Used Gmp Laminator for sale (987)

Condition: ready for operation (used), Year of construction: 2022, Features: • Lamination with BOPP, PET films, etc. • Electronic control of temperature and speed • Anti-curl system for material • Automatic sheet separation • High stability in continuous production • Hot Knife Technical data: Model: TLMG 50 REB 100 / 1400 Year of manufacture: 2022 Maximum sheet size: approx. 1000 × 1400 mm Minimum sheet size: approx. 300 × 300 mm Maximum speed: up to 7,500 sheets/h Heating system: Thermal oil calender Lamination type: WET / DRY Feeding: Automatic Tension system: Automatic Dedey I A Dhopfx Agmjuw

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Dusdpfevy Aipex Agmjw Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: used, functionality: fully functional, With this offer, you are purchasing a used automatic laminator ‘Lami Revo-T14’. Item for sale: 1 x Lami Revo-T14 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Duedoxb A N Uepfx Agmsw Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Dsdpfxegyzzus Agmsuw Paper weight . 115-350g/sqm.

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Dsdpfxsx Eb Abs Agmjuw Leo Holland

Condition: used, Year of construction: 2004, Back Coating Line Laminating Machine FRIZ, type Profi FBS 130, year 2004 Dodpfx Aeyay Ruegmouw

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) Dusdpfeyt Iprsx Agmsw · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller · Heaters, level switches, and power contactors have been replaced. · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet.

Condition: ready for operation (used), Year of construction: 2011, Connected load: 36kW, length: 2750mm, width: 2750mm, height: 2000mm, weight: 2.5t, with documentation, operating hours: 20h, an on-site inspection is possible. Dedpfxsqi D Tgj Agmsuw

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Djdji E Trpspfx Agmeuw

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Dusdpfoq Ixglex Agmew

Condition: used, Year of construction: 2019, Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Primary Unwinder Max roll Ø: 1000 mm | Core: 76 / 152 mm | Max weight: 1000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Secondary Unwinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Hydraulic loading, BST OPG web guide, photocell edge detection Rewinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Web width: 1330 mm | Max lamination width: 1315 mm Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Adhesive Systems Single-component Monodispenser (VEA) for paper laminations Two-component solventless PU dispenser Heating belts for 200 kg adhesive drums Materials: ALU 6.35–50 μm | LDPE/LLDPE 30–200 μm | OPA 12–50 μm | PET 10–30 μm | Paper 40–200 gsm | BOPP 12–80 μm Dusdpfx Asyiu I Tegmsw Controls & Accessories PLC Siemens Simatic DP IM 151-8F PN/DP CPU ET200S Semi-automatic roll trolley 1000 kg

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 Dsdopaiaiopfx Agmeuw POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: used, machine/vehicle number: Mod 802 EI 48, Transformer lamination stacking machine EI 48 Dsdpoyl Ad Uefx Agmeuw

Condition: excellent (used), 5 pieces, A-rack, support per side: 390 mm External dimensions: Duodpfx Agsxat Ulomew Width: 2420 mm Depth: 1360 mm Height: 2530 mm

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Duedpox I Rprofx Agmjw

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Djdpowzx Tfefx Agmjuw

Year of construction: 1985, operating hours: 25,000 h, condition: used, functionality: fully functional, machine/vehicle number: -, Fully operational flame lamination machine, in daily use on one or two shifts until December 2019, and regularly upgraded for electrical, mechanical, and methane gas systems. This is an Italian construction machine from the early 1980s. The machine dimensions are 4 meters by 11 meters. It can handle rolls up to 1.80 meters in height. Lamination thickness ranges from 2 mm to 35 mm. Both cylinder speeds, burner position, and flame intensity are adjustable. We typically laminate EPE or PU foams together or with fabrics, synthetic leather, or cotton fabric. Dusdpfx Agjwyxpkjmsw

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing force from below: Number of press chambers: 2 Dedpfx Agehtd E Asmeuw Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Pressing system: hydraulic Permanent pressure control: included Packaging: separate Loading/unloading: in the longitudinal direction

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Dsdpfxexdm E Ee Agmjuw

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a fully procured, modular GMP process system for the production of C1-Esterase Inhibitor (C1-INH) from human plasma. The plant was professionally engineered, procured, and has successfully completed FAT, but has never been installed or put into operation. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: brand new, in original packaging Operating hours: 0 Storage: temperature-controlled warehouse SCOPE OF SUPPLY (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): - 2 adsorption lines (DEAE / QAE) - 2 buffer tanks - 2 pigging systems - 2 cooled transfer lines (pipe-in-pipe) - 4 filter press racks - 4 cooling cascades - 4 CIP loops Precipitation PRE: - 3 pre-precipitation tanks (incl. 1,000 L) - 3 main precipitation tanks - 3 CIP stations - 3 multi-layer filters - 1 vacuum station Buffer Preparation (Bay 2 & 3): - 6 buffer vessels (NaCl, DEAE, QAE buffer) - 6 temperature control skids - 4 media/WFI/CIP distribution units LEP 2.3 – Washing & Elution Solutions: - 2 washing solution tanks (up to 9,000 L) - 2 elution solution tanks - 4 temperature control units LEP 13 – Ammonium Sulfate System: - 1 preparation tank (3,500 L) - 2 storage/distribution tanks - Solid material crusher - Dosing & neutralization system - Heat-traced pipes Media Distribution: - 1 pharmaceutical NaOH 1M system - 1 technical NaOH 32% system - 1 acetic acid 60% system - Pump and dosing stations Additional Process Tanks: - >15 stainless steel tanks 316L (1,000–9,000 L) - Various skids, distribution and instrumentation units Djdpfx Agoym Ayfsmeuw GMP & DOCUMENTATION - URS / requirement specifications per LEP - P&ID diagrams - Layout and sectional drawings - EMSR & instrumentation documentation - FAT documentation - Complete weld certification (digital) - Extensive photo documentation The project documentation is fully available both digitally and additionally physically archived, structured in 316 folders. Process control system connection with pre-configured MES interface is foreseen. Cleanroom integration according to specification. SALE Preferably as a complete system. Modular sale possible if the entire package is not sold. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or new site establishment projects. Availability: short notice Inspection: by appointment Price: on request

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, Oscillating stainless steel granulator with enclosed product feed and manual dosing unit. The mill is mounted on a stainless steel frame with feet. Various sizes of sieve inserts are included with the system. The installation is fully documented with all details, including parts lists, operating manual, drawings, etc. Electrical connection: 380 V, 50 Hz, 2.5 Amp. The MG-800 has been qualified in accordance with GMP guidelines and is fully documented. Packaging, loading, and load securing on a truck are included in the sale price. Dsdpfx Agevt Sywemjuw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Dujdpfx Asyxyzregmjw

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, BRINOX LEP13.2 – AS Storage Tempering Unit – GMP – Year of Manufacture 2020 – Like New Manufacturer: BRINOX Process Systems LEP13.2 KK6772 Package 12 System type: LEP13.2 – AS Storage Tempering Unit Project: Ammonium sulphate system Year of manufacture: 2020 Serial number: 1003624 Tag number: MR-ASF-ASF61-KK6772 Location: Germany DESCRIPTION For sale is a nearly new LEP13.2 tempering unit in pharmaceutical GMP-compliant design, manufactured by BRINOX Process Systems. The unit is constructed as a compact, pre-assembled skid unit and was designed for use in an ammonium sulphate storage system. Complete project and FAT documentation is available. TECHNICAL DATA Dusdpfx Aoyl Na Njgmsw Type: LEP13.2 – AS Storage Tempering Unit Medium: Ammonium sulphate Design: Pharma / GMP Materials: Stainless steel 1.4435 / 1.4301 Control air pressure: 6 bar Pressure and leak testing performed FAT successfully completed MAIN COMPONENTS 2x KSB Movitec centrifugal pumps Alfa Laval plate heat exchanger Electric instantaneous water heater Reflex expansion vessel Samson control valve GEMÜ ball valves (manual & pneumatic) Labom pressure gauges Comprehensive sensors & measuring instruments Insulated pipework Stainless steel skid frame construction APPLICATIONS Temperature control of process media Use in GMP-regulated production areas Pharmaceutical and biotechnology plants Media circuits with temperature control CONSTRUCTION Compact, closed skid unit Fully piped Professionally insulated piping High-quality industrial components Service-friendly layout Completely dismountable and transportable CONDITION Condition: New, original packaging Year of manufacture: 2020 Project-specific unit Hardly any operating hours Visually and technically in excellent condition DOCUMENTATION FAT documentation Pressure test certificates P&ID diagrams Layout drawings Factory certificates according to EN10204 Materials lists EU declarations of conformity FEATURES Complete GMP documentation High-quality brand components Ideal for pharmaceutical and biotech applications Immediately available Significantly below new price

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems LEP13.2 KK6771 Package 11 System type: Temperature Control Unit – LEP13.2 AS Storage Project: Ammonium Sulfate Supply and Disposal Unit: KK6771 Year of manufacture: 2020 Serial number: 1003622 Equipment number: 20022749 LEP13.2 – AS Storage Temperature Control Unit TECHNICAL DATA Product: LEP13.2 – AS Storage Temperature Control Unit Medium: Ammonium sulfate Design: Pharmaceutical / GMP Dujdpfx Ajyl I S Degmow Product-contact materials: 1.4435 / 1.4301 stainless steel Dimensions (L x W x H): approx. 1900 x 1545 x 1580 mm Control air supply: 6 bar (AIP) Tested pressure range: up to approx. 3–4 bar (Leak test documented) MAIN COMPONENTS 2x centrifugal pumps Horizontal shell-and-tube heat exchanger Electric flow heater Expansion vessel Pressure and temperature measurement points Pneumatic control valves Manual ball valves (GEMÜ) Stainless steel control cabinet / terminal box Fully insulated piping APPLICATION The temperature control unit is used for precise temperature regulation in the ammonium sulfate storage system of a pharmaceutical production facility. Suitable for: - Pharmaceutical production environments - GMP-regulated systems - Media temperature control systems - Turn-over package integration DESIGN / CONSTRUCTION - Complete, pre-assembled skid unit - Stainless steel frame construction - Compact design with unobstructed maintenance access - Fully piped and insulated - Clear labeling of all measuring points and fittings - Pharmaceutical-grade execution as per CSL Behring customer specification - P&ID checked - Layout checked - Multiple documented leak tests - Calibrated measuring devices with certificates The system is fully assembled and prepared for seamless integration into existing pharmaceutical installations. CONDITION - As-new / Project system - Year of manufacture: 2020 - FAT completed - Pressure test passed - Complete documentation available COMPREHENSIVE DOCUMENTATION Includes, among others: - Factory certificates according to EN 10204 - Material lists - EU declarations - Inspection reports - Documentation of installed equipment - I&C documentation - As-built isometrics - User manual - Calibration certificates SPECIAL FEATURES - Project-specific pharmaceutical design - GMP-compliant manufacturing - Complete skid-mounted construction - Compact footprint (approx. 1.9 x 1.5 m) - Maintenance-friendly layout - High-quality piping insulation - Ideal for technical areas close to cleanrooms

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Product: LEP13.1 – AS-Batch Temperature Control Unit System type: Temperature control unit for ammonium sulfate batch system Year of manufacture: 2020 Serial number: 1003620 Tag number: MR-ASF-ASF61-KK6770 Equipment number: 20022748 Media Connections / Process Data WCOV – Chilled water supply: 6 °C WCOR – Chilled water return: 12 °C WSV – Process/municipal water AIP10 – Control compressed air 6 bar Design as a closed temperature control module with integrated pump and heat exchanger technology. Dimensions Overall dimensions as per layout: approx. 1920 x 1435 x 1573 mm (L x W x H) Compact, skid-mounted unit with welded stainless steel frame. Construction Dedpfx Aeyl Izxjgmouw Frame construction in stainless steel Fully insulated piping (industrial insulation) Stainless steel shell-and-tube heat exchanger Electrical inline water heater WT1011 Pump PU1021 Pump PU9203 Heat exchanger WT1001 Expansion vessel BH9701 Fittings: GEMÜ shut-off valves Pneumatically actuated valves Manual ball valves Pressure gauges Sensors and instrumentation as per P&ID Complete piping and component labeling provided. Condition New and in original packaging. Not yet put into operation in production. Factory new condition. Supplied directly by the manufacturer Brinox. FAT / Test Status FAT carried out. Leak test: Test medium: Compressed air Test pressure: approx. 3 bar Holding time: 1 hour Result: Passed Calibration: Pressure gauge calibrated Measuring range: 0–10 bar Calibration certificate available Traceable to national standards Documentation Turn-Over-Package complete Included documents: FAT plan FAT report Non-conformance form Layout drawing check Maintenance and calibration accessibility check P&ID review Leak test report Calibration certificates Documentation check Factory certificate 2.1 according to EN 10204 LBM material list incl. EU declarations List of installed components – equipment List of installed components – instrumentation points (PLT) Material parts list for as-built isometry Key Features GMP-compliant construction Pharma/biotech project quality Full traceability Compact plug-and-play skid design Completely piped, insulated, and ready to connect Immediately available