Used Moriseiki Sv-500/50 for sale (39,561)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial number: 450 The machine is still under power and available at short notice. • P8 Power Supply worth €1,500 was newly replaced in August 2024 Cjdpfx Aoyt Nnpon Ujrc • The spindle was repaired in 2017 and, since then, has mostly been used in single-shift operation, as we primarily produce single parts and small batches. For this reason, the machine has spent most of its time being set up. • Machine: Milling machine Mori Seiki SH50 • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travels: X630mm / Y600mm / Z650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed of the X axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring on the pallet changer is likely defective, leading to oil leakage. As a temporary fix, we installed a ball valve in between; when we need to change pallets (which is not very often), we open it manually. The machine is sold as viewed, without any guarantee or warranty. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or need further information, please feel free to write us a message or call us.

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS Cjdpotvau Hsfx An Ujrc NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup Codpfxewbknbo An Uerc ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, mileage: 78,049 km, power: 500 kW (679.81 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 60,000 kg, tire size: 385/95 R22.50, axle configuration: 10x8, next inspection (TÜV): 08/2022, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 2, total length: 16,650 mm, total width: 25,500 mm, total height: 40,000 mm, front tire size: 385/95 R22.50, operation weight: 60,000 kg, Equipment: air conditioning, crane,

Condition: used, empty load weight: 1,250 kg, maximum load weight: 2,250 kg, first registration: 07/2004, next inspection (TÜV): 01/2019, total width: 25,500 mm, tire size: 195 / R 14C / 8mm, front tire size: 195 / R 14C / 8mm, operation weight: 3,500 kg,

Condition: ready for operation (used), functionality: fully functional, The Tecno Fluss VM 5000, manufactured in 2003 and identified by serial number 913, is an ideal solution for automating the dispensing of liquid or semi-solid products. This versatile model facilitates the precise dosing of various creams, sauces, and pastes. Furthermore, its ergonomic design reduces manual intervention, thereby increasing production rates. Furthermore, the intuitive operation of the Tecno Fluss VM 5000 allows operators to easily adjust parameters, ensuring a consistent flow. Each portion remains uniform, even at high production rates. Furthermore, the use of stainless steel components enhances its robustness and simplifies maintenance. As a result, this machine helps reduce the risk of contamination while extending its lifespan. Furthermore, the robustness of this dispenser meets the rigorous standards of the food industry. In addition, its compact design facilitates its integration, whether in a confined space or within a complete production line. In short, the Tecno Fluss VM 5000 represents a strategic investment to improve dosing accuracy, increase productivity, and reduce operational costs. This ensures consistent quality and significant time savings in your manufacturing processes. Codjwdv Ryspfx An Ujrc Technical specifications: Adjustable production speed to accommodate high throughput Stainless steel construction to maintain optimal hygiene Intuitive control for simplified use Dosing system suitable for liquid and semi-solid products Estimated power: approximately 3 kW depending on configuration OWYSnISl

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph Crjdpfx Asylyh Dsn Uec - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation Codpoyfv Tvsfx An Usrc • Keller automatic extraction system • Basement exhaust extraction system

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Crodpfx Ajyzzpven Uec Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm Crjdoma Dkfspfx An Uoc engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Csdpeyt Slwefx An Ujrc Serial No. 253 Spindle speed: 2800 rpm 12-position tool turret Equipped with driven tools Power: 46 kVA

Condition: new, All stainless steel Hopper capacity: 2500 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 25 KW Installation dimensions of machines in cm: Crsdpfx Ajunaltsn Usc Width: 215 Length: 235 Height: 225

Condition: good (used), Year of construction: 1992, functionality: fully functional, Manufacturer: BOSCH Tip: SVZ 2500 A Maximum bag length: 400 mm Minimum bag length: 100 mm Credpforrv T Iox An Ujc Maximum bag width: 250 mm Minimum bag width: 90 mm Maximum output: 80 bags/min

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area Crsdowkf Ihjpfx An Uoc - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: new, Year of construction: 2020, functionality: fully functional, empty load weight: 135 kg, tank capacity: 500 l, pressure (max.): 6 bar, NEW! Packed!!! Dimplex standing buffer tank PSW 500, Universal buffer tank for sale in several pieces Nominal capacity 500 l, PU insulation (2.4 kWh/24h = 100 W), with three 1.5" sleeves for immersion heaters (up to CTHK 635) with two 2.5" heating water connections Codpfsw Hcdljx An Usrc with DN 180 flange for installing RWT 500 finned tube heat exchanger with three adjustable feet Inclination angle 2.08 m Operating pressure 6 bar Height: 1950 mm Inclination size: 2045 mm Diameter: 700 mm Weight 135 kg Visszajelzés küldése Oldalsó panelek Előzmények Mentve

Condition: new, Year of construction: 2026, Your contacts in our company Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in delivery: 01x End Frame Extension, new Version: Universal Material color: RAL 5010 Gentian Blue Total height: 650 mm Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Perforation grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.83 kg each Cededd Ev Nopfx An Ujrc Our services at a glance: (Prices upon request) - Assembly, installation Our general assembly terms and conditions apply - Rack inspection Inspection of racking systems according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all rack systems - Delivery with our own fleet (Without unloading) Shipping costs upon request!

Condition: new, Year of construction: 2026, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in delivery: Crjdpfx Aodd Ewben Usc 01x Upright extension, new Design: Universal Material color: RAL 1018 Zinc Yellow Total height: 650 mm Usable height: 500 mm Telescopic: 600 – 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle bracket Perforation pattern: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.52 kg / each Our services at a glance: (Prices on request) - Assembly and installation Please observe our general installation terms and conditions - Racking inspection Rack inspection according to DIN EN 15635, carried out in compliance with the requirements of BGR 234 visual inspection for all racking systems - Delivery with our own fleet (without unloading) Shipping costs on request!

Condition: good (used), Technical specifications for the pallet rack crossbeam: Shelving system: Stow Type: Pal Rack NS Cjdewaghnspfx An Usrc Included in delivery: 1x pallet rack crossbeam, used Material color: RAL 2004 orange Box profile: 80 x 50 mm Crossbeam type: PNB0488 Hooks: 4 HK (hook) Clear width: 2,500 mm Max. load per pair of crossbeams: 1,000 kg with evenly distributed load 2x locking pins, used Design: fully galvanized To secure the longitudinal beams against accidental lifting Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you a used pallet rack beam the manufacturer Redirack for sale at. Technical specifications of the pallet shelf traverse: Shelf system: Redirack Included in the scope of delivery: 01 x pallet shelf beams, used Material color: orange Box profile: 160 x 50 mm Credpfxodyqg Ej An Usc Clearance: 3,610 mm maximum load per pair of traverse 3,500 kg, at gleichm. distributed load 02 x used locking pins, Execution: compl. zinc-plated To secure the beam against unintentional lifting Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: N07/09, !!! SALE TO THE HIGHEST BIDDER !!! MBO Folding Machine T500-1-500/4F – 4 Buckle Plates – Industrial Folding Machine For sale is a folding machine manufactured by MBO Group, model T500-1-500/4F. This machine is ideally suited for print shops, lettershops, and finishing operations for the folding of brochures, leaflets, inserts, and other printed products. The robust construction of MBO folding machines ensures precise folding results, high reliability, and durable industrial quality. The buckle plate system enables a wide range of fold types to be carried out quickly and efficiently. Technical Data Manufacturer: MBO Group Model: T500-1-500/4F Machine Number: N07/09 Wiring Diagram: 35.1901.14 Folding System: Buckle Plate Folding Machine Number of Buckle Plates: 4 Codeyuc Ryopfx An Ujrc Max. Working Width: approx. 500 mm Application Area: Folding of printed products Possible Applications Brochures Flyers Inserts Folders Multi-page printed materials Condition Used, condition appropriate to age. Inspection Inspection of the machine possible by appointment. Further information available upon request.

Condition: new, Siemens 6GF3440-1CD10 MV440 SR optical reader E Stand 5 incl. software V7.0 SN:SVPK5002262, unused in opened original packaging, 100% functional, scope of delivery as per photos Crsdpfx Aoxagtnen Uec

Condition: new, Siemens 6ES7647-6MD23-0FJ0 SIMATIC BOX PC 840 V2, SN: SVPV5005661, unused in opened original packaging, 100% functional, scope of delivery as per photos. Crodpfx Ajx Dxanen Usc

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Crjdpfx Aexqr D Ten Uoc

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, operating hours: 25,350 h, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 120, number of spindles: 1, spindle nose: BT50, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, Tool breakage option included Csdpjtqfk Njfx An Usrc 7-pallet carousel NC FANUC MF-M6

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Codpoxqt Tisfx An Usrc