280 mm Fork thickness: 90 mm Mast type: Duplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres size: 12.00-24 Front tyres condition: 40 – 60% Rear tyres type: Superelastic Rear tyres size: 12.00-24 Rear tyres condition: 20 – 40% Description: Camera, central lubrication Lrodexybduepfx Ai Hor Sideshift, fork positioner, 4th valve, full cabin,

Condition: used, functionality: fully functional, load capacity: 16,000 kg, fork length: 4,000 mm, Forks Load center: 1200 mm Lredpfx Aisytkkxo Hjr Fork width: 200 mm Fork thickness: 100 mm Condition: Ready for operation and fully functional Technical condition: Good Description: In addition to this MAKE - MODEL, we have around 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing on fair terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Please call me, Marco Levermann; I am happy to advise you in detail about this MAKE - MODEL. By the way: Our specialist forklift workshop is dedicated to the repair and maintenance of large equipment from 8 tonnes upwards. We can also offer to sell your vehicle on consignment at our premises.

Condition: excellent (used), Mettler Toledo AutoChem FCM Fluid Control Module Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Machine Type: Fluid Control Module / Fluid Handling Module Line Voltage: 220 VAC Line Frequency: 50/60 Hz Ljdpfszt Nzhox Ai Herr Offered is a Mettler Toledo AutoChem FCM Fluid Control Module for corresponding laboratory, reaction, and process systems. The device features an integrated Mettler Toledo FCM-1200 Modifier Fluid Pump, as well as the associated fluid lines, fittings, and connections. The module is designed for the controlled delivery or handling of fluids within corresponding Mettler Toledo AutoChem systems. Technical Data: Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Line Voltage: 220 VAC Line Frequency: 50/60 Hz Fusing: 4 A Time Delay Integrated Pump: FCM-1200 Modifier Fluid Pump Pump Part Number: 16001176 Interfaces / Connections: 2x REMOTE interface GPIB interface Front-side INLET/OUTLET connections Additional fluid connections on the rear of the device IEC power connector Dimensions: Width: approx. 450 mm Depth: approx. 650 mm Height: approx. 550 mm Dimensions W x D x H: approx. 450 x 650 x 550 mm Equipment: Mettler Toledo FCM-1200 Modifier Fluid Pump Integrated fluid lines and fittings INLET/OUTLET connections REMOTE interfaces GPIB interface Status indicators Metal housing with side service panel Shipping Data: Weight: approx. 50 kg Due to its size and weight, shipping by freight forwarder is planned. Condition: Used condition with signs of wear and tear consistent with age and use. The exact technical functionality has not been further verified. Condition and design, see product images. Scope of Delivery: 1x Mettler Toledo AutoChem FCM Fluid Control Module as shown. The scope of delivery corresponds to the product images. Subject to changes, errors, and prior sale.

Condition: good (used), Year of construction: 2007, functionality: fully functional, • Manufacturer: PAK-PROJEKT (Vrnjačka Banja, Serbia) • Machine type: RS-1200 • Serial number: 02 • Year of manufacture: 2007 • Application: Machine for individual cardboard packaging • Cutting cardboard sheets to size. • Scoring, i.e., creating creases to facilitate the bending of the cardboard. • Cutting corners and slits necessary for assembling the box. Lrjdpfx Aijzvdf Hj Hjr The machine is in fully working order. Output quantity depends on the size of the cardboard box – 250-800 pieces/hour.

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140 Lodpfjvv Ud Rox Ai Hsrr

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 576308, workpiece weight (max.): 7,500 kg, total height: 3,360 mm, total width: 2,150 mm, total length: 3,600 mm, table length: 1,640 mm, table height: 1,140 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,510 mm, feed length Z-axis: 650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, overall weight: 12,640 kg, Equipment: documentation/manual, CNC SINKER EDM MACHINE – OPS-INGERSOLL GANTRY EAGLE 1200 For sale: a large-format, premium-class CNC sinker EDM machine – OPS-Ingersoll Gantry Eagle 1200. Manufactured in Germany, its gantry structure (Mobile Portal) provides the highest geometric stability and micron-level precision when machining heavy molds and dies. MACHINE SPECIFICATIONS • Manufacturer: OPS-Ingersoll Funkenerosion GmbH (Germany) • Model: Gantry Eagle 1200 • Serial number: 576308 • Year of manufacture: 2009 • Conformity mark: CE GEOMETRIC PARAMETERS AND KINEMATICS (Axes) Full 4-axis system, digital AC servo drives: • X-axis travel (head): 1000 mm • Y-axis travel (portal): 1510 mm (loading position extended to 1955 mm) • Z-axis travel (slide): 650 mm Lrodjzum Ubjpfx Ai Her • Integrated C-axis: 360° rotation, 0.001° resolution, 1–20 rpm speed • Feed rate (X, Y, Z): up to 5,000 mm/min • High-Speed Jump speed: Eagle Power Jump technology up to 18,000 mm/min (18 m/min) WORK TABLE AND MACHINING AREA • Table dimensions: 1140 x 1640 mm • Maximum table load: 7,500 kg (7.5 tons) • Maximum electrode weight: up to 300 kg (manual operation up to 50 kg, automatic operation up to 25 kg) • Work tank: Automatically lifting/lowering tank structure (Lifting container). • Internal tank dimensions: 1270 x 1770 x 680 mm (max. dielectric level: 640 mm) PULSE GENERATOR (Eagle PowerTec) • Technology: Adaptive current control, resistor-less pulse generator. • Pulse shaping: Adaptive waveform (rectangular pulses, modified rectangular pulses, capacitor pulses). • Working current: PT 60 / PT 110 current module (60 A or 110 A depending on the configuration). CONTROL SYSTEM AND HMI COMPUTER • Control model: PC-NC-Dialog (2 x 32 bit), adaptive Eagle PowerTec control with a 17" LCD monitor • HMI unit: Andronic 2060S industrial computer (Intel Celeron M 1.6 GHz, 80 GB hard drive, Soft PLC CoDeSys, InterBus-S). • Operating system: Microsoft Windows® XP® Professional Embedded. • Communication: USB 2.0 ports and Ethernet network interface. • Advanced functions: Orbital erosion, backlash compensation, automatic measuring cycles. • Remote control: PowerTec Handheld with display. AUXILIARY SYSTEMS AND AUTOMATION • Filtration system: Cartridge filters in the base, area approx. 32 m², capacity 2800 liters of dielectric. • Cooling: Compressor unit with a cooling capacity of 7.9 kW. • Lubrication: Automatic centralized axis lubrication. • Safety: Factory-installed fire extinguishing system (16 kg CO₂ cylinder) with automatic monitoring – enables safe unattended operation. LOGISTICAL AND TRANSPORTATION DATA • Transportation dimensions of the machine body (width x depth x height): 2150 x 3600 x 3360 mm • Transportation weight of the machine body: 12,000 kg (12 tons) • Transportation dimensions of the generator: approx. 1800 x 1600 x 2310 mm • Transportation weight of the generator: approx. 640 - 700 kg • Total set weight: approx. 12,640 kg

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc Lsdpfxezhxi Rs Ai Hsrr max. torque at faceplate 12500 Nm max. turning diameter 1600 mm max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Lodpoyr Tlpefx Ai Horr Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Lodpoyr Tttsfx Ai Hsrr Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: used, Year of construction: 2001, machine/vehicle number: M346, Used MBF Synchrofil LV filling machine 7000 BPHTechnical Specifications & Performance DataThis MBF filling monoblock delivers reliable performance for beverage production within a used bottling line or as a standalone station in industrial packaging environments. Built for hot and cold filling processes, it provides steady output and quality control for second hand bottling operations seeking dependable equipment.Manufacturer: MBFModel code: LV 1200-35 / 240-4VYear of manufacture: 2001Production speed: 7000 bphFiller configuration: 35 valvesFilling technology: Gravity with light vacuum (low vacuum)Capping: alluminio MCA 28x15 mmRotation direction: ClockwiseWorked formats: Compatible with 0.5L and 1.0L bottle formatsDesigned for bottle handling: Cylindrical containersElectrical supply: 380 V, 50 HzCompressed air consumption: 200 Nl/min at 0.6 MPaMachine weight: 4000 kgSafety features: Integrated protections and guardsDocumentation: Manuals and maintenance documentation availableDimension: Width x Height x Depth: 3.40 m x 2.60 m x 2.30 mAdvanced Automation & Control SystemsThe monoblock is engineered for consistent operation and straightforward control within beverage production. Safety circuits, interlocked guards, and emergency stops support safe operation. Format changeovers between 0.5L and 1.0L are supported with dedicated change parts and adjustments suited to gravity/light vacuum filling. The electrical configuration at 380 V and 50 Hz aligns with common industrial standards for packaging machinery, facilitating integration into existing control architectures and line PLC/HMI systems.Production Line Integration CapabilitiesThis filling monoblock integrates seamlessly into a complete used bottling line, upstream of capping and downstream of rinsing or bottle preparation equipment. It can operate as part of a larger bottling equipment layout with conveyors, labelers, and secondary packaging machines, supporting industrial packaging requirements for a wide range of beverage production scenarios.Inline or standalone operationCompatible with standard conveyor systemsFormat flexibility for 0.5L and 1.0L bottlesSuitable for hot and cold filling applicationsMachine Condition & Maintenance HistoryThe machine is currently in production, indicating proven operational status. Manuals and maintenance documentation are available to support installation, operation, and service. Spare parts availability is confirmed, supporting uptime and long-term reliability in second hand bottling operations.Operational Performance & VersatilityThe gravity with light vacuum system provides gentle product handling and stable fill levels, ideal for still beverages and applications benefiting from low vacuum assi... Lsdpfozrgq Dox Ai Horr