Used Miesing Exhaust Flue for sale (1,870)

Condition: good (used), Fan, fan, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Rosenberg, axial fan axial fan suction fan -Type: ... -Power: 0.52 kW / 1340 rpm Podpfsrg Iu Njx Antept -Fan: Ø 500 mm -Transport dimensions: 950/455/H740 mm -Weight: 21 kg/pc.

Condition: good (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 310-4-4 -Speed: 1330/1050 rpm -Power: 0.12 kW -Protection class: IP 44 Podeqpl Ruopfx Antjpt -Dimensions: Ø 310 x 165 mm -Weight: 5.5kg -Quantity: 1 piece available

Condition: new, Nominal capacity: 400 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx.: 35 kW Electrical Rating: 1.4 kW Electrical Connection: 230V 50Hz (1 phase) Electrical protection: 16 A Dimensions: Length: 910 mm Width: 960 mm Pedjdix Rcepfx Antept Height: 1 850 mm Weight (heating circuit drained): 260 kg Weight (heating circuit filled): 360 kg Heating oil consumption approx.: 3,5 litres/h Max. exhaust temperature: 180°C Noise level (LW, A): 83 dB Flue gas connection: ø 150mm

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Ppjdjwb A Hiopfx Antjt Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Pjdjxwhw Aepfx Antept Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2024, condition: new, Technical data of the furnace Ppedpfjpm Ex Hjx Antjt nominal heat output: 30,00 kW maximum heat output: 35,00 kW / approx. 400 m2 complete with: axial fan with speed: 1380 rpm and capacity: 4650 m3/h complete with: blower control unit SCL-1515 innovative design of the air jacket that completely surrounds the combustion chamber for maximum efficiency indestructible firebox, made entirely of certified boiler plate p265gh and 16M06 #6mm thick Large flue that reduces fuel consumption by up to 30%. Energy efficiency class: A energy efficiency index: 110 net weight: 260 kg gross weight: 290 kg Grille: 1000 x 250 mm coating with certified heat-resistant paint, which protects against corrosion and gives an aesthetic appearance solid construction powerful combustion chamber 100 x 55cm! large loading door instruction manual efficiency: 72,00% CO emission at 13% O2: 1.20m Fuel type: recommended seasoned hardwood with moisture content ≤20%* mg/Nm3, briquettes, coal only up to 10%. Dimensions: External dimensions: overall width: 650mm x overall depth: 1350mm x overall height: 920mm. dimensions of the fireplace: width: 550mm x length: 1000mm x height: 450mm Dimensions of the upper door (3 and 4 mm sheet metal): Width: 410mm x Height: 340mm Dimensions of the lower door (3 and 4 mm sheet metal): Width: 410 mm x Height: 150mm Dimensions of the upper loading opening: width: 320mm x height: 320mm Dimensions of the lower opening: width: 320 mm x height: 130 mm dimensions of the grille: width: 250mm x depth: 1000mm Diameter of the hot air outlet: Ø 150mm diameter of the exhaust outlet: Ø 150mm Height of the feet: 140 mm

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Pedpfx Anjx Ihg Ietjpt Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Podpfx Aex Ihiijntept Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 315/80R22.5 R, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 160 l, color: white, emission class: euro5, Year of construction: 2023, Equipment: fridge, spoiler, = Additional options and accessories = - Immobiliser - Spare wheel - Spoilers - Sun visor = Remarks = Cabin type: Active Space Country of origin: Spain Displacement: 11,000cc Gcw: 44 Tons Dimension: 6,250 x 2,550 x 3,783 Ground clearance: 217 mm Steering: LH Construction: Tractor Head Gearbox type: TX-12M LIMITATION ON SL INFOTAINMENT ECOSWITCH PORTABLE SMOKING KIT FMS DATA INTERFACE AUTO A/C+LER JOST FIFTH WHEEL 220AH H PERF REVERSE BUZZER L-3-P NET U-COMF ROCKING MODE FULL LED HEADLAMPS 7+7 PIN TRAILER PLUG FRONT PARKING BRAKE WITH BUNK CURTAINS 120A SMART ALTERNAT INDEP. C/E HEATER 6k STD GVW EQUIPMENT STANDARD AIR SUSP. SETTING TRAILER COUPL. - 2 LINE BRAKES STEEL WHEELS GREY IC444 CHASSIS SPEED LIMITER 90 KM/H DRIVE T. 315/80R22,5 SIDE MARKER LIGHT FRONT CORNER FINS JACK T INF HOSE PRES GAUG CAB AIR SUSPENSION UREA TANK 50 LITRES STANDARD AIRTANK PLATING STANDARD GEAR MODE 08329 SENZA ENG ID CUTOFF STD GREY PLAST. PART AS HIGH ROOF CAB FABRIC AIR SUSP. HEATED DRIVER LOWER EXHAUST PIPE STD SETTING C11/C13 FRONT ANTI-ROLL BAR Ppjdpfoy Tymqjx Antst FRONT UNDERRUN PROTECTION REAR ANTI-ROLL BAR 12TX 2420 TD GEARBOX HILL HOLDER REAR OVERHANG 1047,5 LOADS 7500-13000Kgs MECHANICAL BATTERY SWITCH 4-DIN UPPER SHELF FABRIC STA. 2 WAY ADJ. PASS ESP DIGITAL AXLE WEIGHT INDICATION AEBS Compliant FOGLIGHT CORNER+BEND MPH/KPH SPEEDOMETER WARNING TRIANGLE SUB-ARTIC PACK -30 ANTI-SIPHON 2 TANK AIR INTAKE DUSTY ENV FIRE EXTINGUISHER PROVISION HEATED ELECTRIC REAR MIRRORS High Efficiency A-PI RUSSIAN OMOLOGATION PLATE 5th W H=150 MP=50mm ROOF INSUL SUB-ARTIC BATTERY CHARGE LAMIN FUEL TANK 1160L ALUMINUM 1 UND FLOOR STORAGE ENGINE PLATE REAR AXLE RATIO 2.85 REAR AIR SUSPENSION ELECTRIC ROOF HATCH STANDARD CAB TRIM SOFT TOUCH FOAM STEERING WHEEL TRATTAM. PROT. STD VIN CODE CHECK DIGIT CURTAINS ON DOOR WINDOWS FUEL TANK HEATER WITHOUT STICK79239 (IT03-EN) FIRST AID KIT 352CC AIR COMPRESSOR STEEL AIR TANKS APU FREE DISCHARGE HORIZ BATT SIDE FRAM MANUAL CAB TILT STANDARD REVERSE VERTICAL AIR FILTER ENG RPM = 1900 REV/ 5th W EC POSI06139 FRONT PARABOLIC SUSP REAR DAMPERS FILTER HP TRA/HEATED ECO-ROLL ELECTRIC HORN BULB REAR LIGHTS EMISSION EURO V W/O AMBIENCE LIGHTIN STANDARD CATWALK Radice VIN WJM = More information = Tyre size: 315/80R22.5 R Number of cylinders: 6

Condition: new, power: 206 kW (280.08 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 180 l, emission class: euro3, Year of construction: 2026, Equipment: ABS, air conditioning, electric window regulation, trailer coupling, = Additional options and accessories = - Seat-belts - Spare wheel - Tinted windows = Remarks = Cabin type: Day Cabin Country of origin: ITALY Displacement: 5,880cc Dimension: 7,470 x 2,490 x 3,070 Brakes: Drum Brakes ( Front/Rear) and exhaust brake Cab to end: 5,500 mm Steering: LH Construction: Chassis Gearbox type: ZF 6S1005 TO + PTO Gearbox 6 SP Senza Air Bag TYPE: ML 150E28WS-E3-EEW Rear Axle Type: Hub Reduction - Tandem Light Shipping Weight: 6 Ton approx Chassis Length: 5.5 meters Use: Off-road use all wheel drive Special Version: Chassis Cab Colour: 50105 - White IC 194 Ppedpfey Tymksx Antet Expansion Module PTO Pre-equipment Rear Cab Windows Rear / Front Multileaf suspension 90A Alternator Single Wheels Turbo Charged And Intercooled Rear Cab Air Filter 360cc Air Compressor Hub Reduction - Tandem Ligth Mechanical Suspensions Air Dryer Spray Suspension Manual Cab Tilt Cabina Mlc-My2015 Tetto Basso 2 Wheel Chocks Central Exhaust Pipe Front Underrun Protection Gearbox Zf 6S 1000 To Rear Axle Ratio 6.95 Loads 5700-10000 Kgs Steel Wheels Noise Reduction Ce 92/97 Mph/Kph Speedometer Speed Limiter 90Km/H Cluster Kmh And Mph Indicator Standard Toolkit 24/12V Convertor Rear & Front Multileaf suspension = More information = Number of cylinders: 6 Carrying capacity: 9.000 kg GVW: 6.000 kg

Condition: new, power: 101 kW (137.32 HP), fuel type: diesel, tire size: 7.5R/16, axle configuration: 4x2, wheelbase: 3,350 mm, fuel: diesel, gearing type: mechanical, emission class: euro2, total length: 6,030 mm, total width: 2,040 mm, total height: 2,260 mm, Year of construction: 2026, Equipment: air conditioning, electric window regulation, fog lights, = Additional options and accessories = - Alarm system = Remarks = Cabin type: Single Cab Country of origin: JAPAN Displacement: 3,900cc Dimension: 6,030 x 2,035 x 2,260 Brakes: SERVICE BRAKE : HYDRAULIC WITH VACUUM SERVO ASSISTANCE DUAL CIRCUIT PARKING BRAKE : INTERNAL EXPANDING TYPE ON PROPELLER SHAFT AT REAR OF TRANSMISSION EXHAUST BRAKE : VACCUM OPERATED BUTTERFLY VALVE TYPE Cab to end: 4,305 mm Steering: LH load capacity: Approx 5 Tons Radio AM/FM & CD player Ppedpfx Anjy Tylyotst Adjustable steering wheel Adjustable seats (driver & passenger) Spare tyre located under the chassis with winch = More information = Tyre size: 7.5R/16 Engine capacity: 3.900 cc GVW: 2.340 kg Engine type: Mitsubishi 4D34-2AT4

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = Ppedpfey Tylgjx Antot - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 4,860 mm, fuel: diesel, fuel tank capacity: 200 l, gearing type: mechanical, emission class: euro2, total length: 8,310 mm, total width: 2,260 mm, total height: 2,610 mm, Year of construction: 2026, Equipment: air conditioning, central locking, Cabin type: Single Cab Country of origin: Japan Ppedpfx Aoy Tyk Ajntjt Displacement: 7,790cc Torque: 72kg-m /1450 rpm Dimension: 8,310 x 2,260 x 2,610 Brakes: Air over hydraulic with ABS and exhaust brake Cab to end: 6,089 mm Steering: LH Construction: Chassis Reverse Warning Buzzer Factory Fitted PTO Header Tray - driver & passsenger Seating Capacity: 2+1 person Streering: Tilt & Telescopic Power Assisted = More information = Carrying capacity: 9.000 kg GVW: 4.010 kg

Condition: new, power: 96 kW (130.52 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,370 mm, fuel: diesel, fuel tank capacity: 100 l, gearing type: mechanical, emission class: euro2, total length: 5,980 mm, total width: 2,120 mm, total height: 2,250 mm, Year of construction: 2026, Equipment: air conditioning, Cabin type: Single Cabin Country of origin: JAPAN Displacement: 2,999cc Torque: 34 kg-m/ 1,600-2600 rpm Dimension: 5,985 x 2,120 x 2,255 Brakes: HYDRAULIC, DUAL CIRCUIT + DRUMS + ABS Steering: LH Construction: Chassis EXHAUST BRAKE PRE AIR CLEANER REVERSE WARNING BUZZER FUEL TANK LOCK REAR BUMPER HEADER TRAY (DRIVER & PASSENGER STEERING: RECIRCULATING BALL & NUT TYPE WITH POWER ASSIST SEATING CAPACITY: 1+2 PERSONS = More information = Number of cylinders: 4 Empty weight: 2.300 kg Carrying capacity: 4.200 kg GVW: 6.500 kg Ppjdpfx Anjy Tykpstet

Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, fuel tank capacity: 200 l, gearing type: mechanical, emission class: euro2, total length: 9,480 mm, total width: 2,320 mm, total height: 2,830 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, = Additional options and accessories = - PTO Pjdpfxjy Tyi Eo Antspt = Remarks = Country of origin: Japan Displacement: 7,790cc Torque: 72kg-m /1450 rpm Dimension: 9,475 x 2,320 x 2,825 Brakes: Full air with ABS and exhaust brake Cab to end: 7,189 mm Steering: LH Construction: Chassis Reverse Warning Buzzer Factory Fitted PTO Header Tray - driver & passsenger Body Type: Chassis Cab Steering: Tilt &Telescopic Power Assisted Seating Capacity: 2+1 person = More information = Tyre size: 295/80R22.5 Engine capacity: 7.790 cc Empty weight: 5.090 kg Carrying capacity: 13.000 kg GVW: 18.090 kg Engine type: Isuzu ect injection

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 14.00R20, axle configuration: 6x6, fuel: diesel, fuel tank capacity: 1,000 l, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,500 mm, total width: 2,600 mm, total height: 3,700 mm, Year of construction: 2026, Equipment: air conditioning, = Additional options and accessories = - 2 fuel tanks - Sun visor = Remarks = Cabin type: flat roof with single sleeping bunk Country of origin: CHINA Displacement: 12,500cc Torque: 2400/900-1400 Gcw: 100 Tons Dimension: 7,500 x 2,600 x 3,700 Brakes: Service brake: With dual-circuit compressed air brake , Parking brake: Power spring brake acting on rear wheel Steering: LH Construction: Tractor Head Podpfx Ansy Tyh Uetspt wheelbase: 3,775+1,400 mm The total volume of the fuel tank: 700+300L Air Driver Seat Electrical cab tilting Reverse Buzzer Central Locker Hydraulic Cab Suspension Electric rear view mirror Day Time Running Light Dessert Air Filter Metal Bumper Rear and Front Lamps Protection Grid Radiator Protection Oil Pan Protection Fuel Anti-Theft System Battery Anti- Theft System Extra Fuel Filter 2 Hazard warning light on top of the cabin ABS: WABCO ABS Steering Type: ZF8098 technology integral circulating ball power steering Chassis Frame: 800x300(8+7) Gears: 16 forwards & 2 reserve shifts Clutch Type: 430 diaphragm-spring type Transfer Case: ZQC 2800 Front axle: HANDE MAN 9000 kg Rear axle: HANDE MAN16000 kg*2 hub reduction axle with inter-wheel differential and different lock Rear axle ratio: 4.769 5.262 Brake system type: Drum brake Exhaust Type: Vertical exhaust Fifth wheel: JOST 90 # = More information = Tyre size: 14.00R20 Suspension: leaf suspension Number of cylinders: 6 Engine capacity: 12.500 cc GVW: 10.500 kg Engine type: Suzuki M13 Number of berths: 1 Volume first fuel tank: 700 l Volume second fuel tank: 300 l

Condition: new, power: 206 kW (280.08 HP), fuel type: diesel, tire size: 295/80R22.5, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 200 l, color: white, emission class: euro3, Year of construction: 2026, Equipment: ABS, air conditioning, electric window regulation, trailer coupling, = Additional options and accessories = - Airbag - Seat-belts - Spare wheel - Sun visor - Tinted windows = Remarks = Cabin type: Day Cabin Country of origin: ITALY Displacement: 5,880cc Dimension: 8,740 x 2,490 x 2,830 Brakes: 2 independent pneumatic circuits Steering: LH Construction: Chassis wheelbase: 5,175 Gearbox type: ZF 9S1110 TO Gearbox 9 SP Steel Air Tank / Air Bag TYPE: ML 180E28-E3-EN18 Engine Power: 280 E3 Front Axle Weight: 7.1 Ton Rear Axle Weight: 11.5 Ton Chassis Length: 6600 mm Shipping Dimensions: 8.74 x 2.49 x 2.83 meters Ground Clearance front: 232 Ground Clearance rear: 179 Capacity Liters: 5,88 Colour: 50105 - White IC 194 PTO Pre-equipment Rear / Front Multileaf suspension 90A Alternator Expansion Module Turbo Charged And Intercooled Rear Cab Air Filter Single Reduction - Solo Axle Mechanical Suspensions Air Dryer Ppedpfx Aoy Tyh Iontot Senza Predisposizione Per Cassone Ribaltabile Spray Suspension Max Power(Hp/Kw)@Rpm-275/202 2700-930 Max Torque (Nm/Mkg) 2100/214,900-1470 Standard Braking System Manual Cab Tilt Cabina Mlc-My2015 Tetto Basso 2 Wheel Chocks 180E Bagding & Plating Central Exhaust Pipe Front Underrun Protection Gearbox Zf 9S 1110 To Jacking Equipment Loads 7100-11500 Kgs Senza Presa Aira Compressa In Cabina Rear Axle Ratio 4.89 Rear Cross Member Flat Rear Underrun Protection Steel Wheels Noise Reduction Ce 92/97 Side Spare Wheel Carrier Mph/Kph Speedometer Speed Limiter 90Km/H Cluster Kmh And Mph Indicator Pellicola Parasole Standard Toolkit 24/12V Convertor = More information = Transmission: ZF Tyre size: 295/80R22.5 Number of cylinders: 6 Engine capacity: 5.880 cc Carrying capacity: 12.800 kg GVW: 6.300 kg Make of engine: Iveco Gearbox model: 9S1110 TO

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 20497- Tyres 12.00R20, axle configuration: 6x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 550 l, color: white, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, EBS, cruise control, electric window regulation, fog lights, = Additional options and accessories = - Sun visor = Remarks = Cabin type: All Time (sleeper cabin) Country of origin: Spain Displacement: 9,000cc Dimension: 9,100 x 2,550 x 3,100 Ground clearance: Front - 337 Rear - 311 Brakes: Drum Brakes (Front/Rear) Steering: LH Drive Construction: Chassis Gearbox type: TX-16M Type: AT380T43H Colour: 50105- White IC 194 Shipping Dimension: 8.3x2.55x3.10 m Chassis Length: 5.8 meters approx Provision Radio Dab Orlandi Tow Hook Towing Version Eco-roll Loads 7500-13000-13000kg Drive tire 12.00R20 FMS Data interface Batteries 220Ah Rear dampers Reverse Buzzer Cross member D=200 KN 7+7 Pin trailer plug Automatic 45mm D=200 KN Front multileaf susp Wheel chocks (2) Headlight protection Rear Overhang 1990mm Pneum. Horn-Chassis Curtains on door windows Standard gear mode 08329 Steel front bumper Front anti-roll bar Rear multileaf susp Tyre inflation hose Vin code check digit Warning triangle Del. Heated screen Ppodey Tyhzspfx Antet Radice VIN WJM STD setting C11/C13 Safety Hor. Filter Cartridge Horizontal Air Filter 630cc Air Compressor Steel Air Tank Alternator 90A/24V APU Free discharge Horiz batt side fram Standard gray plastic part Mechanical cab suspension Manual cab tilting At low roof cab Del. package tray Temperature countries preparation With door sticker (IT03-EN) Fabric air susp driver seat Ecoswitch Limitation on SL Lower exhaust pipe Engine Speed 1900rpm Del. Front underrun protection S disp oper ped post Grey IC444 chassis Standard cab trim Speed limiter 90km/h Soft touch foam steering wheel MPH/KPH Speedometer Pre-heater Trattam. = More information = Tyre size: 20497- Tyres 12.00R20 Suspension: leaf suspension Empty weight: 9.000 kg Carrying capacity: 24.500 kg GVW: 33.500 kg

Condition: new, power: 89 kW (121.01 HP), fuel type: diesel, tire size: Tires Steel Belted :7.50R-16-12(ply), axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro2, Year of construction: 2026, Equipment: air conditioning, central locking, fog lights, power assisted steering, = Additional options and accessories = - Hydraulic power steering - Spare wheel - Sun visor - Tachometer = Remarks = Cabin type: Single Cabin Country of origin: Japan Displacement: 4,570cc Dimension: 5,985 x 2,120 x 2,270 Brakes: Hydraulic dual circuit with exhaust Brake Steering: LH Construction: Chassis wheelbase: 3,365 gross weight: 2,585 Tires Steel Belted :7.50R-16-12(ply) Front Bumper : White Dual Rear Wheels Front And Rear Hook Brakes : Hydraulic dual circuit with exhaust Brake Heater And Defroster (3) Front Seat Belts (2) Front Head Rest (2) outside Mirror Cigarette lighter Tilt Steering Inside Mirror Reverse Warning Buzzer Seat Material : Fabric Seats Alternator : 24V 50 A AM/FM Radio with CD Ppedpfoy Tyhuex Antet Ashtray Assist Side Power Window Head Tray - Driver & Assist Pre-Air Cleaner Fuel Tank Lock Wiper with intermittent Front under view mirror Owner's Manual ( Arabic & English) Front Under view Mirror Std. Tool Kit = More information = Tyre size: Tires Steel Belted :7.50R-16-12(ply) Number of cylinders: 4 Engine capacity: 4.570 cc Carrying capacity: 4.400 kg

Condition: new, power: 210 kW (285.52 HP), fuel type: diesel, tire size: 11.00R22.5 Tubeless, axle configuration: 4x2, wheelbase: 5,530 mm, fuel: diesel, fuel tank capacity: 200 l, color: white, emission class: euro4, Year of construction: 2024, Equipment: central locking, electric window regulation, fog lights, Cabin type: Single Cab Country of origin: Japan Displacement: 7,684cc Torque: 834 N.m. @ 1,500 RPM Dimension: 9,485 x2,490 x 3,325 Ground clearance: 255 mm Brakes: Parking Brake: Spring Brake Exhaust Brake: Yes Service Brake: Full Air Dual Circuit Front Brake: Drum (410 x 150 mm ) Rear Brake: Drum (410 x 220 mm ) Cab to end: 7,185 mm Steering: LH Construction: Chassis Gearbox type: MX06 Audio with Bluetooth Factory fitted Air Conditioner Final Gear Ratio: 6.833 Shipping Deminsion: 9,485 x 2,490 x 2,745 mm (LxWxH) Rear Overhang: 2,675 mm Psdpfxey Tyhno Antept Rear Axle Width: 2,430mm Front Tread: 2,050 mm Rear Tread: 1,835 mm Rear Chassis Height: 1,060 mm Front Kerb Weight: 3,245 kg Rear Kerb Weight: 2,470 kg Front Axle Weight: 6,000 kg Rear Axle Weight: 10,000 kg Alternator: 24V - 90A Frame Width: 840 mm Frame Section: 277 x 80 x 8.0 mm Rim Size: 20x 7.50 = More information = Tyre size: 11.00R22.5 Tubeless Number of cylinders: 6 Empty weight: 5.700 kg Carrying capacity: 10.300 kg GVW: 16.000 kg

Condition: new, power: 190 kW (258.33 HP), fuel type: diesel, tire size: 315/ 80R22.5 Tubeless, axle configuration: 6x4, wheelbase: 6,55,350 mm, fuel: diesel, fuel tank capacity: 200 l, color: white, emission class: euro4, total length: 9,480 mm, total width: 2,490 mm, total height: 3,340 mm, Year of construction: 2024, Equipment: central locking, electric window regulation, fog lights, Cabin type: Single Cab Country of origin: Japan Displacement: 7,684cc Torque: 834 N.m. @ 1,500 RPM Dimension: 9,485 x 2,490 x 3,340 Ground clearance: 250 mm Brakes: Anti Lock Brakes ( ABS) Parking Brake: Spring Brake Exhaust Brake: Yes Service Brake: Full Air Dual Circuit Front Brake: Drum (410 x 150 mm ) Rear Brake: Drum (410 x 220 mm ) Steering: LH Construction: Chassis wheelbase: 4,630 + 1,350 mm Gearbox type: M009 Audio with Bluetooth Factory fitted Air Conditioner Final Gear Ratio: 5.25 Chassis Length: 7,095 mm Rear Overhang: 2,225 mm Rear Axle Width: 2480mm Front Tread: 2,030 mm Rear Tread: 1,855 mm Rear Chassis Height: 1,085 mm Front Kerb Weight: 3,265 kg Rear Kerb Weight: 3,945 kg Front Axle Weight: 7,500 kg Rear Axle Weight: 21,000 kg Alternator: 24V - 90A Shipping Dimension: 9.5 x 2.5 x 2.8 m (LxWxH) Frame Width: 840 mm Frame Section: 298 x 80 x 7.0 mm Rim Size: 22.5 x 9.0 = More information = Tyre size: 315/ 80R22.5 Tubeless Number of cylinders: 6 Engine capacity: 7.684 cc Empty weight: 7.000 kg Carrying capacity: 21.000 kg GVW: 28.000 kg Gearbox model: М009 Ppodpjy Tyhhefx Antot

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Podjy Tyg Repfx Antept Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Pjdpfx Anoy Tyg Detopt Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, power: 96 kW (130.52 HP), fuel type: diesel, tire size: 7.50 R -16-12 PR (front and rear), axle configuration: 4x2, wheelbase: 3,370 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, gearing type: mechanical, emission class: euro2, Year of construction: 2024, Equipment: air conditioning, Cabin type: Single Cab Country of origin: Japan Displacement: 2,999cc Torque: 34 kg-m/ 1,600-2600 rpm Dimension: 5,985 x 2,120 x 2,255 Brakes: HYDRAULIC, DUAL CIRCUIT + DRUMS + ABS Steering: LH Construction: Chassis EXHAUST BRAKE PRE AIR CLEANER REVERSE WARNING BUZZER FUEL TANK LOCK REAR BUMPER HEADER TRAY (DRIVER & PASSENGER) Ppedpey Tygwjfx Antst TARE WEIGHT: 2,260 kg STEERING: RECIRCULATING BALL & NUT TYPE WITH POWER ASSIST SEATING CAPACITY: 1+2 PERSONS = More information = Tyre size: 7.50 R -16-12 PR (front and rear) Empty weight: 2.300 kg Carrying capacity: 4.200 kg GVW: 6.500 kg

Condition: new, power: 96 kW (130.52 HP), fuel type: diesel, tire size: 7.50\16R12, axle configuration: 4x2, wheelbase: 3,820 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 6,350 mm, total width: 2,120 mm, total height: 2,250 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, = Additional options and accessories = - Autoradio - CD - Twin wheels = Remarks = Cabin type: Single Cab Country of origin: Japan Displacement: 2,999cc Torque: 34Kg-m/ 1,600-2,600 rpm Dimension: 6,635 x 2,120 x 2,255 Brakes: HYDRAULIC, DUAL CIRCUIT + DRUMS + ABS Steering: LH Construction: Chassis PRE AIR CLEANER FUEL TANK LOCK REAR BUMPER HEADER TRAY (DRIVERS & PASSENGER) POWER WINDOW EXHAUST BRAKE REVERSE WARNING BUZZER TYRE WEIGHT: 2,305 KG STEERING: RECIRCULATING BALL & NUT TYPE WITH POWER ASSIST SEATING CAPACITY: 2+1 Person Ppsdjy Tygdjpfx Antot = More information = Tyre size: 7.50\16R12 Suspension: leaf suspension Number of cylinders: 4 Engine capacity: 3.000 cc Empty weight: 2.305 kg Carrying capacity: 4.200 kg GVW: 6.505 kg