Used Mobile Extraction System / Raw Air System for sale (55,574)

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. Ndsdozmaqaopfx Aiyoa More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: as good as new (ex-display), Year of construction: 2016, functionality: fully functional, power: 75 kW (101.97 HP), volume flow: 52,000 m³/h, suction capacity: 52,000 m³/h, filter area: 481.7 m², total height: 7,400 mm, total length: 9,800 mm, total width: 2,450 mm, Equipment: CE marking, documentation/manual, Stationary filtration system, VENTIL VENETA brand. Njdsy Um Tyspfx Aiyoda Model: PF-JET 495/45.

Year of construction: 2005, condition: used, Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again. Nsdozgczhjpfx Aiyeda Additional title: Workshop dust extraction Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h Power: 2.2 kW Current: 5 A Voltage: 400 V Frequency: 50 Hz Base construction: on a mobile frame Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW Njdpfsyh Hp Rjx Aiysda -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: Ndedpfx Aiowrb I Heyea -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Nodpew Nhbmefx Aiyoda -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 1400/1995/H2100 mm -Shaking motor: 0.25 kW Njdpfx Aijw Hz T Sjyeda -Funnel frame: 1400/1995/H2350 mm -Opening: Ø 500 mm / 500 x 220 mm -Individual components: see photos -Weight: 220 kg / 521 kg

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors Ndjdpjx I Aknjfx Aiysa -Manufacturer: Kemper, mobile welding fume extraction system type Eco M 3 x 400 V / 50 Hz -Drive: 0.75 kW -Max. volume flow: 1650 m³/h -Max. pressure increase: 2100 Pa -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Number: 2 welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Year of construction: 2021, condition: excellent (used), Filter system, air conditioning unit, air conditioning, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Filter unit (from an air conditioning system) -Manufacturer: Wolf -Type: KG Top 4040 -Power: Fan 4x 5.0 kW Nsdsxd Unhopfx Aiyjda -Volume flow: 47000 m³/h -Dimensions: 2950/2800/H2800 mm -Weight: 1400 kg

Condition: good (used), Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm Nsdpfx Aijlb Iv Eoyoda -Total weight: 196 kg

Condition: good (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Nedpfsy Nnkvox Aiyoda Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

Condition: good (used), Year of construction: 1998, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system -Manufacturer: BTR Environmental, Unicell cartridge dust extraction system -Type: C16-2K7 -Extraction fan power: 3.0 kW -Inlet: Ø 220 mm Nodpfx Aieu Uww Soyjda -Individual components: see photos -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg

Condition: excellent (used), mileage: 8,96,745 km, power: 368 kW (500.34 HP), first registration: 06/2011, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: red, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2011, Equipment: air conditioning, cruise control, differential lock, electric window regulation, fog lights, seat heater, trailer coupling, - Aluminum fuel tank - Differential lock - Air conditioning - Leather interior - Leather upholstery - Automatic heating system - Power take-off (PTO) - Tow hitch General Information Cab: double Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Ndedpezpykrofx Aiyja Front axle 2: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available every day to assist you in finding the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle firsthand. At KW-Automotive, you can expect a wide selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way, you are guaranteed to find a vehicle that meets your requirements and budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personalized service Reliable vehicles Attractive prices Fast delivery, so you can get started right away Fast communication via telephone and WhatsApp Sales and delivery also to foreign countries For many years, we have been a reliable partner for our customers – and we are proud of that. Please note: All sales prices are plus preparation and delivery costs. Would you like to learn more about a specific vehicle? Visit our website for detailed information, videos and technical details. Do you need a quick answer? Just write to us via WhatsApp! We will immediately send you further information, photos or a video. Job van Eldik

Condition: used, ALKO clean air extraction unit, Power Unit 200P - used Air filtration using filter hoses, Cleaning performed pneumatically, Dust-tested, Mobile collection container ----- Technical data ----- Extraction nozzle diameter: 200 mm, Nominal air flow rate: 2,261 m³/h, Maximum negative pressure: 2,174 Pa, Ndsdpfx Aioy T Ebgoyoa Number of bags: 2, Motor: 3 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,300 x 850 x 2,050 mm, Weight: 470 kg

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation Ndjdewwtuiopfx Aiyea - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: new, Thanks to their modular design, the PROFI JET® series system filter units enable the bespoke planning and construction of extraction solutions for virtually any required air volume and practically every conceivable application. The proven system also impresses with outstanding noise protection due to its insulated wall panels and, when installed outdoors, minimizes heat loss. Eligible for BAFA funding under Module 4. Operation: The custom-designed extraction systems of the PROFI JET series are built on a robust steel frame. The frame is fully clad with insulated, double-walled, powder-coated steel sheet panels to ensure that all components—including fan, filter cleaning, and discharge elements—are protected from dirt and weather within the closed system enclosure. The clean-air side fans are installed at the top of the unit and draw in dust- and chip-laden air into the filter section. A generously proportioned pre-separation chamber ensures effective separation of coarse particles and chips. The subsequent filter bags or cartridges remove any remaining fine dust. The cleaned exhaust air is routed through a sound-insulated return air chamber either back into the building or discharged outside. Applications: - Extraction at multiple processing machines, workstations, or entire production areas - Spatial ventilation and extraction for enclosures and work cabins - Suitable for virtually all types of dust and chips - Also for dusts and applications with ATEX classification - Extraction especially in the wood, plastics, metal, welding, cutting, and recycling industries—as well as many others Advantages: - Custom, precise planning and implementation of your extraction system - Cost-effective and quick delivery due to modular design with standard components - Quiet and energy-saving operation thanks to insulated panels - Consistently high extraction performance due to integrated pre-separation chamber and AL-KO OPTI JET® filter cleaning system - Heating cost savings, as 100% recirculated air operation is possible in many cases - Minimal space requirements due to compact construction Ndjdewwryqepfx Aiysa - Suitable for indoor and outdoor installation - Professional appearance thanks to powder-coated panels - Available in ATEX-compliant versions - Comprehensive accessories and numerous options for individualized system configuration - Eligible for BAFA funding under Module 4

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: Ndsdpfx Ajwwt E Ujiyoa A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Applications: - Direct extraction of dust and chips - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: - High suction performance due to an efficient fan and cleanable filters with a long service life - Suitable for a wide range of applications Nsdpfxswwkrfj Aiyjda - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Condition: new, functionality: fully functional, MIDI MAX is the cheapest and most practical solution for dust removal, allowing you to have a large filtration area and a large collection bag. Nsdpfxswfgnxs Aiyeda The MIDI MAX suction filter unit is a very reliable system for filtering dust and small sawdust where the quantity is not so large as to require the use of a separate container.

Condition: excellent (used), ALKO 200 clean air extraction unit with frequency converter – used Air filtration using filter hoses, Pneumatic cleaning system, Dust-tested, Movable collection container, Frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Extraction nozzle diameter: 200 mm, Nominal volume flow: 2,261 m³/h, Max. negative pressure: 2,446 Pa, Number of filter bags: 2, Motor: 4 kW, Compressed air connection: Max. 8.5 bar, Dimensions (L x W x H): 2,280 x 1,010 x 2,050 mm, Weight: 470 kg Quality information: - Complete basic inspection - Complete basic cleaning - Pneumatic system checked Ndodpezg A N Ejfx Aiyoa - Ready for immediate use

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Ndjdjyq Nl Nspfx Aiysa Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) Njdpfxjznibwj Aiyoda You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, Extraction unit 5.5 kW Ndsdpfeyr Nhmox Aiyoa Power: 5.5 kW Filter bag cleaning system 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Option for air recirculation back into the workshop

Condition: excellent (used), functionality: fully functional, Saw dust extraction unit SCHUKO STA 5.5 kW Width: 2200 mm Height: 3600 mm Depth: 1100 mm Bag length: 200 cm Filter sleeve diameter: 140 mm Number of filter sleeves: 54 pcs Ndsdpfxex I N A Dj Aiysa Collection bags: 3 pcs Collection bag diameter: 500 mm Suction port: 250 mm Main motor power: 5.5 kW Filter bag shaking system Extraction pipes included

Condition: used, Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 10,000 m³/h, total height: 2,150 mm, total length: 2,400 mm, total width: 1,800 mm, overall weight: 1,250 kg, We are offering this used KEMPER 811000100FU extraction system, manufactured in 2018. Type: 811000100FU Airflow rate: 10000 m³/h Voltage: 400 V Rated current: 13.8 A Motor power: 7.5 kW Current: 3 ~ Frequency: 50 Hz Duty cycle: 100% Protection class IP: Control voltage: 24 V Minimum compressed air supply: 5 bar Maximum compressed air supply: 6 bar Maximum static pressure: 2500 Pa Weight: 1250 kg Ndodpfszk Dukjx Aiyja If you have any questions or require further information, please feel free to send us a message or call us.