Used Gfo Drying Oven 40 Kw for sale (52,676)

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available Lodpfxsu Ng Ncj Akmjhn *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m Lodpsu Nfp Iofx Akmshn further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm accessories: Ledpfsu Iwwzsx Akmjhn -div. outer jaws for lathe chuck i.D. *

Condition: used, Technical details: diameter: 310 mm passage: 90 mm width: 100 mm weight of the machine approx.: 70 kg Lhodpfxou Nll Aj Akmen Power chuck, automatic clamping Features: Equipped with forming jaws Clamping range min./max. 60 / 320mm Flange mounting Ø 295x5mm inside; mounting 3x holes Ø 21mm and pitch circle Ø 230mm *

Condition: used, Year of construction: 2014, Technical details: Lhodpfxsu Nv Tqj Akmen length: 8.000 mm width: 1.600 mm height over floor: 980 mm Payload: 40 t axle distance: 980 track width: 550 mm weight: 9,5 t dimensions L x W x H: 13,3 x 2,5 x 2,65 m - Application for tractors - with corner supports - Trailer drawbar: length 1,300 mm; support height 1,400 mm; crank 600 mm; fastening with adjustment bolt Ø 72 x 90 mm - with solid rubber tires (2x double wheel rocker with 4 wheels) - technically possible driving speed 6 km/h i.D. *

Condition: new, machine/vehicle number: 23GS101972, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Year of manufacture: 2025 Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA Ledpfxerulz Ej Akmjhn Dimensions of cargo space: 163 x 77 x 107 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm Lhsdpfx Akewiq N Iemjn 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: good (used), Year of construction: 2005, For sale: Remak 29.5 kW. In good working order. Lhjdpfxez Sk Hie Akmen

Year of construction: 1998, operating hours: 88 h, condition: excellent (used), For sale: water pump, - BBA B156 TW GMC. Lhodpfjz Skxlox Akmon - Year of manufacture: 1998. - Engine: 11 kW / 1460 rpm. - Operating hours: 88. - Capacity: 180 m3/h. - Condition: excellent/like new.

Condition: good (used), Pumpex water pump, 300 m³/h, 7.5 kW Lhedpfx Akoz Skzaomjn

Condition: excellent (used), For sale: Lenze GST04-2B VCK071-32 gearbox with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. It shows normal signs of wear and tear consistent with use. Its robust construction and high torque make it ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Ledpfsz Sngtsx Akmjhn Technical specifications: Manufacturer: Lenze Gearbox model: GST04-2B VCK071-32 Motor manufacturer: Lenze Motor type: MDEBA1M071-32 Power: 0.37 kW Supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1360 rpm Output speed: 44 rpm Gear ratio: i = 31.6 Output torque: 79 Nm Ingress protection: IP54 Insulation class: F Operating mode: S1

Condition: used, Year of construction: 2019, operating hours: 9,327 h, functionality: fully functional, machine/vehicle number: Roboter: 4600-108236 / Steuerung: 4600-108236, overall weight: 654 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600-40/2.55 Type C manipulator and IRC5 Single controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. The payload is 40 kg with a reach of 2550 mm. It was manufactured in 2019 and has 9327 operating hours. The software version is RobotWare 6.08.00.01. It is equipped with an ABB FlexPendant programming device, a cable set, and the software options Multitasking and HomePosRunning. Lhjdszak E Njpfx Akmjn

Condition: used, mileage: 3,18,000 km, power: 290 kW (394.29 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,750 mm, loading space volume: 84 m³, loading space length: 7,720 mm, loading space width: 2,490 mm, loading space height: 2,200 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Ewers Swing Wall Body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Internal cargo space dimensions: 7,720 x 2,480 x 2,200 mm * 4 rows of load securing systems * 2,500 kg Bär tail lift * Liftable trailing steering axle * Retarder * StreamSpace cab 230/32 * Differential lock * Full air suspension * ABS * Spoiler * Sun visor * Air conditioning * Seat heating * Cruise control * 1 bed * Automatic transmission Ledps Ad Suvofx Akmshn * Euro 6 With tandem swing wall trailer * Manufacturer: Krone * 18,000 kg GVW * Payload 12,350 kg * Ewers swing wall body * Cargo space dimensions: 7,720 x 2,480 x 2,200 mm * 2,500 kg Bär tail lift * BPW axles * Lift axle ---- Special equipment: Front axle load 8.0 t, driver's airbag, work headlights, audio system: CD radio Comfort (Bluetooth), exhaust downwards right, standard and DuoMatic brake connections, compressed air connection in cab, high compressed air unit, air horn, electrics and lighting for swap body frame, cab with air suspension, tinted windscreen, vehicle without trailer coupling, info display 12.7 cm with video function, 3-piece mudguard, 290 L aluminum fuel tank, cool box/refrigerator, alloy rims 9.00x22.5 (ALCOA matt), roof air deflector (adjustable), 2-cylinder air compressor, reinforced engine brake, steered trailing axle, tire pressure monitoring system, retarder, acoustic reversing warning (external buzzer), tail lift switch, reinforced rear cross member, fleet management interface, circuit breaker, cab seats: passenger seat with armrest, cab seats: comfort driver's suspension seat, external sun visor, sunshade roller blind, driver’s door side window, 12V socket in passenger footwell, additional 12V socket, 24V / 25A socket in passenger footwell, 24V socket in right storage compartment, automatic daytime running lights, pre-installation for reversing camera. Further equipment: Euro 6 emissions standard, axle configuration: 6x2, Actros 4, trailer brake dual line, connections left, 24V / 15-pin trailer socket, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel air tanks, assistance system: Attention Assist (fatigue detection sensor), assistance system: Active Brake Assist, assistance system: Lane Keeping Assist, cab width 2.30 m, cab type: L StreamSpace, cab floor with 320 mm engine tunnel, suspension: air/air (full air suspension), electric windows, 100 A alternator, 12-speed gearbox – Type: G 211-12, AdBlue tank: 60 L, rear axle crown wheel 440, chassis/body: base frame, lower comfort sleeper, central locking system, communication interface, radiator grille, regulated power steering pump, engine 10.7 L – 290 kW inline 6-cylinder diesel (OM 470), engine compartment encapsulation, single tires on trailing axle, ramp mirror, residual heat utilization, disc brakes front and rear axle, fabric seat covers/upholstery, cab seats: functional passenger seat, cab seats: folding driver's seatback, voltage converter 24V / 12V 10A, front splash protection, front axle stabilizer, additional rear/trailing axle stabilizer, left external storage compartment, cab 24V socket, tachograph / EU control device, cab door extension, aerodynamically designed underbody cover, front underrun protection, CB radio pre-installation, toll pre-wiring, cranked front axle, regulated water pump, permissible total...

Condition: excellent (used), The geared motors are fully functional, tested, and ready for use. Their technical condition is very good, with only normal signs of wear and tear resulting from operation. Condition of individual units: 1 unit has a small dent in the fan cover (visible in the photos). 1 unit has a minor seal damage (crankshaft seal) – visible in the photo. The price applies to 1 unit. Technical data: Manufacturer: SEW-EURODRIVE Motor type: DT80K4/BH6/HR/TF Power: 0.55 kW Motor speed: 1360 rpm Output speed: 54 rpm Three-phase motor Electromagnetic brake Protection class: IP54 Ledpfxoz Snmgs Akmshn Insulation class: F Country of manufacture: Austria The scope of sale includes exactly what is shown in the photos. The geared motors are ideally suited for driving conveyors, feeders, production machines, packaging machines, and other industrial equipment. The price stated in the advertisement applies to one unit.

Condition: excellent (used), For sale: SEW-EURODRIVE RF17 DT63L4/B03 geared motor with a three-phase motor with a power of 0.25 kW and a built-in electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of use resulting from operation are visible. The scope of sale includes exactly what is shown in the pictures. Technical data: Manufacturer: SEW-EURODRIVE Model: RF17 DT63L4/B03 Power: 0.25 kW Supply: 3× 230 V Δ / 400 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 94 rpm Torque: 25 Nm Gear ratio: i = 13.84 : 1 Brake: 230 V AC, 3.2 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Design: IM B5 Weight: 10.84 kg Ledjz Snmtjpfx Akmshn Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE WA20 DR63L4 geared motor with a three-phase electric motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear and tear resulting from use are visible. Thanks to its robust construction, the geared motor is ideal for driving conveyors, feeders, production machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: WA20 Motor type: DR63L4 Power: 0.25 kW Lhjdpfxsz Snm Hs Akmon Power supply: 3×220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 27 rpm Gear ratio: i = 48.00 Output torque: 45 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Weight: 8.8 kg

Condition: excellent (used), For sale: Mannesmann Demag S040-B5-21-3 geared motor with a three-phase UMF71BX-6-Z motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good, with normal signs of wear and tear from use. The robust gearbox and reliable motor make this geared motor ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Lsdpfx Akoz Snn Homohn Technical specifications: Manufacturer: Mannesmann Demag Gearbox type: S040-B5-21-3/ Motor type: UMF71BX-6-Z Motor power: 0.25 kW Power supply: 3× 220/380 V, 50 Hz Motor speed: 890 rpm Output speed: approx. 64 rpm Gear ratio: i = 14 Current: 1.56 / 0.90 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Lubrication: synthetic oil Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DR63M6/BR/TH geared motor with a three-phase motor and a 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of use and minor scratches on the housing. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply voltage: 3×230/400 V Δ/Y Frequency: 50 Hz Current: 1.00 / 0.57 A Motor speed: 900 rpm Output speed: 15 rpm Ledoz Snplepfx Akmehn Torque: 32 Nm Gear ratio: i = 60.00 Ingress protection: IP54 Insulation class: F Brake: 24 V DC Weight: 9.46 kg

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Ljdpfx Asz Snpvskmjhn Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: excellent (used), For sale: SEW-EURODRIVE S30DT71K-2B geared motor with a three-phase electric motor and an integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of wear and tear resulting from use are visible. This geared motor is perfectly suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Manufacturer: SEW-EURODRIVE Type: S30DT71K-2B Motor power: 0.25 kW Lsdpfx Akjz Snk Eemshn Motor speed: 2700 rpm Output speed: 185 rpm Output torque: 10 Nm Power supply: 220 V Δ / 380 V Y Frequency: 50 Hz Rated current: 1.7 / 0.98 A Power factor: cos φ 0.85 Protection class: IP44 Insulation class: B Brake: 220 V Brake torque: 2.5 Nm Design: B6AB Lubricant: Mobil Glygoyle 30 Country of origin: Germany

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Lhsdpo Adz Hbsfx Akmjn TECHNICAL DETAILS Tool holder: SK40 MACHINE DETAILS Dimensions, length: 1,200 mm Dimensions, width: 800 mm Dimensions, height: 400 mm Weight: 150 kg EQUIPMENT SK40 tool holders.

Condition: excellent (used), Weishaupt WM-L20/1a. 1400 kW. 118 kg/h. Year of manufacture: 2008. Ledeig Tw Njpfx Akmehn

Condition: excellent (used), Gas burner Weishaupt G40/1B-2A 6 units available Ljdpfx Asi Dw E Eekmohn Output: 2100-3450 kW In stock or used, from companies that have ceased operations but were in service until the very end. Please arrange a viewing by telephone only! We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Of course, we will also handle all formalities. Loading and shipping are possible.

Condition: excellent (used), CATALOGUE NUMBER 8064 TECHNICAL DATA - max. diameter of the main saw blade with scoring blade: 350mm - max. cutting height: 130mm - main blade adjustable up/down + angle, manually - spindle diameter: 30mm - with crosscut fence - cutting length on the fence: 3200mm Lhodpfx Aozrwbtekmsn - cutting width adjustable electrically with guide: 1320mm - with side table - with scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 20mm - main motor: 7.5kW - 3 types of spindle speeds: 3000/4000/5000 rpm - diameter of the dust extraction port: 120mm - dimensions of the table with extension and widening: 1870x1440mm - blade guard - dimensions (L/W/H): 4100x3400x1500mm - weight: 860kg ADVANTAGES – Made in Italy – Cutting width adjustable electrically – With scoring blade – Unpainted – DTR documentation, CE certified – Used saw, very good condition Net price: 26900 PLN Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Ledpfxjvctlgo Akmshn Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24