Used Mitutoyo Ph3500 Mitutoyo Ph3515F for sale (159)

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Itjdpsu Sqmdjfx An Dsf

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0032703, Accessories: - Reference plate 63.3 HRC - Reference plate 58.5 HR30N - Test weights 150, 100, 60, 45, 30 kgf - Preload weight - V-anvil - Spirit level - Diamond indenter - Steel ball indenter 1/8" - Steel replacement balls 1/8" - Dust cover Itedpfx Aox E U U Hjn Dsf - Operating manual The diamond indenter is slightly damaged below the tip (minor chipping – see photos).

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 705 mm, measuring range Z-axis: 405 mm, table width: 638 mm, table length: 1,160 mm, table load: 180 kg, TECHNICAL DETAILS Measuring range X: 505 mm Measuring range Y: 705 mm Measuring range Z: 405 mm Guide method: Air bearings on each axis Drive speed CNC mode: 8 to 300 mm/s Drive speed Joystick mode: 0 to 80 mm/s Measuring system: Linear encoder Resolution: 0.001 mm Measuring table material: Granite Table size (workpiece clamping surface): 638 x 1160 mm Workpiece clamping: M8 x 1.25 Maximum workpiece height: 545 mm Maximum workpiece mass: 180 kg MACHINE DETAILS Machine height: 2,185 mm Machine width: 1,082 mm Machine depth: 1,122 mm Machine weight (incl. stand and control): 440 / 515 kg Iedow T Thyepfx An Dotf Power supply (installation): Single phase 100 to 240 VAC, 50/60 Hz, D-type grounding Power supply capacity: 700 VA Air pressure: 0.4 MPa EQUIPMENT - Air consumption: 50 l/min (under standard conditions) - Temperature and floor unevenness must comply with the conditions specified in "1.2.1 Environmental Conditions".

Condition: good (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the largest specialist with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that is inspected, tested, and guaranteed to be ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex V776 Year of manufacture: 2020 Manufacturer: Mitutoyo Measuring range: 700 x 700 x 600 mm Controller: UC-480 Operating manual: Available Hardware and software configuration: Itsdpfx Anexqnubj Def PC/CPU: Demonstration/brand-new device Monitor: Demonstration device Printer: Demonstration device Software: Current Mitutoyo Software MCosmos-1 V4.3 Geopak-WIN Accessories: Probe head mount: Renishaw PH10MQ Probe: Renishaw TP200 Additional accessories: Ceramic calibration sphere Various probe styli and extensions Renishaw change rack 1 x SCR-200 We are happy to provide you with personalized advice as specialists to find the right machine for your measurement needs. Worldwide delivery available upon request!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Machine type: Mitutoyo STRATO 9106 FAL-A910 Year of manufacture: 2001 Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Isdpfx Aeqz T H Aon Detf Accessories: Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Modifications and errors in the technical data and information as well as prior sale are subject to change!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, MCOSMOS with GEOPAK module (CAD-assisted evaluation). Software - MCOSMOS 3 CNC V4 Equipment: PH10MQ probe head (incl. FCR25 quick-change rack). Ijdpfx Ajx H Nn Ren Djtf SP25M scanning probe system with 5-piece probe module set. MCOSMOS 3 CNC V4 incl. dongle (Wibu-Box). CAT1000PS V4 (CAD comparison and evaluation). Software upgrade MCOSMOS-1 from V2 to V4. GEO-EDM add-on module for eroded parts. Part-program generator and GEO-EDM assistant.

Condition: used, This listing is for a Mitutoyo DP-3 Calculator Isdpfxoxzhv Ho An Djtf

Condition: good (used), Mitutoyo Height Master 515-318 Height Micrometer Height Master 515-318 Height Micrometer Itsdpsu Egyyefx An Dof Measuring range 10-310 mm Reading marks in 0.001 mm increments Quantity: 1 piece For calibrating and adjusting height gauges and marking devices, for example. Mitutoyo supplies a double-block height micrometer with a counter that makes reading faster, easier, and more accurate. The Height Master's gauge block is arranged in two rows, one on the left and one on the right, each with a height interval of 20 mm. Manufacturer price: €4,170 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), functionality: fully functional, Used 3D coordinate measuring machine Mitutoyo Crysta Apex C7106 - Precise scanning technology for large workpieces On our marketplace we offer the used 3D coordinate measuring machine Mitutoyo Crysta Apex C7106, equipped with a scanning probe system and the latest MCOSMOS-3 V5 software. This machine has been tested and calibrated by our technicians to ensure that it delivers precise measurements, even on complex workpieces. The Crysta Apex C7106 offers a generous measuring range and enables high-precision 3D measurements, ideal for quality control on the shop floor. Technical data: Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Accuracy: ±1.7 + 0.3L/100 µm Drive: CNC-controlled for fully automated measurements Touch probe: Scanning touch probe, ideal for precise surface inspections and measurements of complex geometries Software: Mitutoyo MCOSMOS-3 V5, the latest version of the powerful measuring software that supports comprehensive 3D inspections and CAD integration Advantages: Precise scanning touch probe: this machine is equipped with a scanning touch probe capable of continuously capturing measurement points across the surface of the workpiece. This makes it ideal for detailed inspections and the precise measurement of free-form surfaces and complex geometries. Latest software: With the latest version of the MCOSMOS-3 V5 software, you can handle complex 3D measurement tasks, import CAD data and create measurement programs that significantly increase the efficiency of your quality control. Large measuring range: With a measuring range of 700 mm x 1000 mm x 600 mm, the C7106 is suitable for medium-sized to large workpieces, making it the perfect solution for industrial inspection processes. Reliability through testing: This used machine has been thoroughly tested and calibrated to ensure it continues to deliver highly accurate measurement results. Despite its age, it is ready for use in production and offers a cost-effective solution for companies. Itsdpfx Aeuzu Ecjn Def Automation: The CNC control enables fully automated measurements, providing repeatable and consistent results, significantly improving efficiency on the shop floor. The Mitutoyo Crysta Apex C7106 offers an ideal combination of state-of-the-art scanning technology and robust software, making it an outstanding choice for precise inspection tasks on the shop floor. This used machine is an economical option for companies that require reliable and precise measurement technology.

Condition: good (used), functionality: fully functional, Tested used 3D coordinate measuring machine Mitutoyo Euro C Apex 7106 - Precise and reliable measurements Itjdpfx Anjuyiuio Dof On our marketplace you will find the used 3D coordinate measuring machine Mitutoyo Euro C Apex 7106, which still offers outstanding precision despite its older year of manufacture thanks to regular maintenance and comprehensive testing by our experts. This machine has been thoroughly tested to ensure that it still delivers reliable measurements. Ideal for larger workpieces, the Euro C Apex 7106 offers both high measurement accuracy and a stable granite construction that ensures repeatable results. It is an excellent solution for companies looking for a cost-effective, used measuring machine without compromising on measurement quality. Technical data: Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Accuracy: ±2.9 + 0.3 L/100 µm Drive: CNC-controlled, for fully automatic measuring processes Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Tested quality: This machine has been extensively tested and calibrated in our workshop to ensure its reliability and precision. It is ready for immediate use in your production. Large measuring range: With a measuring range of 700 mm x 1000 mm x 600 mm, the Euro C Apex 7106 is ideal for inspecting larger workpieces on the shop floor. Stability and precision: Thanks to the granite base and robust construction, this machine guarantees precise and repeatable measurements even with intensive use. Automated efficiency: The CNC control and Renishaw TP200 system enable fully automated and repeatable measurement processes, increasing throughput on the shop floor. This used Mitutoyo Euro C Apex 7106 has been inspected, tested and prepared for the production environment by our experts. Despite its age, it remains a cost-effective and accurate solution for companies that need reliable measurement technology.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Mitutoyo Crysta Apex S574 – Precision Coordinate Measuring Machine with PH10M & SP25M Year of manufacture: 2012 Condition: Very good, fully functional Iedpfoxrc E Djx An Dstf This Mitutoyo Crysta Apex S574 impresses with first-class precision, stability, and reliability. The machine has been regularly serviced, is in excellent condition, and is immediately ready for use—ideal for companies that value precise measurement results and durable technology. Technical data: • Measuring range: X = 500 mm | Y = 700 mm | Z = 400 mm • Probe system: Renishaw PH10M motorized indexing head • Scanning probe: Renishaw SP25M • Year of manufacture: 2012 • Condition: very good, tested and fully functional • Software: MCosmos V3 Your benefits at a glance: • Highest accuracy – ideal for demanding form and dimensional inspections • Flexible probing thanks to motorized PH10M head • Reliable scanning measurements with the SP25M system • Well-maintained used machine – technically inspected and immediately available Optional: • Delivery, installation, and training by experienced metrologists

Condition: good (used), functionality: fully functional, Tested used 3D coordinate measuring machine Mitutoyo Euro C Apex 9166 - precision and durability We offer a used Mitutoyo Euro C Apex 9166 3D coordinate measuring machine on our marketplace, which was developed for large and complex workpieces. Despite its older age, this machine has been extensively tested and calibrated by our technicians to ensure that it continues to deliver accurate and reliable measurements. The Euro C Apex 9166 offers a generous measuring range and robust construction, ideal for companies looking for a tried and tested solution. Technical data: Itjdpfx Anjuyiv Tj Djf Measuring range: X = 900 mm, Y = 1600 mm, Z = 600 mm Accuracy: ±2.9 + 0.4 L/100 µm Drive: CNC-controlled, for fully automatic measuring processes Touch probe: Renishaw TP200 with automatic probe change Software: Mitutoyo MCOSMOS Advantages: Tested and reliable performance: This used Mitutoyo Euro C Apex 9166 has been fully tested and calibrated by our experts. Despite the older year of manufacture, the machine guarantees precise and repeatable measurement results. Large measuring range: With a measuring range of 900 mm x 1600 mm x 600 mm, this machine is ideal for inspecting large workpieces. Robust construction: The granite construction of the base ensures stability and enables precise measurements even during intensive use. Efficient automation: The CNC control and Renishaw TP200 touch probe enable fully automated and repeatable inspection, increasing production efficiency. Cost-effective investment: This machine offers an economical solution for companies looking for a proven and reliable 3D coordinate measuring machine. This used Mitutoyo Euro C Apex 9166 is ideal for companies that need a reliable and powerful 3D coordinate measuring machine for large workpieces. Despite its age, it remains a first-class choice for precise and automated measurements as it has been thoroughly tested by our metrology specialists

Condition: good (used), functionality: fully functional, used 3D coordinate measuring machine Mitutoyo Euro C Apex 544 On our marketplace, we offer a pre-owned Mitutoyo Euro C Apex 544 3D coordinate measuring machine that retains impressive reliability and measurement accuracy despite its older age. This machine has been extensively inspected and tested by our experts to ensure that it still meets the high standards of metrology. The Euro C Apex 544's precise measurements, robust construction and durable components make it an excellent choice for quality control in manufacturing today. It has been thoroughly calibrated and tested by us so that it is ready for use in your production. Technical data: Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer accuracy: ±2.9 µm + 0.3L/100 µm Itedpfx Aeuyiu Nsn Djf Drive: CNC-controlled, with fully automated measuring sequences Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Proven reliability: this used machine has been thoroughly inspected, tested and calibrated by our metrology specialists to ensure continued precise performance. Stable precision: Thanks to its granite construction and proven Mitutoyo design, the machine delivers highly accurate and repeatable measurements even after years of use. Automation and efficiency: The CNC control and Renishaw TP200 touch probe enable fully automated, efficient measurements, optimizing your production processes. Reliable investment: Even as a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies looking for a tried and tested 3D coordinate measuring machine. This machine is the perfect choice for companies looking for a proven and tested quality control solution. Despite its age, it has been extensively tested and calibrated to ensure maximum reliability and precision in your production.

Condition: used, This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Itsdoxv A Rujpfx An Def Large LCD display Protected to IP65 for use where coolant may be present Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid.

Condition: used, This listing is for the Mitutoyo BM1-8-1B/PD Gauge block set The unit is in full working condition and is ready for immediate release This Mitutoyo 81-piece rectangular steel gauge block set is crafted from high-chromium alloy steel and features an ultra-micro-lapped surface finish for precision and durability. Carefully heat treated and stress-relieved, these blocks provide exceptional wear resistance, stability, and wringing performance, ideal for high-precision calibration, inspection, and tooling environments. Mitutoyo gauge blocks meet or exceed all internationally recognized standards (ASME, ISO, JIS), with flatness, parallelism, and surface finish that often surpass government specifications Iedpfsxv A Rzox An Dotf

Condition: used, functionality: unexamined, machine/vehicle number: Euro-C-A574, Used Mitutoyo Euro-C-A574 measuring table, 3-axis, in unknown functional condition (for parts or repair) Manufacturer: Mitutoyo Model: EURO-APEX574 | CMMC-F | TEMPIF-UC2 (& RENISHAW pi200-3) Isdpow Hqrwefx An Dstf With red securing material for transport (see photo) Measuring range: 500 x 700 x 400 mm Weight: ~450 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, working range: 3,500 mm, sheet thickness (max.): 250 mm, sheet thickness steel (max.): 250 mm, input voltage: 230 V, cutting speed: 12,000 mm/min, Equipment: documentation/manual, Koike Maxigraph 3500 cutting machine with Burny Phantom control. This machine is suitable for oxy-fuel and plasma cutting. The machine is used but in good condition. Machine can be seen in operation. Year of manufacture: 2010 Please note, this offer includes only: - Gantry - Control unit - X, Y, and P motors - Lifter and Koike THC height control Isdpeyc Ecnefx An Djtf - Cables and hoses Excluding: - Cutting table - Extractor/filter - Hypertherm 260 plasma source - Warranty For questions, please email us. If you have any questions or require more information, feel free to send us a message or call us.

Condition: excellent (used), Holex, Inox, Mitutoyo 2000mm scribe caliper. Price quoted for Holex 2000mm caliper. Itodpfx Anou Svbae Def

Condition: used, Dimensions (LxBxH): 233 x 194 x 212 cm Serial number: 7434 T-slot clamping table: 1600x340mm T-slots: 3 slots (18mm) Distance of slots: 80mm Itodpfxjy Ab Iuj An Djf Total axes: 5 X axis: 1150mm Y-axis: 310mm Z-axis: 465mm Milling head tilt: 45 Vertical movement milling head: 470mm Spindle cone: ISO-50 Spindle diameter: 90mm Spindle stroke: 152mm Number of speeds: 18 Speed range: 28 - 1400 rpm Axis travel X/Y: 12-800mm/min Axis travel Z: 3.6 - 240mm/min X/Y: 3000mm/min Z:900mm/min Main motor: 7.5kW Feed motor: 2kW Cooling pump: 0.12kW Overall Dimensions (LxWxH): 2330x1940x2120mm Equipped with: machine clamp, Mitutoyo digital readout Online auction of metalworking machinery and welding equipment (including SAFAN, DARLEY, SCHIESS, WMW/NILES, ABUS (hall) cranes, VDF, EWM, LINCOLN, FERREX, OP plants and ESAB welding columns, various welding roller stands and welding manipulators PEMA, ADK etc.) from the recent bankruptcy of Bronswerk Heat Transfer BV, the renowned manufacturer of heat exchangers for the oil and gas industry, among others, in Nijkerk, the Netherlands. The online auction opens Thursday 26 March and closes Tuesday 21 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 16 April Pickup days are on: - Wednesday 6 May - Thursday 7 May - Friday 8 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: not inspected (used), functionality: unexamined, table length: 1,200 mm, table thickness: 120 mm, table width: 800 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Plate dimensions (L x W x H): 1,200 mm x 800 mm x 120 mm Accuracy grade: Grade 0 Flatness: 5.6 µ Itsdpfxsyr Hlve An Djf MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,200 x 800 x 1,500 mm Weight: 550 kg EQUIPMENT Digital height gauge (manufacturer: MITUTOYO) Various measuring prisms Integrated workshop drawer cabinet with assorted measuring tools External reference: Lot 5

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Itodpfx Aoym Uqcsn Djf Submitting a bid obligates you to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Auction of digital & analog calipers in various models and sizes (mainly from Mitutoyo and Mahr)! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 100 mm Weight: 50 kg External reference: CES - Lot 4

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment Iodpfxeu Sq Emo An Dstf 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture *

Condition: good (used), functionality: fully functional, Equipment & Features: • Universal milling head • Mechanical feeds • Digital position display Mitutoyo KA-200 (3 axes) • Solid cast iron construction • Classic, user-friendly controls Iedpfx Ansymdwlo Dotf • Electrical system and control by Schiffselektronik Rostock • Original Heckert nameplates available Technical Data (according to nameplate, excerpt): • Mains voltage: 380 V • Frequency: 50 Hz • Rated power: approx. 2.2 kW • Feeds adjustable • Machine weight: approx. 3.2 t

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Travel in Y: 160 mm Iodpfjykiqfsx An Dstf Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation .

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section With coolant pump With Mitutoyo digital readout 380v Itsdpjylpqhefx An Djf Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).