Used Hundegger Hundegger K1 for sale (1,207)

Condition: used, mileage: 2,35,283 km, power: 350 kW (475.87 HP), axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, - Brake system For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Mercedes-Benz Actros 1848 L 4x2 skip loader Iedpfxey D Dm No An Detf Body: Meiller AK 12.T, radio remote control, axle, wheel mounting track, narrow, front axle 8.0 t, front axle cranked design, rear axle with 440 crown wheel, hypoid, 13.0 t, rear axle with active lubrication, unregulated, axle ratio i = 2.611, electronic braking system with ABS and ASR, heater, electronic air supply unit, electronic air supply and control, medium, disc brakes on front and rear axles, electronic parking brake, secondary oil retarder, condensate monitoring for compressed air system, steel compressed air tank, additional compressed air tank, trailer brake, 2-line, brake connections left, trailer stability assist (TSA), trailer brake connection rear, Duo-Matic + standard, frame overhang 1500 mm, wheelbase 4000 mm, one-circuit steering, stabilizer front axle, additional stabilizer rear/trailing axle, smoker package, compressed air connection in cab, driver's air-sprung comfort seat, co-driver function seat, seat backrest release, driver's seat, lower comfort bed, PremiumComfort mattress lower, seat cover velour, shaving mirror, curtain across bed(s), LED ambient lighting for driving and living, electric stationary air conditioning, automatic climate control, residual heat utilization, hot water auxiliary heater cab, additional thermal insulation, storage compartment lids driver and co-driver side, drawer under ledge, storage compartments above windshield, electric sliding/tilting glass sunroof, low seat box, lowered by 40 mm, pre-installation for upper comfort bed, wide, high load parameter level 2, regulated alternator 24-30 V/150 A, AGM batteries 2 x 12 V/220 Ah, maintenance-free, circuit breakers, auxiliary socket 12 V/15 A in co-driver footwell, power socket 24 V/25 A in co-driver footwell, socket 24 V/15 A in right-hand sidewall compartment, night drive light switch, 24 V trailer socket, 15-pin, reverse warning system, cable remote control for air suspension, L-cab StreamSpace, 2.30 m, tunnel 170 mm, comfort steel-cushioned cab suspension, exterior storage compartment lid left, exterior storage compartment lid right, exterior sun visor transparent, A-pillar trim, tinted windshield, heated front mirror, main mirror with maneuvering position passenger side, air horns cab roof, plastic corner bumper, center bumper part with towing eyes, door extension, driver cab access left/right, fixed, central locking system, comfort central locking, light sensor, rain sensor, economy/power driving program, Predictive Powertrain Control, transmission G 281-12/14.93-1.0, single disk clutch, Mercedes PowerShift 3, air suspension rear axle, digital tachograph 2nd generation, ADR, tachograph manufacturer VDO, two-way speakers, aux-in right-hand sidewall compartment, navigation system, CB radio 24 V, multimedia cockpit interactive, Remote Online, main fuel tank left, 390 L tank left, 650 x 700 x 1000 mm, aluminum, AdBlue tank 75 L left, lockable tanks, protective cap for AdBlue dosing system, exhaust system with tailpipe to right side, lighting according to UN-R 48.06, Bi-Xenon headlights, LED daytime running lights, automatic high/low beam and cornering lights, halogen fog lights, lower work lights, headlamp cleaning system, undershield against dust turbulence, torque increase in...

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. Ijdpsy D Dr Sofx An Djtf New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: used, Year of construction: 2018, operating hours: 1,960 h, * Operator suspension seat ----Configuration: Driver's cab with cab heater, travel speed 4.5 km/h, Kubota 3-cylinder water-cooled diesel engine Type D1105-E4B, 15.6 kW, dozer blade 1700x335mm, track width 300 mm. Maximum digging depth 2,820 mm, maximum reach 4,740 mm, breakout force: 21 kN. Mechanical quick coupler, 2 additional hydraulic outlets, hydraulically tiltable ditching bucket 1,360 mm----Short tail, ideal for work in confined spaces. Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. Our General Terms and Conditions (see legal notice) apply to all contracts of sale, invoices, pro forma invoices, orders, and sales talks. Isdpoy Dwlrefx An Djtf

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm Itjdpfx Anotxkunj Djf -Weight: 0.7 kg

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm Isdpfxovuunmo An Dstf dayligth 1000 mm table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm Ijdjvuugcopfx An Djtf permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Itodpfx Aoxxvqajn Dof

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller model: itnc 320, table load: 2,500 kg, rotational speed (min.): 6,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Used Sigma EK110/50, regularly maintained, with new Heidenhain iTNC320. The machine can be inspected under power. Ijdpewurr Iefx An Djtf

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min Iodpeyv Nb Njfx An Dotf weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: used, empty load weight: 4,600 kg, maximum load weight: 27,900 kg, first registration: 09/2005, next inspection (TÜV): 07/2022, total length: 8,500 mm, total width: 25,500 mm, total height: 33,000 mm, suspension: air, tire size: 385 / 65 R 22.5 / 6mm, front tire size: 385 / 65 R 22.5 / 6mm, number of seats: 2, operation weight: 32,500 kg,

Condition: excellent (used), Year of construction: 2011, BAR PROCESSING CENTER Federhenn SBZ 150 G, Type 81.25K150 for machining pre-cut profile bars with inserted steel reinforcement. The machine essentially consists of: MACHINE BASE FRAME of a solid welded steel construction; 1 LINEAR MODULE with gripper for precise positioning of the bars to be machined; CONTROL CABINET with all electronic and pneumatic components, equipped with drilling units for the following operations: - Dowel hole drilling, - Transom hole drilling, - Mounting hole drilling; OUTFEED GRIPPER mounted on a linear axis for placing the bars onto a cross conveyor module; OUTFEED MODULE for profiles out of the SBZ processing system via a belt conveyor. The bars are manually removed at the end of the conveyor, including occupancy monitoring at the table end. Standard module length: approx. 3,000 mm; SAFETY PARTITIONS; SCREW MAGAZINE and externally mounted screwdrivers. Itsdpfjy Dtg Eex An Def

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climate test chamber Weiss WK 10/40-80 Version: water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery testing: The climate test chamber is equipped with extended safety features for battery and accumulator testing (e.g. lithium-ion): • Pressure relief flap for controlled pressure release in the event of a malfunction • Gas warning device for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and testing environments (subject to a customer-provided safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system allows for temperature and humidity testing across a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: - Functional and service life testing - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g. lithium-ion) under defined climate conditions (subject to customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel, programs can be stored and automated. The system was in operation until recently and is fully functional. General information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control system: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % RH Humidity accuracy: ± 5 % Dimensions: External dimensions (W×D×H): approx. 3,300 × 5,000 × 2,500 mm Internal dimensions (W×D×H): approx. 3,000 × 2,200 × 1,500 mm Test chamber volume approx. 10 m³ Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control / web panel Operating manual (German) Nameplate & documentation Condition: used Itjdpfx Aeyyu Rqjn Djf Scope of delivery: (see image) (Change and errors in technical details and specifications excepted!) For further questions, please feel free to contact us by phone.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75 r17,5, color: red, The images are archive images; the vehicle may still be in use! Further information Steel welded construction, continuous tilt shaft at the rear with 80 mm ball bearings Front transmission support leg, folding rear support, 2 wheel chocks with brackets, steel underride guard, full-width rear mud flaps, quarter-shell fenders, spare wheel, same make as base tire, steel rim, loose, 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note! The side panel touches the storage compartment when folded down. ``` Lockable storage space for loading ramps beneath the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair: 8,000 kg (rear ramp attachment bar). Towbar with tested 40 mm towing eye, towbar height adjustable via spindle, max. adjustment range: 300 mm. BPW drum brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). Dual-line pneumatic brake system. Color-coded cable routing for easy servicing. Manual spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connecting cable. Caution: The trailer may only be towed by towing vehicles that ensure the ABS is effective. 2 interchangeable coupling heads at the front, with connecting cables to the towing vehicle. 24-volt multi-chamber lights, yellow LED side lighting, 2 white position lights at the front. 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable connectors at the front, with connecting cable. Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose. Hydraulic operation via the truck's PTO. Ijdpolhpzvsfx An Dotf Sturdy tipping body with 4 mm sheet steel floor, steel side wall construction, continuous side walls, foldable and pivoting with central locking at the bottom. Rear corner stanchions are pluggable. The rear wall is foldable and pivots, with central locking at the bottom. Bedside length approx. 5,000 mm, side walls with 6 hinges at the bottom, bed width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with DEKRA approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for a single-line license plate holder, contour markings with reflective stripes according to ECE R 048, white on the sides and red on the rear

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, tire size: 235/75 r17,5, color: green, operation weight: 3,240 kg, Further information Welded steel construction, continuous tilting shaft at the rear with 80 mm ball tilting bearing, gear support foot at the front, folding rear support, wheel chocks with holder, steel underride guard, rear spray flaps across the entire width (not in conjunction with forklift bracket), quarter-shell mudguards, spare wheel, same make as basic tires, steel rim, loose, plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery)Note! Dropside touches storage box when folded down, lockable storage space for access ramps underneath the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (suspension bar for ramps at the rear) Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 300 mm BPW drum brake axles, laser-measured axle/chassis Reduction in tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) 2-line compressed air brake systemColor-coded cable routing for easy servicing, hand spindle parking brake Integral air reservoir, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connecting cable to the motor vehicle 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck, hydraulic connection with SVK plug NW 10/3, incl. connecting hose, hydraulic actuation via truck power take-off Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Itjdpfx Ansk E Tdas Dsf Dropside retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, 5 tons each. Operating instructions: The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: used, Year of construction: 2019, We offer a pressure blasting cabinet with complete accessories. Inner cabin width: 1500 mm. Year of manufacture: 2019. Fan power: 1.1 kW. Elevator power: 1.5 kW. Screw conveyor power: 0.75 kW. Cabin lighting: 2 x 50W. Automatic filter with shaker: 0.8 kW. The equipment is fully functional and in excellent condition. Itjdpfx Asyz Ithjn Dsf

Condition: used, Year of construction: 2009, total length: 4,100 mm, total height: 3,050 mm, total width: 1,800 mm, Empty weight: 5.000 kg Price: On request - Year: 2009 - Documentation available: No - CE certificate present: No - Serial number: 1442 - Main motor power [kW]: 37 - Rotation speed [rpm]: 1480 - Hydraulic unit power [kW]: 2.2 - Rotor width [mm]: 1000 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 1050 - Opening length [mm]: 1300 - Sieve perforation [mm]: 25 - Number of rotating knives [pcs.]: 26 - Transport dimensions: 4100mm x 1800mm x 3050mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iodex Ig Svjpfx An Djtf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 2,450 mm, total height: 2,300 mm, total length: 1,700 mm, Empty weight: 3.500 kg Price: On request - Documentation available: No Iedpfx Ajytghmen Dotf - CE certificate present: No - Serial number: 82032635 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Top - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 265 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Top - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 265 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 3: - - Position: Top - - Type of unit: Brush unit - Max. working width [mm]: 1300 - Outfeed table length [mm]: 1200 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Power [kW]: 40.0 - Transport dimensions: 1700mm x 2450mm x 2300mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 7,46,765 km, power: 382 kW (519.37 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: black, gearing type: semi-automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space length: 6,200 mm, loading space width: 2,490 mm, loading space height: 730 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, Body: - Flatbed with aluminium drop sides - Internal dimensions: 6,200 mm x 2,490 mm x 730 mm - Raised front wall - Tool/storage boxes - Lashing rails in the flatbed floor Crane: - Palfinger PK 17.001 SLD 3 - Radio remote control - Slewing servo - 2-point stabilizers Outreach / Lifting capacity: - 4.10 m = 3,850 kg - 6.10 m = 2,450 kg - 8.10 m = 1,800 kg - 10.30 m = 1,400 kg Equipment: - Cab: spacious Highline - Air conditioning - Auxiliary air conditioning - Auxiliary heater - Full leather seats - Driver’s air suspension seat with seat heating - 2 beds - Sun visor Isdpfeytzbnex An Detf - Liftable steered axle - Alloy wheels - Additional diesel tank - C-type trailer coupling with continuous braking system Technical features: - Radio/CD, AUX - Navigation system - CB radio - Multifunction steering wheel - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Additional headlights Safety & Environment: - ABS - Retarder - Rear axle differential lock - Euro 6 emission standard Other: - First registered in Germany - 1 previous owner / 1 driver - Payload 11,710 kg according to registration papers - Very well-maintained condition Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles, including vans, commercial vehicles and construction machinery! We continuously offer attractive financing options with special terms. On request, we’ll gladly provide you with a tailored quote! Trade-in of your commercial vehicle/construction equipment is welcomed. If a new TÜV inspection is required, we can provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged through our external partners for an additional charge. The details presented in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Errors and prior sale excepted.

Condition: used, mileage: 7,46,765 km, power: 382 kW (519.37 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: black, gearing type: semi-automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space length: 6,200 mm, loading space width: 2,490 mm, loading space height: 730 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, Body: - Flatbed with aluminium drop sides - Internal dimensions: 6,200 mm x 2,490 mm x 730 mm - Raised front wall - Tool/storage boxes - Lashing rails in the flatbed floor Crane: - Palfinger PK 17.001 SLD 3 - Radio remote control - Slewing servo - 2-point stabilizers Outreach / Lifting capacity: - 4.10 m = 3,850 kg - 6.10 m = 2,450 kg - 8.10 m = 1,800 kg - 10.30 m = 1,400 kg Equipment: - Cab: spacious Highline - Air conditioning - Auxiliary air conditioning - Auxiliary heater - Full leather seats - Driver’s air suspension seat with seat heating - 2 beds - Sun visor - Liftable steered axle - Alloy wheels - Additional diesel tank - C-type trailer coupling with continuous braking system Technical features: - Radio/CD, AUX - Navigation system - CB radio - Multifunction steering wheel - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Additional headlights Safety & Environment: - ABS - Retarder - Rear axle differential lock - Euro 6 emission standard Other: - First registered in Germany - 1 previous owner / 1 driver - Payload 11,710 kg according to registration papers - Very well-maintained condition Ijdpfx Aey Dmmlsn Detf Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles, including vans, commercial vehicles and construction machinery! We continuously offer attractive financing options with special terms. On request, we’ll gladly provide you with a tailored quote! Trade-in of your commercial vehicle/construction equipment is welcomed. If a new TÜV inspection is required, we can provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged through our external partners for an additional charge. The details presented in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Errors and prior sale excepted.

Condition: used, Model: K126H AC-8 Year of manufacture: 2016 Condition: Used Itodpfxeyy Izcs An Def Serial number: 16090-1 Stock number: 3310 Drum: 120 liters Equipped with BW200 infeed and discharge system Knife rotation: steplessly adjustable, max. 5250 rpm Bowl speed: 2 speeds Mixing speed: 2 reverse speeds Control: Command 1000K Power: 3 x 400V, 50Hz, 87kW Dimensions: 2200 x 2700 x 1700 mm Weight: 2000 kg

Condition: used, maximum load weight: 27,570 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2023, next inspection (TÜV): 04/2027, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, Year of construction: 2023, Equipment: ABS, Knapen Type K 100 A5060 3-axle moving floor semi-trailer in wedge-shape design, loading dimensions (internal): approx. 13,530 x 2,480 mm, internal heights: front 2,690 mm and rear 2,785 mm, load volume approx. 92 cbm, fifth wheel height approx. 1,150 mm. BPW axles: 3 x 9,000 kg air-suspended with lifting and lowering device, ABS, drum brakes with EBS, lift axle, WABCO braking system (2S/2M), WABCO control box, lighting system with 2 pairs of LED round lights and LED fog/reversing lights, various position lights. CARGO-FLOOR Type CF 500 SL-C, 21-board floor system made of 10 mm smooth 'Extreme Durable' with welded aluminium end caps, extra reinforced for forklift use. Moving aluminium partition wall with trailing curtain for complete discharge. Smooth side walls inside and outside, side wall profiles 30 mm thick – 3 mm inside, 2 mm outside, wear plate along 6,000 mm length and 2,000 mm height. Rear cross beam swivels to one side with tension lock, central locking for double rear doors, foldable rear light covers, side underrun protection, plastic tool box on left side, control unit for moving floor, front work/walking platform with access ladder left and right, Orlaco reversing camera type 'Famos 102', inspection door in front wall (driver's side left), PVC sliding tarpaulin fixed on the right in the direction of travel, Jost landing gears, tyres: 385/65 R 22.5 // 6-fold, unladen weight 8,430 kg, technically permissible gross weight 42,000 kg, one owner, body painted in Knapen grey AC226 neutral, well-maintained overall condition! Not a rental vehicle! Sale to commercial customers only! All information provided without guarantee! Subject to errors and prior sale! Itodpoy Dmmxofx An Dof

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, MAREL Automatic Killer K-15 Automatic poultry slaughter system from the renowned Marel brand – an Automatic Killer device designed for efficient and humane slaughter in poultry processing plants. The offered device is a component of a slaughter line, ensuring precise and repeatable operation while maintaining the highest standards of animal welfare and production hygiene. The system is designed for continuous operation in high-capacity plants. Key features and benefits: - High efficiency and operational reliability - Process automation – reduces manual labor - Precise operation for consistent process results - Stainless steel construction – easy to clean - Compliant with sanitary and industrial standards - Can be integrated with an existing MAREL processing line Technical condition: Used – very good – immediately ready for operation Technical data: - Manufacturer: Marel - Model: Automatic Killer K-15 - Type: 3768196 - Capacity: up to 15,000 bph - Year of production: 2011 Installation and commissioning support available. Please contact us for detailed information and to receive a customised quotation tailored to your facility’s requirements. We offer a wide range of related equipment. MAREL / STORK / STUNNER / AUTOMATIC KILLER / K-15 Ijdoyzglcspfx An Detf

Condition: used, mileage: 8,152 km, power: 400 kW (543.85 HP), first registration: 02/2024, fuel type: diesel, empty load weight: 11,225 kg, maximum load weight: 6,775 kg, overall weight: 40,000 kg, axle configuration: 4x2, next inspection (TÜV): 02/2024, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total width: 25,500 mm, operation weight: 18,000 kg, Equipment: air conditioning, crane,

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Itjdpfx Aji Ri Eien Djf 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: SRF K 10 FM BIA W2, type of input current: AC, overall weight: 90 kg, input voltage: 230 V, total width: 640 mm, total length: 910 mm, total height: 1,640 mm, volume flow: 1,000 m³/h, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 2,400 Pa, power: 1.1 kW (1.50 HP), arm reach: 2,750 mm, hose length: 2,750 mm, Equipment: type plate available, ❇️ ESTA Welding Fume Extractor with Extraction Arm – Mobile, High Performance, Industrial Quality Very good condition | Fully functional | Well-maintained workshop/industrial machine — For sale is a mobile welding fume extraction unit by ESTA Apparatebau GmbH & Co. KG, equipped with a long, flexibly positionable extraction arm. The unit comes from a professional metalworking company, was only used occasionally, and is in perfect working order. Ideal for welding stations, grinding and soldering operations, as well as for general localized fume and dust extraction. — ❇️ Technical Data (according to ID plate) * Type: SRF K 10 FM BIA W2 * Year of manufacture: 2004 Ijdpfxey Da Ams An Djtf * Voltage: 230 V * Power: 1.1 kW * Rated current: approx. 7.7 A * Protection class: IP54 * Frequency: 50 Hz * Airflow (Vmax): approx. 1,000 m³/h * Filter surface area: approx. 10 m² * Max. negative pressure (Pa max): 2,400 Pa * Weight: approx. 89 kg — ❇️ Features & Specifications * Mobile extraction unit on castors * Long, sturdy extraction arm (approx. 275 cm) with easy-glide joints * Effective capture of welding fumes directly at the source * Robust industrial-grade construction * Simple operation via main switch * CE marking * Maintenance-friendly design — ❇️ Dimensions * External unit dimensions: Height approx. 164 cm × Width approx. 64 cm × Depth approx. 91 cm * Extraction arm length: approx. 275 cm — ❇️ Condition The welding fume extractor is in very good, fully functional, and well-maintained condition. Slight signs of use are present due to age and previous operation but have no impact on function or performance. — ❇️ Price & Market Assessment 1,390 euros (net) plus 19% VAT — ❇️ Sale & Transaction * Sale on behalf of customer * Invoice with VAT shown possible * Location: 72229 Rohrdorf * Loading by overhead crane available on site * Delivery possible on request for an additional charge