Used Homag Servo 4-Axis for sale (65,599)

Condition: good (used), Aggregate carrier, clamping plate, traversing table, for modular aggregate system, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG aggregate carrier for milling units -with heavy leadership -movable laterally -with counter Rodeb R Ua Hepfx Afhecd -Table height: 285 mm -Table surface: 1210 x 295 mm -Table thickness: 18 mm -Dimensions: 480/1210/H290 mm -Weight: 172 kg

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter Rcodpeb Uhn Sefx Afhod -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg Rodpfjb Uhpfex Afhscd

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm Rsdpfob A Nmpjx Afhjcd -Number: 1x motor available -Weight: 10 kg

Condition: good (used), CAN axis motor, positioning motor, linear drive, servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Homag, CAN axle motor -Type: PSE 411 C -Voltage: 24 V Rcedpjxx Slgefx Afhed -Power: 30 watts -Speed: 90 rpm -Hollow shaft: Ø 14 x 20 mm -Dimensions: 155/55/H70 mm -Weight: 1.1 kg

Condition: good (used), Tax cards -Replacement cards for: Rcodpfxob A Nf Ts Afhjd -Homag Type: KFL 53 -Homag Type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards -Cabinet: only sold as a complete unit -Weight: 200 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 15 mm L 25 mm Rcodpfx Afjb A Nxyjhsd -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Rodpfob A Nx Dex Afhjcd -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Condition: good (used), Aggregate carrier, clamping plate, traversing table, for modular aggregate system, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG aggregate carrier for milling units -with heavy leadership -movable laterally -with counter -Table height: 342 mm Rodpfsb Sab Ejx Afhecd -Table surface: 1715 x 225 mm -Table thickness: 115 mm -Dimensions: 1715/370/H342 mm -Weight: 238 kg

Condition: used, Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 Rcodpsgy T Nxjfx Afhsd -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

Condition: used, Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz Rcsdpfx Aferp Ikvehsd -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm - Tool magazine: 14 positions Redpjw Dv Hzefx Afhecd - Drills: 9x vertical, 2+2 horizontal - Chip conveyor - WoodWOP 6.1

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm Rcjdoza Uryepfx Afhjd - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical - LED display of the vacuum pump position - Tool magazine: 12 slots

Condition: excellent (used), Year of construction: 2007, Used CNC machining center Manufacturer: Homag Type: BOF 311/40/F/K Year of manufacture: 2007 Special features: 5-axis spindle with 15 kW "Drive 5+" (incl. vibration sensor) Workpiece thickness 300 mm incl. clamping device WoodWop 8.0 incl. Windows 7 computer Rodpfszdydzex Afhscd 5-axis CNC cross-support machine; Cantilever table with 8 adjustable consoles, each with 2 suction cups, side and longitudinal stop bolts, LED position display for vacuum suction cups 6 sets of extraction rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units individually 4000 mm, pendulum max. 1550 (1375) mm Workpiece diameter 25 mm: individually 3475 mm, pendulum max. 1915 mm -Workpiece width: stop at the front: 1450 mm for all units / 1525 mm with workpiece diameter 25 mm Stop at the rear: up to 1600 mm / 1730 mm – Workpiece thickness: – Max. 300 mm including clamping device – Up to max. 60 mm with standard clamping device SAFETY AND PROTECTION DEVICES: EC compliant; SAFETY GUARD ON THE RIGHT WITH DOOR Left and rear: wall installation! Support equipment: 15 kW Drive5+ spindle and 30-position tool changer (chain) up to 24,000 rpm, vibration sensor Pick-up location for saw blade 350mm diameter Drilling head with 25 spindles (V19/H6/S0/90°) AGGREGATE INTERFACE DRIVE5+ Chip conveyor belt TOOL TRANSFER LOCATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 140 M3/H Control system: POWERCONTROL PC85 with PLC CONTROL SYSTEM; WoodWop Version 8.0 WOODWOP-CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL SYSTEM TEXTS: GERMAN Delivery includes only the tools and HSK tool holders shown in the pictures!

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. Redpfezdignox Afhocd • Cutting width (programmable pusher): approx. 4,250 mm • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,800 kg, Edgebander manufactured in 2017. This HOMAG Optimat KDF 440 C features a workpiece thickness capacity of 8 - 60 mm and edge material compatibility of 0.4 - 8 mm. It offers a variable feed speed of 8 - 18 m/min and includes several units for joint trimming, glue application, and corner rounding. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KDF 440 C machine we have for sale. Contact us for further details. Redjzdidaopfx Afhjcd • Condition: Used • Workpiece thickness: 8–60 mm • Edge material: 0.4–8 mm (depending on unit configuration) • Feed speed: 8–18 m/min (variable) • Min. workpiece length: approx. 120 mm • Min. workpiece width: approx. 60 mm • Glue application: EVA hot-melt adhesive; PUR-compatible (optional) • Glue pot: Teflon-coated; quick-change capability • Total connected load: approx. 15–20 kW (depending on configuration) • Compressed air requirement: 6–7 bar • Control system: powerControl / powerTouch • CE marking: Yes • Unit configuration: • Joint trimming unit • Glue application unit • Pressure zone • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Scraper unit • Buffing unit

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Rcjdpfoy Exwfex Afhjd Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment Rsdpfszina Ijx Afhjcd - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Rcodpsy Ur Hlefx Afhsd Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis HOMAG WEEKE BHP200/VANTAGE714 CNC Machining Centre was manufactured in 2013. It features an impressive working area with an X-axis of approximately 4300 mm and a Y-axis of around 2250 mm. The machine is equipped with a powerful 10 kW spindle capable of reaching up to 24,000 RPM and includes a 14-position automatic tool changer. If you are looking to get high-quality CNC routing capabilities, consider the HOMAG WEEKE BHP200/VANTAGE714 machine we have for sale. Contact us for further details. • Series: Weeke Vantage 200 platformElectrical specs (from plate) • Supply: 415Y / 240 V • Phases: 3-phase • Frequency: 50 Hz • Full load current: 61 A • Recommended fuse: 80 A • Control voltage: 24 VSpindle • Tool interface: usually HSK-F63 Rodpfozatdbsx Afhecd • Tool change: automaticAxes • Servo-driven gantry systemTool changer • 14-positionDrilling block • Vertical drills • Horizontal drills • Grooving sawTable type • Flat nesting vacuum table • MATRIX table variants • Zoned vacuum system • Automatic vacuum controlController / software (usually paired with) • HOMAG Power Control / Homatic 2000 IPC • WoodWOP software • MCC production software

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, installation height: 430 mm, throat depth: 400 mm, operating speed: 50 mm/s, reverse speed: 200 mm/s, back gauge speed R-axis: 200 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, power: 17.3 kW (23.52 HP), warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Rcodpjwzqx Hjfx Afhed Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: used, Year of construction: 2012, power: 7.5 kW (10.20 HP), travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, number of slots in tool magazine: 12, No. 3274 Rcsdpfjy S Edxox Afhjd CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working area X 4000 mm Working area Y 1550 mm Working area Z 300 mm 1 milling spindle Main motor 7.5 kW Maximum speed 24000 rpm Tool clamping system HSK-F63 12 tool changer positions 17 vertical drilling spindles 2 horizontal drilling spindles X 2 horizontal drilling spindles Y Grooving saw, 90° swiveling Edge banding unit Separate Y-axis Console table, 6 consoles Vacuum pump Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WoodWop 7.1 (updated in 2018, cost approximately €9,500) Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, 11 kW power, HSK 63F mount 17 vertical drilling heads Horizontal drilling head with cross positioning + blade Milling and edge trimming unit 360° edge gluing unit Combined edging and scraping unit Edge banding magazine with 2 stations Circular magazine with 12 stations Control system: Power Control PC 85 Work table with 8 rails and vacuum cups Elmo Rietschle vacuum pump Safety mats Chip conveyor Rcjdpoyprr Nsfx Afhod Includes 4 aggregates (edge trimming blade, edger, combined edge scraper/edger, horizontal 4-spindle drilling unit) and vacuum cups. Only approximately 4,100 operating hours. Machine in excellent condition Available immediately

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Rcodey In Avjpfx Afhjd Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Rjdpfxoy In Aps Afhecd Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes