Used Intermac Busetti F Serie for sale (35,769)

Condition: used, empty load weight: 5,960 kg, maximum load weight: 30,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 10/2025, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit. Steel body, 3 axles, SAF axles, air suspension, first axle liftable, ABS (Anti-lock Braking System), catwalk, tailgate, foldable underrun protection, support legs. Body: Hardox body approx. 24/26m³, 10 units available! 3x 9t SAF axles, drum brakes, 5mm Hardox floor, 4mm side walls, tires 50-80%. All information subject to change, as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, changes, prior sale, and errors excepted! Nedpfx Abjw Ht Tde Ujwl

Condition: used, empty load weight: 5,960 kg, maximum load weight: 30,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 11/2025, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit. Steel body, 3 axles, SAF axles, air suspension, first axle liftable, ABS (Anti-lock Braking System), catwalk, tailgate, foldable underrun protection, support legs. Body: Hardox body approx. 24/26m³, 10 units available! 3x 9t SAF axles, drum brakes, 5mm Hardox floor, 4mm side walls, tires 50-80%. All information subject to change, as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, changes, prior sale, and errors excepted! Nwedpfx Aew Ht Tkeb Uol

Condition: used, empty load weight: 5,960 kg, maximum load weight: 30,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 06/2026, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit. Steel body, 3 axles, SAF axles, air suspension, first axle liftable, ABS (Anti-lock Braking System), catwalk, tailgate, foldable underrun protection, support legs. Body: Hardox body approx. 24/26m³, 10 units available! 3x 9t SAF axles, drum brakes, 5mm Hardox floor, 4mm side walls, tires 50-80%. All information subject to change, as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, changes, prior sale, and errors excepted! Nwodpfx Aew Ht Sajb Ujl

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 8,000 h, machine/vehicle number: 8259211467, control type: CNC control, degree of automation: automatic, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS6000U, laser hours: 8,000 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 400 mm, pipe length (max.): 6,000 mm, table length: 3,060 mm, table width: 1,530 mm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, positioning speed: 140 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 4 kW (5.44 HP), input voltage: 380 V, total length: 12,635 mm, total width: 7,905 mm, total height: 2,277 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, - Cutting head: Precitec Procutter 2.0 F150 TUBE CUTTING FUNCTION - Max diameter of tube to be cut (D): 30 - 400 mm - Max square tube: 250 x 250 mm - Cutting range of profiles (length): 3000 mm - Max length of tube to be cut: a) Round tube Dmax = 115 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) b) Square tube 30 x 40 up to 80 x 80 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) c) For larger tubes and profiles, max length is 3000 mm - Positioning accuracy of tube/profile cutting: +/- 0.5 mm per 1000 mm. This value is given for the first 1000 mm. Further accuracy depends on the straightness and precision of the tube/profile. CNC and Software coming with the machine: - CNC control: SIEMENS SINUMERIK 840D - LANTEK Expert Cut-Plus: 1 license (recommended to update) - 2D file import. Dwg and dxf - CSV file import (Lantek format and data must be followed)Warehouse module shows sheet residues and stock levelsPlugin for SolidWorks and Solid Edge - LANTEK Flex3d TUBES: 1 license (recommended to update) Nodpfjy Naypjx Ab Ujwl - 3D importCSV file import (Lantek format and data must be followed) OTHER OPTIONS - Automatic nozzle cleaning and calibration - Exhaust gas filter - Central lubrication - Motorized scrap conveyor under the working table - Work zone lighting - Remote management for factory technical support machine is available for immediate delivery. The buyer has the right to ask questions and come over to check the machine. Later claims will not be considered. Dismantling of the machine, packaging for transport, loading into a container/truck - not included in the machine price.

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Note: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the cab! • Manual transmission • Differential lock • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! = More information = Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable) Nwedpfx Abjwmpcne Uel

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Nedsxx Tfzopfx Ab Uewl Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. The machine is available for inspection and testing; it is live. Please contact us with any questions. Nedpev Tnfiofx Ab Ujwl

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, KUKA KR200 comp robot, Series 2000, with a 4-meter reach Nodpozly Rksfx Ab Uewl Controller: KRC2ed05 Number of axes: 7 Max. payload: 200 kg Max. working range: 2400 mm Year of manufacture: 2009 Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams. Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: Nsdpozhrduofx Ab Ujwl - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2909535010029, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm - prepared for automation - IKZ 40 bar _____ Basic machine G350 access-SERIE Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³ Work area door, automatic, for manual and automatic loading/unloading Stainless-steel internal work area enclosure Fluid cabinet doors Nwjdsx Ewfzepfx Ab Uel SIEMENS SIEMENS SINUMERIK ONE Swivel axis calibration GSC Advanced connection of an automation system - standard interface version 1.7 (GROB) Technology package SINUMERIK MDynamics - milling (SIEMENS) Rotary table with pallet clamping system GROB (B-axis, 5-axes) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnostics GSD Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG, BLUM-NOVOTEST Pallet 400 x 400 mm, T-slots, without pallet changer hook Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Compressed air cleaner bar for safety screen in work area door Machine status light, 3-colored Machine accuracy package 1 for a machining center of the access series Radio touch probe RMP400 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Year of construction: 2016, condition: used, Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and Air Gap System (AGS): die-cutting system, magnetic cylinder, air-gap adjustment system, semi-rotary and fully rotary gearless die-cutting system, printing plate/die plate thickness range: 0.2-2mm, Image Distortion System (IDS), 3) Air Gap System (AGS), 4) outfeed unit, web control, complete servo motor control of the material web, slitting unit, 10 pivoting razor blades with lateral adjustment, additionally 8 knife/counter-knife cutting groups for longitudinal slitting, rewinding shafts, first rewinding shaft, independent servo-driven pneumatic 76mm expansion shaft, for rolls up to 800mm or 150kg, automatic web tension control, direction of rotation: clockwise/counterclockwise, with documentation. An on-site inspection is possible. Nwsdpszy Rv Tefx Ab Uol

Condition: used, functionality: fully functional, NIKKEN CNC rotary table CNC 320V, Series 400V - Faceplate Ø320 mm - Spindle bore Ø80 mm Nsdeymyh Tspfx Ab Ujwl - Center height 230 mm - Siemens motor

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Nwjdpfx Aszz Rz Ssb Uol Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling

Condition: used, Year of construction: 2024, Integrated SIAD Industrial Hydrogen Compression System (249 kW) - Manufacturer: SIAD Macchine Impianti (compressor), SAEP & FLOVEX (exchangers), Capelli & Cie (vessels). - Type: Turnkey reciprocating hydrogen compressor skid designed for ATEX Zone 2 hazardous areas. - Applications: Hydrogen gas (H2) boosting for chemical processing, mobility, and energy storage. Technical Specifications - SIAD HMS4-2 Compressor (2024): 249 kW | 384 kg/h | 0.1 to 3.5 bar(g) | ATEX Zone 2 - IIC - T3. - SAEP Gas Exchanger R-36050 (2024): 248 L volume | 10 bar(g) | -20 to +200 °C. - FLOVEX Oil Cooler (2024): BEM/OTT 403.4-13-2 | ASME VIII Div.1 | 10 bar(g). - Capelli Main Buffer Vessel (2024): 10,250 L | P265GH Carbon Steel | -1 to +0.5 bar(g) | 2,310 kg. - Capelli Condensate Tank (2024): 1,140 L | 316L Stainless Steel (X2CrNiMo17-12-2) | 730 kg. Working Principle & Highlights Low-pressure hydrogen (0.1 bar) is boosted to 3.5 bar(g) at 384 kg/h by the 249 kW SIAD unit. Thermal management is handled by FLOVEX and SAEP exchangers, while the 10,250 L Capelli tank absorbs system pressure surges. - ATEX Compliant: Certified for hazardous Zone 2 gas group IIC environments. - Robust Metallurgy: Built with P265GH steel and 316L stainless steel for H2 service durability. Nedpfxjztw Upe Ab Uewl - Modular Skid: Plug-and-play setup combining compression, cooling, and buffer storage.

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm Nwodpfxjwbv Ers Ab Uol - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Nsdpfszi S E Uex Ab Uswl Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, 3 units available HB-Therm Series 5 Temperature control unit for water, max. 140°C Nwsdpfx Ajyzqy Djb Usl Pump: 160 l/min, 7 bar Heating: 16 kW Cooling: 60 kW (indirectly cooled via plate heat exchanger) Interface: Digital ZD and CAN ZC Mold emptying via compressed air ZG Units have been serviced and inspected. Pump performance over 90% Very good condition

Condition: used, Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). Nwjdez Afctjpfx Ab Ujl If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. Nwedpfx Aboz D Tb Rj Uol - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Nwsdpfjykr Rzox Ab Usl

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, I am offering this ready-to-use DMS digital card cutter, Series 3, with extended stacking table, card cutting machine/multi-finishing capabilities, perforating and scoring functions, manufactured in 2024. Nedpjy Ufnpsfx Ab Ujwl Original price: €12,900. Counter reading: only 5,900 sheets. Sheet stack feeder with compressed air and double sheet detection up to format 33x67 cm. Programmable cuts. Programmable scoring or perforation. 2 double knives with 8mm strip cut, 2 side knives. Fast knife adjustment system, only 1 minute setup time. Long stacking table with motorized automatic shingle delivery. Selling price: €6,720 + VAT, collection only. Location: 63450 Hanau (near Frankfurt/Main), Germany. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Travel in X-axis: 350 mm Nwedpfxjzzyhne Ab Uol Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Complete automatic URBAN welding and cleaning line for PVC windows and doors profiles. System consisting of 2 paralel welding machines: 1 four-head welding units of AKS 6410 27/25, 1 six-head welding units of AKS 6610 27/25, 1 automatic unloading and transfer bench TBA-F 26/28-TE 9M, 2 automatic transport bench TBA-F 26/28H to 1 automatic four-head cleaning unit SV 800/2.5M and 1 final TBA bench. Set of jaws for Komerling Profine profiles. Sold due to company closure. Nedpfx Absyundrs Uswl

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. Nwodpfx Ajzwdameb Usl The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank Nwjdpfx Absz Dtxco Uel - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg