Used Laboklav 25B Autoclave for sale (160)

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Rodpfx Akow Tyk Ijweu

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: Rodpfx Aksv Si Szoweu 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, High Performance, High Accuracy pH & ORP. The InPro 3253i SG/120 is a digital, pre-pressurized, low maintenance ISM pH & ORP sensor combined with a temperature sensor for in-line measurement in demanding applications. The 120 mm version is optimal for short installation lengths. Optimized for Steam Sterilization The steam-sterilizable pH glass membrane of the InPro 3253i SG/120 makes it optimal for processes where sterilization or autoclaving are required. Low Maintenance and Easy-to-Use This digital pH sensor has Intelligent Sensor Management (ISM) technology, offering predictive diagnostics to reduce maintenance and calibration. Rsdpfjh Rulhox Akwou Sterilizable and Autoclavable This sensor provides fast and precise pH and ORP measurement, even after repeated autoclaving and sterilization cycles.

Condition: new, functionality: fully functional, Mettler Toledo Rainin Quickflow 4l Aspirator. Rainin QuickFlow Portable Aspirator. Ergonomic handle; 3 adapters fit Pasteur pipette, 1 or 8 universal-fit pipette tips. 4-liter bottle; quick-snap connectors, tubing. Variable speed. Non-contact liquid level sensor. Autoclavable, fits inside hood. Improved ergonomics: Switching to continuous mode on the QuickFlow handle eliminates the need to repeatedly press and hold the aspiration button. Guaranteed safety: The robust non-contact liquid level sensor prevents overflow. Simple, self-sealing snap connectors keep any contamination inside the bottle. Workflow flexibility: Single channel, 8-channel and glass Pasteur pipette adapters. From flasks to plates to tubes, QuickFlow adapts to your applications. Good working condition. Please check out our other listings as well. Rjdpfjua Hatex Akwou

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. Rsdsymxqaspfx Akwsu The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2019, condition: ready for operation (used), Used for autoclave sterilisation, an on-site inspection is possible. Rsdeq Rfl Nopfx Akweu

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Rodpfx Akjxcvzaowju Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surfaces Rodpfx Aexcgihskweu Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Rodoxfvh Sjpfx Akweu

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Rodpfxsrzbfco Akwou

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Technical Specifications: Material: VALOX resin (external) and silicone (internal) Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min Rsdpfjxxz T Hsx Akwsu

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: PM150, Function: Rodpfjt Ix T Asx Akweu The autoclave basket is inserted into the machine by the operator and then locked. The autoclave cages are loaded or unloaded layer by layer via a scissor lift system. The modular design allows the combination of manual, semi-automatic and fully automatic systems. Operation is via two-hand control. Loading and unloading systems can be combined with the following components: -Feed belt and turntable -Clock tape magnetic plate -Transfer plate Features: All machines are adapted to the respective requirements. Feel free to contact us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Korimat KA-240 Autoclave Pressure Cooker 230V Gas-operated V2A 21kW 240L Built in 2009 2.5 bar The system is fully functional ready for immediate use. Rodpfx Aksv Tyu Ajwju Accessories: 3-part basket Further information available upon request! Cash or prepayment! Sale to businesses only. No guarantee or warranty.

Condition: used, This listing is for a Thermo Scientific High capacity Dryer A82100126 Digital controller facilitates accurate and constant temperature control from 40° to 90°C. Polished stainless steel drying chamber includes an autoclavable drip tray. Includes air intake with removable filters and easy-to-clean epoxy-coated external finish. Listing: Thermo Scientific High Capacity Dryer A82100126 Rsdpfxsxzht So Akwou Quantity: 1.0

Condition: used, This listing is for 1 of 2 Quattro Fluid SystemFlow 1000S Rjdpfx Akexhfp Rewju These units is in full working condition and is ready for immediate use Overview & Application The Quattroflow 1000 S is a quaternary (four‑piston) diaphragm positive‑displacement pump—engineered for gentle, sterile handling of shear‑sensitive fluids such as proteins, vaccines, cell suspensions, and other biopharmaceutical or food-grade products. Its design features—like seal‑less operation, low shear, low pulsation, and dry‑run capability—make it ideal for critical applications including: Filtration systems: Tangential‑flow filtration (TFF), recirculation pumps, filter cartridges Chromatography: Gradient mixing and feed pumps Centrifuge feeding and homogenization Aseptic filling lines and other sensitive processing tasks Commonly processed media include albumin, IgG antibodies, enzymes, vaccines, cell and virus suspensions, dairy products, and cosmetic or polymeric solutions. Technical Specifications Here’s what’s known about its performance and build: Flow rate: Continuously variable between ~25 to 1000 L/h (at atmospheric pressure); around 750 L/h at 6 bar (depending on configuration) Max Pressure: Up to 6 bar, with high‑pressure variants available upon request Drive mechanism: Four‑piston diaphragm setup actuated by an eccentric shaft; standard variant uses a 5° eccentric shaft reaching up to 1,800 rpm Material & Construction: Pump head: Stainless steel grades 1.4435 or 1.4539, optional alternatives (like PEEK) available Membranes: Santoprene (diaphragm), EPDM (valve membranes) Priming and Pumping Features: Self‑priming, dry‑run capable Four directional porting—pump orientation flexible No shaft seals or wetted rotating parts, minimizing wear and product heating Internal volume (filling volume): Approx 35 mL; designed to minimize dead volume and aid product recovery Connections: Standard ¾″ TC (Tri‑Clamp) sanitary ferrule; other flange types available Dimensions & Weight: Pump: 523 × 155 × 212 mm, ~23 kg Control unit (frequency inverter): 350 × 155 × 212 mm, ~6 kg Electrical: 230 V AC (50 Hz) via a control box with 6.3 A fuse; motor IP54, control box IP53 Key Advantages This model offers several standout benefits: Gentle, high‑integrity fluid handling—ideal for fragile biologics due to low shear and pulsation Contamination-free design—no mechanical seals, minimal abrasion Robust operation—powerful 370 W motor, simplified maintenance with fewer parts Aseptic and sterile process readiness—autoclavable, self‑draining, hygienic construction Installation adaptability—four flow directions, small footprint, flexible hookups

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Rsdpfxoxx Avps Akwju Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Redpfx Aoxxz Iwjkwju Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Rodpfxexxz I Ro Akwou Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release. The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup. Rjdpfxsxxycys Akwsu

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Rjdpjxhd Ixofx Akwju Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-300 12 Chanel Pipetter (Button Colour-code White The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort Redpfxexv Dtqo Akwju RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime. Redpfx Akexxy S Ujwou

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: Rodpfxexv Dv Es Akwsu - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Year of construction: 2014, condition: used, This listing is for a Mueller PyroPure P4003 Pure Steam Condensing System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's- Product Overview: The Mueller P4003 is a high-capacity pure steam condensing system, part of the trusted PyroPure series. Designed for pharmaceutical manufacturing, this system produces pyrogen-free and endotoxin-free water-for-injection (WFI) by condensing pure steam. Built to meet or exceed U.S. Pharmacopoeia (USP) standards for WFI, as well as CE marked and FDA compliant with 3.1B material certification. It is a versatile solution for facilities requiring both pure steam and WFI quality distillate. Its robust design and advanced features ensure reliable operation, compliance, and minimal maintenance. Key Specifications: Model Number: P4003 Capacity: 100 gallons per hour or 379 litres per hour of WFI-quality distillate. Pure Steam Inlet: 807 pounds per hour or 366 kilograms per hour. Coolant Requirement: 978 gallons per hour or 3702 litres per hour. Pure Steam Output Compliance: Pyrogen-free and endotoxin-free, meeting USP WFI standards. Core Features Rodpfsxv Agcox Akweu High-Quality Output: Produces pyrogen-free steam and WFI-quality distillate, ideal for pharmaceutical-grade applications. Utilizes a tangential nozzle design for optimal impurity separation in the pure steam generator. Efficient Design: Fully drainable components eliminate contamination risks and ensure clean operation. Electro-polished 316/316L stainless steel with a maximum surface roughness of 20 Ra for all product contact areas. USP Class VI-certified elastomers for enhanced safety and regulatory compliance. Ease of Maintenance: Removable tube bundle in the condenser allows for easy cleaning and inspection of critical surfaces. Requires only 24 inches of clearance on all sides for service and maintenance. Minimal instrumentation with just one control loop simplifies operation and reduces potential downtime. Installation Flexibility: Can be integrated with a PyroPure pure steam generator for dual production of pure steam and WFI. Optional stand-alone design for remote installation at the point of use, adding versatility to your setup. Applications: Pharmaceutical Manufacturing: Sterile environments, autoclave processes, and critical cleaning procedures. Biotechnology: Providing WFI for sensitive biological processes. Healthcare: Humidification and sterilization in clean rooms or hospital sterilization units.

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-200 12 Chanel Pipetter (Button Colour-code Green) The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–200 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Redpfsxv Diljx Akwou Precision: ≤0.3% (~0.6 µL)