Used Leitz Profile Milling Cutters for sale (16,275)

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Lhedpfx Abszbb Rroysl

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 Ljdpfxjztl Sce Abyohl EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Lhodowgmyqspfx Abyol Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. It is in used condition but fully functional. Year of manufacture: 1988, Machine No. 032-230 Including control cabinet! Comes with three complete sets of Leitz tools: - IV68 reversible cutting tool with standard profile - IV68 cornice profile for historic buildings - Tools for wood and aluminum windows The following tools are available (as shown in the pictures): 1x straight cutter, vertical and 1x horizontal 1x straight frame cutter, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile cutter, horizontal 1x tenon cutter, vertical 7 straight cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping Lodpfx Abszx Emdsyehl 1x frame milling head, aluminum, for clipping 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any warranty. Price upon request. Private sale. Old, used machine. No warranty, return, or guarantee claims.

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Lhedpjxbn A Tsfx Abyel Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -1x milling cutter: Ø 52/170 mm -Diameter: 22 mm -Weight: 2 kg Lhedpfxeb A Srne Abysl

Condition: used, Year of construction: 2017, operating hours: 20,968 h, functionality: fully functional, Profiling machining center with feed magazine for 12 profiles Automatically adjustable profile supports/guides 13 milling tools: 3 below; 1 pivoting, 3 in front, 3 behind, 4 above Saw blade 750 mm, pivoting from 30° to 150° End machining with manual tool change Outfeed table Automatic printer Manual printer Lodpfsz D S U Asx Abyohl Available: October/November 2027

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera System AKI System Cutting accuracy: 0.1 mm Lhodpfxey Tk R Hj Abyol Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Lodpfxezwudcs Abyjhl Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: excellent (used), functionality: fully functional, Radius and round arch cutter set Field of application: Solid wood, wood panel materials, solid surface materials and much more. Consisting of: 1. Scheer HM 16 hand router Lsdpfsuy T Exox Abyohl Power 1800 W / 18000 rpm 220 V Tool: Carbide insert router 16 mm Cutting length 50 mm Storage case for machine and tools 2nd radius milling device ¼ circle from R 30 - 160 mm 3. radius milling device ¼ circle from R 110 - 360 mm 4. round arc milling device with radius ruler For radii from 300 - 5500 mm For the production of round, stitch and basket arches Machine and device fully functional and cleaned

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, Year 2003 Machine is fully controlled by PLC, almost all settings can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, a second set of cutters is available, various indexable inserts are available. Maximum panel thickness approx. 48 mm, edge banding from 0.3 - 15 mm possible. Chain conveyor renewed approx. 10 years ago. Spray system for separating and cleaning agents, controlled by the application. -Jointing fence, motor-driven, program-controlled. -Jointing cutters 1961, 2 x 2.0 kW. -Gluing system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. -Miter saws 1918, bevel cut adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel). -Profile cutting blade 2 mm 1929, pneumatically timed. -Corner copying unit 1983, carbide tipped, with adjustment on the control panel, functional, but needs further fine-tuning. -Straight cutting blade 1964. -Swivel unit, controlled by the application. Includes all operating manuals, documentation of the operating points digitally and in printed form by Holzher technicians. A set of DIA jointing cutters is also included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, Year 1995 Mounted on the machine with connection to the pressure bridge. Easily adjustable from the front control panel, with a rotating device for parts. Adjusted to the feed rate, sensors still available from HOMAG. -Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. -Sale only to commercial enterprises, machine is currently powered and in operation. Lhedsz Dxh Nepfx Abyjl Price is negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Lhedpfszx Szuex Abysl Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Lsdpfxexr N Rmj Abyohl Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, rotor diameter: 600 mm, rotor width: 1,000 mm, year of last overhaul: 2026, Shredding mill, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Rotor diameter: 600 mm Year of manufacture 2015, fully overhauled with - new rotor - new hopper - new base frame Examples of applications: Shredding of solid lumps, start-up blocks, profiles, beverage crates, boxes, vegetable crates, etc. Lhodsz Ak A Ejpfx Abyel

Year of construction: 2005, condition: excellent (used), functionality: fully functional, -Maximum milling cutter diameter: 280 mm -Milling cutter arbor bore: 40 mm -Feed: manual -Power: 2.5 kW at 400 V/50 Hz -Milling spindle speed: 2,800 rpm -Compressed air connection: 7 bar -Air consumption: 10 liters per working cycle, with minimum quantity lubrication: 20 liters -Length: 1,540 mm, depth: 905 mm, height: 1,200 mm, weight: 248 kg Ljdpfjyyma Rjx Abyshl

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the stable milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: - Working width: approx. 1,000 mm Lhedpoztvxgofx Abyel - Spindle diameter: 40 mm - Feed: Pneumatic

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Lhsdpewrcwpefx Abysl Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 50 mm -Recording: SK50 -Weight: 4 kg Ledpfjb A Npwex Abyohl

Condition: used, Year of construction: 2024, Ficep Excalibur 1201 EX Sectional Steel CNC Milling & Drilling Line. Serial No. 38008 (2024),18m Fixed Extension (12m Long Section), Profile Size Min/Max 50/1200mm, 9 Position ATC, Max Drilling Diameter 40mm, Spindle Power 19kW, HSK63 Spindle Taper, Max Spindle Speed 5000rpm, Sub-Spindle Stroke 200mm, X-Axis Positioning, Clamping, Drilling Unit, Light Guard Surrounds. Country of Origin: Italy This lot has been professionally dismantled. Lhedpfx Absz Aryljysl Location: These lots are located in Wolverhampton, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 20 rpm, For sale: Aciera F4 milling machine – ISO 30 – very complete with many accessories For sale: an Aciera F4 universal milling machine, equipped with an ISO 30 tool holder and featuring a very extensive range of accessories. The Aciera F4 is a high-quality Swiss precision milling machine, known for its robust construction, accuracy and versatility. This type of machine is very popular with toolmakers, precision workshops and enthusiasts of classic quality machines. Thanks to its universal design, the F4 is suitable for a large number of milling, drilling and precision machining operations. Technical specifications: • Brand: Aciera • Type: F4 • Design: Universal milling machine • Spindle taper: ISO 30 • X-axis travel: 400 mm • Y-axis travel: 180 mm • Z-axis travel: 400 mm • Solid and precise Swiss construction • Suitable for both horizontal and vertical milling, depending on the head and accessories used • Highly versatile Very extensive accessories The machine comes with a very large number of accessories, including various ISO 30 tool holders and other original and matching accessories. Including: • Dividing head • Various dividing plates • Rotary table • Machine vise • Various ISO 30 milling chucks • Various collet chucks and collets • Milling arbors and holders • Various milling cutters and cutting tools • Clamping tools • Drawbars • Clamping devices Lhsdpfxezxgyfo Abyol • Parallel blocks and clamping materials • Various original and matching machine attachments • And much more The large number of accessories makes this a particularly complete machine that can be used immediately in a wide range of applications. The extensive collection of holders, collets, dividing equipment and clamping tools alone represents a significant value. The Aciera F4 is not a light hobby milling machine, but a real precision and toolmaking machine. With a working area of 400 mm in X, 180 mm in Y and 400 mm in Z, the ISO 30 taper and the extensive accessories, this is a particularly versatile machine. A great opportunity to purchase a very complete Aciera F4 with ISO 30 taper and an exceptionally large number of accessories. Condition: used Location: Emmeloord Asking price: € 6,850 VAT: excluding VAT Inspection and demonstration are possible by appointment. If you are seriously interested or would like more information about the machine and the available accessories, please contact us.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: Lhsdpfx Abstq Takoyjl - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: used, 1x steel cabinet with tool holders Tool holders with milling cutters and drills 2x Allmatic vises 4x substructure for Allmatic vises Various milling cutters Various solid drills Various disc milling cutters 1x angle milling head with holder for Kessler spindle 2x large prism holders 2x small prism holders made of aluminum 2x mandrels for clamping pipes with R 235mm 2x mandrels for clamping pipes with R 271.5mm 4x clamping blocks for clamping plates or similar Lhjdpfx Asz Ar Ehebyjl This package offers everything needed to fully equip a milling machine and start production immediately.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2170112, spindle speed (max.): 1,650 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,000 mm, For sale is a Kärcher ROBO 30 pipe drilling and milling machine, manufactured in 2012. Motor power: 1.85 kW Compressed air: 6 bar The ROBO 30 is designed for the quick and dimensionally accurate machining of pipes, flat material, and profiles. The self-centering clamping device allows different workpieces to be quickly and precisely clamped and machined. The machine enables angular drilling and milling operations and is particularly suitable for the production of railings, handrails, and similar structures. Lhjdpfxezyntpj Abyjl Inspection is possible by appointment.

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Year of commissioning: 2025 Condition: Demo machine — under 200 production hours, virtually factory new Type: CNC plasma PIPE profiling machine (6-axis) - no beams Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a 6-axis CNC pipe cutting machine capable of processing round pipes up to 914 mm in diameter and 12,000 mm in length, with wall thicknesses ranging from 3 to 50 mm. The machine was installed in 2025 in Belgium and has logged fewer than 200 production hours — making it virtually a new machine at a pre-owned price. The 6th CNC axis maintains a constant torch-to-material distance, ensuring flawless weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head allows torch adjustment of ±60° and 380° rotation for precise contour cutting on any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor transport system on rail — Two-point fume extraction (at cutting head and through chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — E-cabinet with CNC unit, PLC, IP54 enclosure, power buffer — Industrial PC with 22" touchscreen and mobile control panel — All safety devices (CE certified per 2006/42/CE and 2004/108/CE) — Full technical documentation, operator manuals, installation drawings Key specifications: — Clamping range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel range: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation footprint: 7.0 × 4.0 × 4.0 m Lhodpfsy H I Trjx Abyel — Machine weight: 6,000 kg Please note: COROBS machine control software licenses are not included and must be purchased separately from Voortman. Voortman can provide reinstallation, commissioning, operator training, and ongoing maintenance contracts at the buyer's facility. Why buy this machine? A new MO Compact 900 currently costs EUR 350,000+ and has a lead time of 6–12 months. This unit offers the same capability with immediate availability and significant savings. Full OEM support from Voortman is available for the buyer. Location: Belgium (available for inspection by appointment) Delivery: Ex-works. Dismantling and transport by agreement. For questions or further information, please send us a message or call us.

Condition: excellent (used), BRANDT optimat kdf340 edger Lhjdpsz Du Hnjfx Abyel Pre-milling cutters Edge banding with roller application Pneumatic pre-trimming guillotine Press rollers Trimming cutters R1-R2 top-bottom milling unit Profile edging unit Flat edging unit Max. element height: 45 mm Max. edge band thickness (reel): 3 mm Feed rate: 10 m/min Machine length: 350 cm Machine inspected, in very good condition, ready for operation.