Used Hood-Shrinker for sale (808)

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fgsdpjvvkfdsfx Aa Nsb

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Fgodpfx Aow I Uinsa Njb Location: Flörsheim

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Fgedpfoy Rglnsx Aa Neb Complete object description can be found in the documents.

Condition: used, Year of construction: 2005, Overview  This shrink hood applicator was manufactured in 2005 by Italy MARFIN. The machine is designed for packaging of PET products on pallets using shrink hood application. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  Capacity: up to 50 pallets/hour Formats: 1.5 L – 3×2 – 1200 × 800 0.5 L – 4×3 – 1200 × 800 Application: PET Configuration: Shrink hood applicator Fjdpfxjy Hmp Es Aa Nogb

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GBW 22 P DDS Noise protection hood: 66 dB(A) 7m Continuous 3-phase power: 20.12 kVA / 16.10 kW Maximum 3-phase power: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Perkins 404J-22G Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2220 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Consumption at 3/4 load: 4.0 liters Consumption at full load: 5.74 l/h Fuel tank capacity: 51 l Generator: MeccAlte ECP28-M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Sockets with FI: 1x 32A - 400V / 5-pole Dimensions and weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank capacity: 51 liters Weight, dry: approx. 546 kg Central crane loading eye Fodeq A T Dwepfx Aa Njgb Forklift can be driven under Glow pins Engine preheating PHS Battery charge retention

Year of construction: 2008, condition: excellent (used), Wachtel Piccolo II Bakery Oven Fgedsx Rbpujpfx Aa Nsb - used - year of manufacture: 2008 - electric - 4 chambers 1.2 x 0.8 m - manual control - steam generators for all chambers - power: 25 kW - oven on mobile base - without hood - device overhauled - price on request

Condition: good (used), Year of construction: 2000, Matador MD 151 Bakery Oven - used - year of manufacture approx. 2000 - surface area 15 sqm Fsdpfx Aasy Alhlj Nogb - manual control - 5 chambers, each 1.8 x 1.6 m - hood with fan - machine from production - requires inspection/overhaul - overall technical condition good - collection from warehouse/shipping possible - price on request

Condition: good (used), Year of construction: 2000, Chamber Oven Miwe Ideal - Model 600/6R - used - year of manufacture: 2000 - area: 6 sqm - manual control - 6 chambers, each 0.6 x 1.6 m - hood with fan - oil or gas burner - oven from production Fgedpfeyzy Eisx Aa Nsb - technical condition: good - price on request

Condition: excellent (used), Year of construction: 2013, Hein Luxrotor rotary oven - used - year of manufacture: 2013 - suitable for 58x98 trays - electric - power approx. 70 kW - computer control with touchscreen - extractor hood with fan - ceramic wall Fodpfsxy Rbiox Aa Njgb - 1 rack trolley - top locking system for trolley - good technical condition / device checked and cleaned - collection from warehouse - price on request

Condition: excellent (used), Year of construction: 2016, Hein Universal Tube-Type Bakery Oven - Model: EA 2 6060 Fedpfx Aaexwwu Ds Negb - Year of manufacture: 2016 - Area: 22 sqm - 6 chambers, each 1.8 x 2.0 m - Hood with fan - Semi-automatic device Spider/Hewa - Vacuum cleaner - Computer control - Technical condition: very good - Self-collection from bakery or warehouse - Price on request

Year of construction: 2007, condition: good (used), Embroidery oven Miwe Roll-in - used - year of construction 2007 - for sheets 60 x 80 - computer control - oil or gas burner - fume hood with fan - 1 trolley - general overhaul - from stock or with delivery Fedpoir I T Hefx Aa Negb - with guarantee - Price on request

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: Fedpfxorz Irre Aa Nogb 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Fedpfx Asrbyrpja Nogb Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 h Year of manufacture: 2022 Recirculating Air Corrosion Change Test Chamber / Salt Spray Test Chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 suitable for corrosion, salt spray, condensation water, and climate change testing applications. The unit is ideal for use in industry, research, development, and quality assurance. Fgedpey Hkg Iefx Aa Njb Technical Data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring flushing line Year of manufacture: 2022 Test chamber volume: approx. 1,450 liters Temperature / Climate Data: Temperature range (climatic test): +23°C to +70°C Humidity range: 20% to 98% r.h. Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation water test: ambient temperature +5 K to +42°C Electrical Data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant as per nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t LP max.: 17 bar g HP max.: 25 bar g Media Connections: Compressed air / GN2: max. 12 bar Deionized water: min. 3 bar / max. 5 bar Water connection for ring flushing line: max. 6 bar Condensate drain available Exhaust air connection available Power supply: 3/N/PE 400 V / 50 Hz Dimensions (according to drawing): External dimensions: approx. 3710 x 1537 x 1769 mm Test chamber length: approx. 2365 mm Loading height: approx. 850 mm Weight (according to nameplate): approx. 710 kg Operating hours (as indicated): approx. 11,889 h Equipment / Features: S!MPAC / WebSeason touch control panel Ethernet / Network connection USB interface Salt spray Condensation water test Dry climate Climate / humidity operation Ring flushing line Storage tank Rod inserts Control cabinet integrated Exhaust air connection Compressed air connection Connection for deionized water Water connection for ring flushing line Condition: used Unit is fully visible as per the images provided. Current status: external operating mode. Display notice: hood not closed. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection by appointment is possible. Loading can be organised. (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and fine sanding machine, Kundig Brilliant wide belt sander with electronic segmented sanding shoe, tiltable sanding unit, and lacquer sanding capability. Fgodpfoyxg N Njx Aa Nsb A video of the running machine can be provided upon request. Ideal sanding machine for interior construction businesses, also suitable for intermediate lacquer sanding. Single-belt machine with combination sanding unit and electronic segmented pressure beam. Edge segments can be switched on and off. Pressure beam segment width 22mm (ideal for intermediate lacquer sanding). Pneumatically adjustable calibration roller, grooved rubber-coated roller with grit compensation. 11 kW drive motor. Infinitely adjustable cutting speed between 3 - 15 m/s via frequency inverter. Feed belt speed steplessly adjustable from approx. 3 to 15 m/min. Belt blowing device, workpiece-controlled. Constant table height of approx. 950mm by adjusting the upper machine section, thus integrable into sanding lines. Feed belt still very grippy and in very good condition. Conveyor carpet with adjustable vacuum blower enables secure holding of even small parts. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions: 1120 x 2000mm. Infeed and outfeed roller tables. Hood lock. Extraction connections: 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, calibration roller adjustment, and segment sanding shoe parameters. Thickness measurement system with adjustable chip removal and Enormatic automatic thickness adjustment with feed release, eliminating the need for constant manual caliper measurement. Programs for different sanding tasks can be saved and selected via smartselect. CE mark. Operating manual. 2 sanding belt inserts available. The four bellows have been replaced. Without the connection cable shown. Original paint, only a few touched-up spots. Very good condition from a small workshop. Machine has approx. 1,395 operating hours, i.e. about 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2300kg. Includes large mobile storage table at belt height for sanding belt storage. Table size approx. 1520 x 1360 x 950mm. Includes various sanding belts from K80 to K400. The machine can be demonstrated at our premises by appointment. We only offer machines that are available and ready for demonstration in our warehouse—see "more offers from this supplier."

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Fsdpfxeq H Sqdo Aa Nogb Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, Year of construction: 2014, machine/vehicle number: CA79, Used R&G 12 capsuling machine - 12000 BPHTechnical Specifications & Performance DataThis single-station R&G capsuling machine model Z 12 is engineered for high-speed capsule application in professional wine bottling environments. It combines PVC capsule heat-shrinking with sparkling wine hood folding/smoothing in an interchangeable turret configuration, delivering reliable performance for industrial packaging and beverage production.Production speed: up to 16,000 bph with PVC heat-shrinking; up to 12,000 bph for champagne/sparkling hood smoothingApplication technologies: PVC shrink capsules and sparkling wine capsule folding/smoothingNo. of heads: 12 heat-shrinking heads interchangeable with 12 pneumo-mechanical folding/smoothing headsRotation/infeed direction: left-to-right, clockwiseCapsule magazine capacity: approximately 10,000 piecesBottle handling: designed for glass bottles and standard wine bottling formatsYear of manufacture: 2014Machine type: Single-station capsuling machineModel code: Z 12Advanced Automation & Control SystemsThe Z 12 integrates recipe-driven automation to simplify changeovers and ensure repeatable quality. Automated motions and intelligent sensors support consistent capsule application while reducing operator intervention.Automatic machine height adjustment via recipeUniversal feed screw with automatic adjustment from stored recipesCap/cage detector for no-capsule conditionCapsule presence detector with automatic machine stopInterchangeable turret tooling for rapid switch between PVC shrink and sparkling smoothing operationsProduction Line Integration CapabilitiesBuilt to integrate seamlessly into a used bottling line or as a standalone workstation, this capsuling machine supports efficient material flow and quick adaptation to upstream/downstream equipment in beverage production.Universal infeed/outfeed star-wheels for smooth transferCompatible with standard wine glass bottle geometriesIdeal for integration with corkers, wirehooding units, labelers, and conveyorsRecipe-based adjustments reduce format changeover timeMachine Condition & Maintenance HistoryThis second hand capsuling machine is presented in operational condition and suitable for immediate integration following standard commissioning. Its automated recipe controls and robust turret design support consistent performance in continuous operation.Operational Performance & VersatilityThe Z 12 is designed for wineries and beverage producers seeking dependable capsuling with minimal downtime. Its dual-function turret allows switching between PVC capsule heat-shrinking and sparkling hood folding/smoothing without compromising speed or consistency. Intelligent detection systems safeguard product quality by verifying cap presence and stopping the machine automatically when needed.High-speed PVC shrink capsule application for still winePneum... Fodpey Ef T Hjfx Aa Negb

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, Year of construction: 2018, operating hours: 455 h, Kaeser M 43 PE compressor, year of manufacture 2018, 455 operating hours, flow rate 4.3 m³, 4-cylinder Kubota water-cooled engine, 30.1 kW, tool oiler, serial no. WKA0F0851J6662325, plastic hood cracked in several places, compressor is functional, truck coupling, documentation available, never registered. Fgodpfx Aasy N Spij Neb

Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Fsdpevw Uf Dsfx Aa Nsgb Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) Fodjwh Shcepfx Aa Njgb • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Condition: excellent (used), Year of construction: 1986, operating hours: 60,000 h, functionality: fully functional, This offering comprises a complete production line for manufacturing Rubber and EVA foam. The line features machinery by leading manufacturers, including German brands such as Fecken Kirfel, Boge, and Wesero; Italian companies such as Moderne Meccaniche, Mapelli, Terenzio, Vigevano, and FGB; as well as Taiwanese manufacturer Kim Ho Sheng, among others. The production line consists of several large industrial machines, each equipped with operator platforms, intuitive control panels, heavy-duty metal rollers, and exhaust hoods. Most machines have a green finish and are fitted with prominent blue motors. Elevated sections are accessible via staircases, and control panels and electrical cabinets are mounted conveniently on the right side of certain units for streamlined operation. Production line components include: - 1 Italian 40-liter Banbury mixer (Moderne Meccaniche) - 1 Italian open mixing mill (Moderne Meccaniche) - 4 Taiwanese open mixing mills (Kim Ho Sheng Industrial Co., Ltd.) - 1 Greek-built conveyor belt with integrated automatic cutting system - 1 large Italian vulcanization press (Terenzio, 6 plates) - 2 medium-sized Taiwanese vulcanization presses (DAH TYAN HYDRAULIC MACHINE INDUSTRIAL CO., LTD, 6 plates each) - 1 small Greek vulcanization press (MIEL, 2 plates) - 1 German rubber buffing machine (Wesero) - 4 German bandknife horizontal splitting machines (Fecken Kirfel: 2 x K11, 2 x G1) - 1 Greek strip cutting machine - 1 Greek granulator (MIEL) - 1 Italian thermoforming machine (Vigevano) Fedpfx Aeyrbybsa Nsgb - 2 Italian semi-automatic travelling head cutting presses (MAV-2, Vigevano) - Approximately 100 iron chrome-plated moulds suitable for rubber and EVA foam - 1 German industrial screw compressor (Boge C30) with a 1,000-liter tank and Omega dryer - 1 Greek oil steam boiler, 800 kg capacity (PROODOS) - 1 Italian burner (Riello RL70) - 1 Greek-manufactured industrial chiller, 174 kW capacity - 1 German industrial air heater (Wolf) - 1 heating chamber - 1 French PVC mixer (Lancelin) - 1 Greek floor-standing electronic weighing scale, 1,500 kg capacity (LION ENGINEERING) - 1 German industrial aluminium scaffolding (Krause, 6 meters) - 4 Italian trimming machines (FGB) - 10 assorted scales This comprehensive production line offers a turnkey solution for rubber and EVA foam processing.

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a Kim Ho Sheng Industrial Co Ltd rubber and plastic open mixing mill, model ROLL 16x42'' L, manufactured in 1978. The machine features two large metal rollers designed for mixing rubber and plastic materials. It is equipped with a substantial exhaust hood and duct system positioned above the rollers to provide ventilation during operation. Control handles are located on both sides of the machine, allowing for manual adjustments and operation. This mixing mill is suitable for industrial rubber and plastic processing applications where open mixing mills are required. Fedpfxoyqyb Uj Aa Nogb

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Vertical Finger Jointing Line with Surfacing Minimum section dimensions: 70 × 20 mm Maximum section dimensions: 280 × 110 mm Minimum joint length: 700 mm Length of joined boards: unlimited The line consists of: Motorized roller conveyor - 1 motor, 0.75 kW, Speed: 15/90 m/min - Dimensions: 6,000 x 300 mm Compact Vertical Automatic Finger Joint - 1 feeding unit for boards with 2 chrome-plated rollers, Ø 250 mm - 1 mobile horizontal station for joint closing - 1 clamping unit on the mobile horizontal station for incoming boards - 1 anti-splintering device on the mobile horizontal station - 4 adjustable lateral pushers for positioning boards against the main reference - 1 dual-spindle profiling unit - 1 chip extraction hood for saw heads Ø 200 mm - 1 gluing unit for polyurethane adhesives, complete with: - 2 stainless steel valves - 2 profiled combs - 1 fixed clamping unit on the main structure - 1 advancement unit for jointed boards with 2 rollers Ø 250 mm (Teflon coated) - 1 measuring unit for cross-cutting with encoder - 1 safety enclosure - 1 hydraulic power pack - 1 control panel Automatic Unloader - Dimensions: 14,000 x 1,000 mm - 1 roller track for moving the jointed lamellae - Inclined steel side frame for storage of the jointed lamellae - 1 pneumatic side pusher Complete line equipped with: Fgjdpfx Aoy I Alrea Nsb - SPAPUR 300 spray gluing unit, designed for polyurethane (PU) adhesive - Machine for shear and bending strength tests KN 50

Condition: used, 21-12- Wood bandsaw NP HANSENS (used) Motor power 3,7 kW Wheels diameter 800 mm Max cutting height 320 mm Dust exhausting hood Ø100 mm Fodpfjtq Tnxox Aa Nogb Table dimensions 750 x 630 mm Made in Denmark Transport dimensions 2400x800x1700 mm Weight 690 kg Price 1150 Eur (EXW Jonava, Lithuania)

Condition: used, Automatic frying line HOJA DRL1000 Technical specifications: - Frying time: 40–345 sec, - Maximum frying temperature: 240°C / 460°F, - Machine dimensions (L × W × H): 2000 × 2600 × 2200 mm, - Total weight: approx. 750 kg, Fgjdpfx Aaoxay I Sj Nsb - Outer pan diameter: approx. 1 m, - Usable frying width: approx. 285 mm (11.22″), - Shallow frying with oil level up to 5 mm (0.2″), - Cast iron, flat pan; flatness deviation not greater than ±0.1% of the diameter, - Frying time: from approx. 40 to 345 s, - Maximum heating power: approx. 28 kW, - 2 temperature sensors per pan. Included: exhaust hood, dispenser, spray system, oil filter.