Used Hohner Universal 48/5 S for sale (99,258)

Condition: excellent (used), fuel type: diesel, first registration: 02/1997, Year of construction: 1997, HATZ DIESEL 2L40CH Tank 1200 liters = Further information = Intended use: Construction Gross vehicle weight (GVW): 3,800 kg Hnsdpsydfa Aefx Achsr Technical condition: very good Visual condition: very good Serial number: 12057 Please contact Thierry Leemans for further information.

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Hedoy H Hmwepfx Achsnr Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2013, operating hours: 16,885 h, functionality: fully functional, mileage: 1,27,833 km, power: 118 kW (160.44 HP), first registration: 06/2013, overall weight: 11,150 kg, fuel type: diesel, color: orange, axle configuration: 4x2, empty load weight: 6,350 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, suspension: steel, loading space volume: 5 m³, Equipment: ABS, additional headlights, air conditioning, low noise, Self-propelled street cleaning machine: + Ravo + Type 580 + First registration: 10.06.2013 + FPT 4-cylinder diesel engine, 160 HP, 3920 cc + 127,835 km; 16,885 total operating hours; 9,687 sweeping hours + Euro 5 + Hydrostatic drive – max speed 50 km/h + 2-brush system + Fresh water tank + Debris container hydraulically tiltable to the rear + Central lubrication system + Rear-view, side-view, and brush cameras + Amber beacon + Radio/CD + Air conditioning + 450 cm x 190 cm x 270 cm (LxWxH) + Empty weight: 6,350 kg; gross weight permitted: 11,150 kg + Municipal vehicle from first owner Hjdpfx Acjyk Hh Uehenr Get all newly listed vehicles sent by email – subscribe to our NEWSLETTER! Errors and typographical mistakes possible, subject to prior sale!

Condition: used, mileage: 69,000 km, power: 62 kW (84.30 HP), first registration: 09/2014, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Please, no emails / no emails. Due to time constraints, we are unable to respond to them. Thank you for your understanding! VAT can be shown separately. Net selling price: €6,715.00 ---- Opening hours and further information: We have Volkswagen T5 Transporter 1.9 TDI + 2.0 TDI models in stock. Hsdpfx Acewwga Eshsnr Inspection and purchase possible without prior appointment: Inspection and purchase possible without prior appointment: No appointment necessary! We have Volkswagen T5 Transporter 1.9 TDI models in stock. Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Please, no emails / no emails. Due to time constraints, we are unable to respond to them. Thank you for your understanding! If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. More offers under: ----more offers in stock: VAT can be shown separately. ---- !!! Large selection !!! !!! Constant change of Volkswagen T5 Transporters !!! VAT can be shown separately. ----more T5 Transporters in stock Prices: DEPENDING ON CONDITION Price depends on: - Mileage - First registration - Optical condition - Technical condition - TÜV due - TÜV / MOT NEW - Service due - Service NEW - 1-seater - 2-seater - 3-seater ----VAT can be shown separately VAT can be shown separately ---- - 2 sliding doors, left + right - 1-seater / 2-seater / 3-seater (Retrofitting of passenger seat possible without problems) - Serviced according to service schedule - Regularly maintained at an authorized workshop - Electric mirrors - Parking assist / PDC - Electrically heated mirrors - Airbag - Remote/Central locking - ESP/ASR/ABS - Hill start assist - Electric windows - Height-adjustable steering column - Height-adjustable seats - Tinted windows - Partition with window - Sliding door, right, with window - Export > No problem - Forklift loading possible - Net - Export > No problem If you have any questions: Christian Hirsch: If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. More offers under: ---- More offers under / More offers under / Equipment was determined using a VIN query; errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Errors and prior sale are reserved. ---- More offers under / More offers under / Equipment was determined using a VIN query; errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics.

Condition: used, wire electrode, welding wire, welding wire Hnodoff Aq Ispfx Achjr -Welding wire: Avesta 904L -EN: 12072 AWS A5.9/SFA 5.9 ER385 -O: 1.00 mm -Dimension: O 300/100 mm -Weight reel: 8.9 kg

Condition: good (used), Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 Hjdpfen Hbb Ajx Achjnr -Voltage: 230/115V -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

Year of construction: 2015, condition: good (used), Fan, fan, electric motor, blower, axial fan, duct fan Hnedpfxsgx Am Ss Achsr -Manufacturer: FläktWoods, axial fan type 31JM / 16/4/5/36 S / S 3 S BT4 -Motor: 380-420 V / 1370 rpm / 100 W. -Ventilation duct: Ø 315 mm -Hole circle: Ø 355 x 10 mm -Protection class: IP55 -Number: 1x fans available -Price per piece -Dimension: Ø 395 x 360 mm -Weight: 15 kg / pc.

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band Hsdpfx Aod Ngp Iochonr -Condition: unused -Price: per piece -Number: 5x sheets available -Toothing: 5-8 -Dimensions: 4500 x 34 x 1.10 mm -Weight: 1.3 kg/piece

Condition: excellent (used), Year of construction: 2002, 5-axis CNC machining center 2002 Control system: Heidenhain iTNC 530 Technical data: x-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Hjdjwn A Slspfx Achjnr Tool holder: SK 40 (ISO 7388IIB) Swiveling: B: 103° Work table: Table clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotating: C: 360° Max. table load: approx. 500 kg T-slots: 11 x 14 mm x 63 mm Tool magazine: Number of tool positions: 32 (2 x 16) Tool holder: SK 40 (ISO 7388IIB) Max. tool diameter: 80 / 130 mm Max. tool diameter with free adjacent compartment: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Condition: used, mileage: 1,59,500 km, power: 340 kW (462.27 HP), first registration: 08/2008, fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, color: blue, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, total height: 3,780 mm, Year of construction: 2008, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Information in English: GINAF X 4241 S, manual transmission, 8x4, 159,500 km, in top condition, Dutch truck Superstructure: 30-ton VDL hook lift system, system length 660 cm Date of first registration: TÜV (technical inspection): 09/2026 Chassis number: XL9AD21MX050124 Mileage: 159,500 km, 100% original and verifiable Engine power: 340 kW (460 hp) Transmission: Manual, 16-speed ZF transmission External dimensions: 900 x 250 cm Unladen weight: 14,370 kg Payload: 35,630 kg Permissible total weight: 44,000 kg GCW (Gross Combination Weight): 50,000 kg Color: Blue Suspension: Parabolic front, hydraulic rear Steering axles: Yes, axle 1, axle 2 and axle 4 Driven axles: Axle 3 and axle 4 are driven Emission class: EURO 5 Axle configuration: 6x2 Tire Axle 1: 385/65 R22.5 L50% R50% Tire Axle 2: 315/80 R22.5 L50% R50% Tire Axle 3: 385/65 R22.5 L30% R30% Tire Axle 4: 315/80 R22.5 L30% R30% Cab type: Day cab Extras: Original Dutch truck from first owner, mileage of only 159,500 km is 100% original and verifiable, axles 1, 2 and 4 are steerable, axles 3 and 4 are driven, axles 3 and 4 are hydraulically suspended, manual 16-speed transmission, ZF air conditioning, 30-ton VDL hook lift system, claw coupling with light and air connections, front and rear camera, central lubrication system, etc. UNIQUE DUTCH GINAF 8X4 WITH 3 STEERING AXLES Original mileage: 159,500 km Further information: * Payload: 29,630 kg * Type | First axle: Goodyear R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inside left | First axle: 60% * Tire tread depth inside right | First axle: 60% * Maximum axle load | First axle: 9,000 kg * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Type | Fourth axle: Goodyear R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 315/80 R22.5 * Tire size | Fourth axle: 315/80 R22.5 * Tire tread depth outside left | Third axle: 60% * Tire tread depth outside left | Fourth axle: 60% * Tire tread depth inside left | Second axle: 60% * Tire tread depth inside left | Third axle: 60% * Tire tread depth inside left | Fourth axle: 60% * Tire tread depth outside right | Third axle: 60% * Tire tread depth outside right | Fourth axle: 60% * Tire tread depth inside right | Second axle: 60% * Tire tread depth inside right | Third axle: 60% * Tire tread depth inside right | Fourth axle: 60% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 11,500 kg Hedpszm D Uvofx Achonr * Maximum axle load | Fourth axle: 11,500 kg * Wheelbase: 640 cm * Price on request: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Steering | First axle: Yes * Position | Second axle: Front * Position | Third axle: Rear * Position | Fourth axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brand | Fourth axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Drum brakes * Brake type | Fourth axle: Drum brakes * Suspension | Second axle: Parabolic springs * Suspension | Third axle: Hydraulic suspension * Suspension | Fourth axle: Hydraulic suspension * Reduction | Third axle: Hub reduction * Reduction | Fourth axle: Hub reduction * Twin tires | Third axle: Yes * Twin tires | Fourth axle: Yes * Driven | Third axle: Yes * Driven | Fourth axle: Yes

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Hnedpfxszf Hi Hj Achjr Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), Year of construction: 2013, Traverses X Y Z; 500 x 450 x 400mm, table size 630 x 500mm, Hjdpfszicmpsx Achonr table load 200 kgs, B axis -5/+110 degrees, C axis 360 (0.001 degrees), spindle speed 12,000rpm, spindle taper Iso 40, 30 station ATC, Siemens 840D control, swarf conveyor.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Hjdpfx Aszc D Aaechjnr Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2005, Mitsubishi Diamond 3000 S -5 is a printing machine manufactured by Mitsubishi in 2005, with a format of 720 x 1020 mm and a print count of 300 million. Currently in production in Turkey, it features IPC II Intelligent Press Control, high-speed separators, a refrigeration and recirculation system, Grafix Digitronic powder device, SAPC semi-automatic plate changers, non-stop feeders, cylinder washing device, automatic plate cylinder cocking, automatic blanket washing device, and Mitsubishi Delta dampening system. The delivery terms are FCA. Format: 720 x 1020 mm Equipment: Plate Cylinder Cocking blanket wash up device: autom. Hodpfx Ajvfxnxjchenr SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Condition: excellent (used), Year of construction: 2015, operating hours: 50,976 h, functionality: fully functional, nominal power (apparent): 57 kVA, overall weight: 9,850 kg, spindle speed (max.): 18,000 rpm, input voltage: 400 V, For Sale: DMG MORI DMU 60 eVo CNC 5-Axis Universal Machining Center — 2015 Hjdpfsy Rd Rnox Achonr German-made DMG MORI DMU 60 eVo CNC 5-axis universal machining center, suitable for high-precision and complex milling operations. The machine offers excellent rigidity, precision, and productivity for mold manufacturing, precision engineering, automotive, aerospace, and general machining applications. Main Specifications: Manufacturer: DMG MORI / DECKEL MAHO Seebach GmbH Model: DMU 60 eVo Year: 2015 Origin: Germany Spindle Speed: 18,000 rpm Weight: 9,850 kg Power: 57 kVA Voltage: 400 V / 50 Hz CE Certified Available for inspection. Photos, videos, and further technical details can be shared upon request.

Condition: used, mileage: 4,99,574 km, power: 315 kW (428.28 HP), first registration: 04/2013, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro5, color: other, brakes: retarder, Year of construction: 2013, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Front refrigerator - Toilet - Webasto Other - DVD player - Air conditioning = Additional Information = Hedsy Avpyopfx Achjnr Height: 370 cm Damage: none = Company Information = We are an international company based in Belgium, near Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, and models in stock, covering every price range. We can find the right tourist, school, or public transport bus for you, tailored to your needs or budget. All information is provided without guarantee. Errors, prior sale, and typographical errors are subject to change. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: ready for operation (used), Groschopp WK 1735309 gearbox motor with brake, serial no. 9019059, with gearbox VE 31-K-R-31, gear ratio i = 5, mounting hole spacing: 46 x 46 mm, drive shaft diameter: 10 mm, used, minimal signs of wear, 100% functional, scope of supply as shown in the photos. Hnjdpfx Aei D H U Tjchor

Condition: ready for operation (used), Hydac OLF-5/4-S-370-N-N5AM002-C filter system SN: MK116904 with FCPA171B-4 / 6018870 motor, Hydac VM 2 C.0 pressure switch and FZP-1/3.1/P/71 cooler, used, minor signs of wear, 100% functional, scope of delivery as per photos Hodpfx Aony Dngochjnr

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 Hodpfxjytcf Us Achenr spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, Hodezhuitopfx Achjnr FMB programming software, Pneumatic material stop, Measuring / probing device.

Condition: new, sheet width 3100 mm plate thickness 6 mm pre-bending 5 mm Hnsdpfx Aoyv Nf Iechor upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Hnedpfx Acszavqwehjr Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2017, Main spindle changed 2025. Technical details shown on photo. Hsdpfey S U Tcex Achenr Parts shown by hand not come.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: SIEMENS, controller model: 840D, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Year: 2018, CE compliant CNC: SIEMENS 840D with SHOP MILL 4+1 axes ONLY 18,300 power-on hours Worktable dimensions: 2-piece table - fixed 920x540 mm / rotary-tilting 650x500 mm (with extension ring) Longitudinal X-axis travel: 1520 mm Transversal Y-axis travel: 520 mm Vertical Z-axis travel: 420 mm Spindle taper type: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Approximate net weight: 10,000 kg Accessories: Hedpfx Asy Azclschenr Internal coolant Chip conveyor Full upper enclosure Pneumatic door opening BLUM tool presetting and workpiece probe capability

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, warranty duration: 12 months, total height: 940 mm, total length: 660 mm, total width: 800 mm, type of input current: three-phase, overall weight: 35 kg, input current: 16 A, control voltage: 24 V, NEW ++ NEW Deep Fat Fryer NEW ++ NEW TOP model: F 48 Floor Model Stainless steel design 2 immersion grids with drip tray in the steam lid Fat pan heating manually adjustable up to 200°C with safety thermostat Capacity approx. 480 donuts/hour Dimensions: 800 x 660 x 940 mm (W x D x H) Hsdpfsvacdgjx Achsnr Tested only by us in accordance with DGUV V3 Connection 400V, 16A-CEE plug New device with warranty + spare parts service Options: Leasing & rental service Immersion grid Delivery service Maintenance contract Spare parts box Service package We have a large selection of deep fat fryers in stock!