Used Icp Analyzer Spectrometer for sale (268)

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. Nedpfx Abjwhdnhe Uodb The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Njdpfxexw Ux Hj Ab Uedb Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Radiant Vision Systems ProMetric I IC-PMI29-XB Imaging Colorimeter High-end industrial imaging colorimeter camera designed for precise luminance and color measurement in demanding applications. This system belongs to the renowned ProMetric I series, widely used in display testing, LED inspection, and automated quality control environments. 29 Megapixel high-resolution imaging colorimeter Accurate luminance and chromaticity measurement Scientific-grade sensor for repeatable and reliable results High sensitivity and wide dynamic range Designed for industrial and laboratory use Compatible with Radiant Vision Systems software (TrueTest) Suitable for integration in automated inspection systems Applications Display testing (LCD, OLED, MicroLED) LED brightness and color validation Ndedpfxozwd Hys Ab Uob Surface inspection and uniformity analysis Automotive display and lighting validation Industrial quality control processes Technical Specifications Model: IC-PMI29-XB Resolution: 29 MP (6576 × 4384) Measurement: Luminance & Color (CIE) Interface: USB / Ethernet Made in USA Condition Used unit in very good condition, removed from a professional industrial environment. Fully functional / Untested (adjust based on reality). What’s Included Radiant Vision Systems ProMetric I IC-PMI29-XB Camera Radiant Vision Systems HALCON USB License Dongle (Software Key) Radiant Vision Systems USB Flash Drive Radiant Vision Systems Electronic Component (P/N 10856) Original Protective Carrying Case Accessories as shown in photos

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2004 Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Ndodpfx Abezrur Ns Uob Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine has already been tested and serviced by us. Upon request, we offer you the following services: - Commissioning of the machine at your site - Control system training - Accessories such as coolers and clamping devices

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Nsdpfx Abozb Il Nj Usdb Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, power: 103 kW (140.04 HP), fuel type: diesel, color: green, tire size: 17,5-25, Year of construction: 2010, operating hours: 11,738 h, machine/vehicle number: 384, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, Deutz engine Quick change device Total weight 11,000 kg max. load capacity 5,500 kg Max. lifting height 8,600 mm max. outreach 4,600 mm Ndedpfxoqt Dwfj Ab Ujb Errors excepted

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2012 Charmilles Millenium control system Travel ranges (X / Y / Z): 550 x 350 x 400 mm Travel ranges (U / V): 550 x 350 mm Max. conical angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg Njdpfszgt R Hjx Ab Uedb After receiving your order, we will clean and overhaul the machine and test all functions. You will receive a warranty of 6 months on the machine. We would be happy to offer you the commissioning of the machine.

Condition: excellent (used), Year of construction: 2009, operating hours: 3,350 h, functionality: fully functional, total length: 21,000 mm, total width: 1,200 mm, total height: 3,250 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 12 m/min, working width: 270 mm, We are selling our fully automated packaging line by CSP Engineering due to production expansion and renewal of our machinery park. The packaging line is engineered for maximum output, precision and reliability in industrial production environments. The line is currently functional in production. Main features - Automatic counting system Nedpfx Aey Rfftsb Uedb - Automatic label application with package quantity indication - Integrated folder insert system inside each package - Automatic wrapping and strapping system - Integrated measuring system - High production efficiency: up to 150 m2 per hour - Suitable for long profiles Technical specifications - Maximum plank length: 3100mm - Maximum plank width: 270mm - Widest point of the complete line: 3100mm Machine configuration and power requirements 1. Strapex system - 5.6 AMP 2. Parscan System - 10 AMP 3. Packaging Machine - 6 AMP 4. Oven - 40 AMP 5. Destacker - 25 AMP The line can be inspected in operation and is immediately available upon agreement. Keywords: Labeling, Destacking, Stacking, Strapping, Packaging, Packing, Parquet, Wood, Wrapping, Folder, Shrinking, Shrinkoven

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Nodpjx A Imzofx Ab Uedb Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: used, This listing is for an Astoria-Pacific 311 Chemistry Analyser The unit is in full working condition and is ready for immediate use This combination is for Ndodpfx Abexhftij Ujb 1. Astoria-Pacific 311 AutoSampler 2. Model 302D Micropump - Computer controlled 3. Model 303 Flow System 4 Model 305D Digital Detector Overview of the Astoria-Pacific 311 Sampler The 311 XYZ Sampler is a core component of Astoria‑Pacific's modular segmented flow analysis systems, such as the Astoria and Astoria2 analysers: Functionality It acts as a random-access sample introduction system in an XYZ grid format, enabling automated handling of samples in liquid analysis workflows Integration & Automation It is typically integrated with detectors, peristaltic pumps, and cartridge bases to form a complete automated analyzer capable of walk‑away operation and high throughput, with assay results available within 15–20 minutes upon sample loading Throughput & Sensitivity When paired with the Astoria Analyzer, systems using the 311 sampler can process between 90 to 120 samples per hour, delivering part-per-billion detection capabilities along with efficient reagent usage (up to 10× lower compared to traditional SFA systems) System Flexibility The 311 sampler offers flexibility and ease of use, allowing automatic insertion of check calibrants and compatibility across different system configurations (e.g., Astoria2, SFA3000) Support Modules For optimal performance, it can be paired with auxiliary modules such as the 322 Auxiliary Pump, which serves as a dedicated wash pump for the sampler4115 302D 303 305D Autosampler +

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, KRÜSS Type: FP8400 Remarks: (Year of manufacture 2019) The device has never been put into operation, is in new condition, and is in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analytical techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K) and lithium (Li) and alkaline earth metals such as calcium (Ca). The measurement is carried out simultaneously for these elements in a single step. Through consistent modernization of the flame photometers and a particular focus on safety concepts, completely new application areas are opening up for many cost-sensitive customer groups – from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of the main strengths of AES; in addition, the technology of the FP8000 series scores points with high determination accuracy. Measuring food samples Ndjdpfx Aoziap Ieb Ueb Determining the quality of high-purity glasses and vials for pharmaceutical packaging Concrete classification, analysis of infusion solutions. Flame photometer, laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: 0.001 mg/l for all elements Accuracy: +/-1% with appropriate quality of standards Precision:

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Ndsdpov Sd S Nefx Ab Usb Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. We would be pleased to offer the following services: - Cleaning and overhaul of the machine Ndedpfjzwv S Ijx Ab Ueb - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: used, machine/vehicle number: 9486, Year of construction: 2013, operating hours: 3,694 h, load capacity: 3,800 kg, lifting height: 13,000 mm, fork length: 1,400 mm, overall weight: 9,100 kg, enginetype: Diesel, manufacturer: Merlo Ndjdpfozca Ewox Ab Ujb

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Njdey Efbkspfx Ab Uodb

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Ndjdewin Emjpfx Ab Usb Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: Ndjdpfx Abjy A Nu As Uob - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Ndsdpfxsvu Syye Ab Ujb Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) Nodpfx Abjziyz Re Uodb - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: used, mileage: 1,65,000 km, power: 132 kW (179.47 HP), first registration: 12/2020, fuel type: diesel, overall weight: 7,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Special equipment: Storage compartment in the cab roof liner, storage compartment on the dashboard with USB port, front axle load 2.7 t, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, rear differential lock, automatic climate control, steering column (steering wheel) adjustable in height/length, light and rain sensor, switch for lighting in the cargo area, end cross member at the frame end, mud flaps at the front, seats in the cab: luxury driver's seat, Traction Plus (electronic traction control) with hill descent assist, auxiliary heater (hot water) with timer control Additional equipment: Driver's airbag, trailer stabilization program (TSM), trailer socket preparation, drive slip control (ASR), design: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, brake assistant, electronic brake force distribution, driving assistance system: hill start assist (AAS), driving assistance system: emergency braking assistant AEBS + City Brake, driving assistance system: lane monitoring assistant proactive (LDWS), digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, transmission automatic - Hi-Matic (8-speed), grab handle A-pillar, urea tank (AdBlue): 20 liters, body/superstructure: standard platform body, fuel tank: 90 liters, engine 3.0 liters - 132 kW diesel, wheelbase 5100 mm, spare wheel in driving tires, low emissions according to emission standard Euro 6d, seats in the cab: double passenger seat, maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle/rear axle Nodez D Hcnopfx Ab Usdb Palfinger tail lift, 1000 KG Cargo area interior: L 6.20 m W 2.46 m H 2.51 m Payload: 2600 KG New TÜV (technical inspection) and emission test available for an extra charge Financing possible

Condition: used, This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working condition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors Nedpoxx Aqyjfx Ab Ujdb On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3) Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift:

Condition: used, This listing is for a Qiagen PyroMark Q24 Advanced Sequencer For advanced methylation and mutation quantification in long sequence runs using Pyrosequencing Advanced technology, software, and chemistry for long sequence runs Quantitative methylation analysis at consecutive CpG or CpN sites Improved quantification of sequence variations at any sequence position Easy and improved base calling functionality Assay versatility on the same instrument and in the same run PyroMark Q24 Advanced has improved Pyrosequencing technology to provide even better real-time sequence-based detection and quantification than before. PyroMark Q24 Advanced features advanced technology, software, and chemistry, and is highly suited for analyzing any kind of sequence variation, particularly DNA methylation at CpG or CpN sites, complex mutations, or for de novo sequencing applications such as microbial typing. Can be refurbished on request, refurbishment not included in price. Nedpexzh Suefx Ab Uedb

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Nsdpfx Abey Ed S Io Uedb Hörbiger laser gas system 2 CCD cameras Teka extraction unit ECO-Cube

Condition: used, CFS CombiGrind 2000/250 grinder-mixer Capacity: 2000 l Nsdoy Alwgjpfx Ab Usdb Throat diameter: 250 mm Power: 75 kW Electrical supply: 400 V 50 Hz Dimensions: 3200 mm x 1900 mm x 2800 mm Equipped with an infrared MultiTrack analyzer. It analyzes fat, protein, and water content in meat.

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data - Construction: Stainless steel frame for hygienic industrial use - HMI: Integrated touchscreen for operation, calibration, and product changeover - Electrical Data - Power supply: AC 230 V, single phase - Current: 11.0 A - Frequency: 50 / 60 Hz - Inspection Function - Detection of foreign bodies: - Metal - Glass - Stones - High-density plastics - Additional capabilities: - Product integrity verification - Detection of missing components - Density-based inspection Ndedpfjyzc D Ujx Ab Usb