Used Moc Cleaning System Type 100 for sale (76,371)

Condition: new, connected load frequency 230 V battery 24V / 200Ah Brush diameter 510 mm tank capacity 50 / 50 Liter weight 90 kg Ljdsynnkropfx An Iead range L-W-H 1,0 x 0,6 x 1,0 mm RTE Floor Cleaning Machine: - with drive system - battery charger - working capacity 2000 m²/h - suction width: 850 mm - cleaning width: 510 mm - fresh/wastewater tank volume: 55/60 L

Condition: new, length 1900 mm width 810 mm height 860 mm Ljdpefrztfsfx An Isad internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets.

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device Lsdpjhx Haljfx An Ioad - Drainage device - Anti-tip device and forklift pockets.

Condition: new, connected load frequency 230 V Ljdpfjidabksx An Ioad battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: new, internal dimension 550 x 730 x 400 mm 0 185 l operating pressure 5-8 bar weight 50 kg dimensions 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. Lodjupxigspfx An Ioad LED lighting. Air blower. Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that sets the degreaser to 50 Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers.

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm Laodpjvu Hccsfx An Isd turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: good (used), Zippel crankshaft cleaning system Zippel Ljdsihfn Ijpfx An Ioad Crankshaft cleaning machine L x W x H = 3520 x 520 x 700 mm Further cleaning machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2000, Leutenegger (Starrag) Wash Box Technical Specifications Year of Construction: 2000 Bath Volume: approx. 0.9 m³ Laodpfxod Nciho An Iod Chemicals: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply Cable: 40 A Control Voltage: 24 V DC Maximum Temperature: 50° C Electric Heating Heating Output: 3x3.25 kW = 9.75 kW Working Pump: 3 kW Exhaust Fan: 0.37 kW Exhaust Air Flow: 400 m³/h Shipping Costs Upon Request Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2004, Hinst continuous cleaning system Continuous washing plants of the manufacturer Hinst are designed to treat serial parts in high quantities with highest cleanliness requirements at the same time. Plant no. 04.333 Year of construction 12.2004 dimensions approx. WxDxH: 3,80 x 4,30 x 3,80m incl. - 6 baskets: basket dimensions: 48,5x48,5x H26cm      - roller conveyor 2,10x52x90cm The continuous cleaning system has already been professionally dismantled and stored at a value of 3.500 €. these are included in the purchase price Transport can be organised by us, loading volume 2 articulated lorries. Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. Lajdpfx Aeg Ipp Asn Ied komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Lodpjw Ewl Uofx An Ioad Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean Ledpfjxzh E Uex An Isad The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed

Condition: good (used), Manufacturer: Systema Ljdpfei D Dkaex An Ijad Type: H100

Condition: good (used), Manufacturer: Systema Type: H100 Ljdpei D Dkdofx An Ijad

Condition: new, table length 1500 mm Laodpoznngfofx An Isd table width 1000 mm table height 200 mm bore 28 mm weight 554 kg

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Lodozimaaepfx An Iead Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine wood Corundum ceramic grinding stone Ledpfxefmcims An Ijad Output: approx. 100 g / minute Degree of grinding: Infinitely adjustable from very fine to coarse Funnel collection approx. 1.3 kg grain Connection 220V, 360 watts Dimensions: 208 x 242 x 380 mm, WxDxH NEW machine with warranty Visit us at the Milbrandt outlet shop

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, working width: 1,100 mm, Fully functional, with extra new sanding brush attachments; the workpiece is guided through the machine via two belts. Lajdpfxjzaapde An Ied

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Lajdpfxof Rth Te An Isd Working width 1060mm Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS

Year of construction: 2026, condition: like new (used), Drip tray MRA system type WO 1000-001 Length 1450 x 1450 Height 530 Lasdpfxeyzmmmj An Iod

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Ledpoy Tlzaefx An Iead

Condition: ready for operation (used), Year of construction: 2025, An integrated packaging system Soco consisting of a carton erector and a carton sealer is available. 1) Bottom flap folder Soco F-100P, min. carton width: 320mm, max. carton width: 520mm, max. carton length: 900mm, machine dimensions X/Y: approx. 750mm/1150mm. 2) Carton sealing machine Soco T-402 5-5-7, carton length range: 200mm-750mm, carton width range: 120mm-460mm, carton height range: 95mm-470mm, sealing capacity: 18/min, max. adhesive tape roll diameter: 385mm, weight: approx. 200kg. Including safety guarding, roller conveyor and transfer unit. The system is as new and has only been in operation since January 2026. Documentation available. An on-site inspection is possible. Ljdpfx Ajy Hk Tnjn Ijad

Condition: not inspected (used), Year of construction: 1976, Spitzl. Cylindrical grinding machine Nomoco M100 Offered here is a grinding machine from the company Nomoco of the type M100. Technical data: Ljdshc S Spepfx An Ijad Manufacturer: Nomoco Type: M 100 year of manufacture: 1976 max. grinding diameter: 100mm max. grinding length: 180mm grinding wheels: Ø 400mm max. grinding wheel width: 180mm weight: 3,2t grinding type: plunge grinding

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Lasdpfowm Nq Ejx An Ied • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Lasdpey Spcljfx An Isd Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: good (used), Year of construction: 2003, clamping force: 650 kN, screw diameter: 110 mm, displacement volume: 5,797 cm³, injection pressure: 1,971 bar, injection weight: 5,220 g, mold height (min.): 450 mm, opening stroke: 950 mm, plate length: 1,450 mm, plate width: 1,350 mm, overall weight: 44,500 kg, Core component 2 Demag robot Lajdpfxszna Rie An Iod