Used Myref My-Zb26-Tfd for sale (630)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Fgedjflpmqepfx Adref User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Fedpfx Adjfz A D Nsregf The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Year of construction: 2002, Single-head wire-stapling machine (“Klopfer”) for block, booklet and optional ring-eyelet stapling Quick changeover between block and saddle-stitch stapling Hohner’s signature wedge cut for optimal wire alignment. Technical specifications • Stapling capacity: up to 203 staples/minute • Number of stapling heads: 1 • Max. stapling thickness: 25 mm (folded), 40 mm (double-sided) • Ring-eyelet stapling: up to 3 mm (optional) • Round stapling wire: No. 21–30 (0.80–0.35 mm) • Flat staples: 0.70×0.35 to 0.96×0.78 mm • Stapling table size: 700 × 240 mm • Insertion depth: block stapling 95 mm, saddle stapling 290 mm • Working height: 880 mm Fgedpfx Adeyv Eyzjref • Motor power: 0.55 kW • Voltage: 230/400 V, 50 Hz • Overall height: 1540 mm • Footprint: 900 × 700 × 1540 mm • Weight: 200 kg (net), 240 kg (gross) • Noise emission: < 82 dB(A) Applications • Brochures • Pads • Calendars • Pads Available at short notice

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Fjdpey Hqyhofx Adrogf Coolant through spindle Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 800 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 510 mm, total height: 3,023 mm, overall weight: 6,864 kg, spindle speed (max.): 15,000 rpm, tool weight: 8,000 g, product length (max.): 3,040 mm, number of axes: 5, This 5-axis Kitamura Mycenter-4XT was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 15,000 rpm and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining centre we have for sale. Contact us for further details. • Control unit: Mitsubishi Arumatik (Fanuc compatible) • Availability: Immediately available • Z-axis travel: 510 mm • Table diameter: 400 mm • Spindle hours: approx. 11,000 h Fgodpfx Adjy Idclorjf • Max. tool length: 300 mm • Tool change time: 2 s • Power supply: 58 kVA Additional equipment • 5th axis with 400 mm rotary table • 2-speed ZF gearbox on spindle • Through-spindle coolant (low pressure), high-pressure ready • 3D probe • Tool measurement system • Chip conveyor (screw + lifting type) • Approx. 30 tool holders included Technical Specification Taper Size BT 40

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 07/2026, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, a different engine, different dimensions, or something else? Please do not hesitate to contact us. We offer financing and leasing at attractive conditions – also for the Netherlands, Austria, and for new businesses! ----VEHICLE * New model MY26 * Wheelbase: 3750 mm * Double cab * Manual transmission * Twin tires, rear axle * Gross vehicle weight 7.0 tons SEATING * Fabric seat covers * 4-seater bench in the passenger compartment ELECTRICS/LIGHTING ConnectivityBox 4G * Daytime running light function * Event data recorder * Digital tachograph, EU standard 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * Trailer socket 12V, 13-pin CAB EXTERIOR Mirrors for body width 2350 mm * Wide wheel arch covers * Blind spot radar behind the cab * Fuel filler neck in the B-pillar * Lane change assistant, passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front obstacle detection (MOIS) * Proactive lane keeping assist (ELK) * Autonomous emergency braking system (AEBS) with City Brake * Electrically adjustable and heated exterior mirrors * Splash guards on front axle * Additional vehicle key, with remote control CAB INTERIOR/AUDIO Extended driver attention warning system * Central locking with remote control * Grab handle on A-pillar * Traffic sign recognition with intelligent speed assist (ISA) * Electric windows for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with seatbelt pretensioners * Preparation for alcohol interlock * Speed limiter 90 km/h * Storage compartment above windshield * Smoker's package, ashtray and cigarette lighter * 12V connection for windshield OBU CHASSIS Spare wheel storage at the end of the frame * AdBlue tank 20 liters under the cab * Trailer load 3.5 t * Weight variant 2500/5350 kg * Spare wheel, same dimension as vehicle tires * Rear underrun protection * ESP system * Steel rims * Fuel tank 90 liters, integrated * Parking brake, manual, center-mounted * Standard suspension, front axle * Trailer coupling, ball-type ENGINE/TRANSMISSION/AXLES * Preparation for auxiliary drive * Rear axle ratio i 4.23 * Standard oil pan * Aluminum radiator * Emission standard EURO VI E * Heated crankcase ventilation * Standard starting strategy * Engine speed 3500 rpm Fjdpfxjy Nuvxs Adrjgf * Diesel particulate filter * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort noise insulation * Manual transmission FT 50.6 * Generator 3500 Watt (14 Volt x 250 Ampere) * Operating manual in German * 4x2 MY24 * Generic tire * Tire size 225/75 R 16 All Season * Operating and maintenance manual, electronic COMFORT PLUS USB socket, driver and passenger side * My Iveco infotainment 10 inch with navigation * Alexa voice assistant integrated * Passenger seat bench with multi-functional storage and stowage compartment * Fog lights * Air conditioning with automatic climate control, pollen filter, and outside temperature display * Adaptive cruise control (ACC) * Air conditioning compressor 170ccm * Comfort headrests WINTER * Seat heating for heated seats * Auxiliary water heater * Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, heated * Heated windshield

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 07/2026, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 2,800 mm, loading space width: 2,200 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, engine type, dimensions, or other features? Please feel free to contact us. We offer financing and leasing at attractive terms – also for the Netherlands, Austria, and for start-up companies! ----VEHICLE * New model MY26 * Wheelbase: 3750mm * Double cab * Manual transmission * Twin tires, rear axle * Gross vehicle weight 7.0 tons EQUIPMENT * Seat covers in fabric * 4-seater bench seat in the passenger compartment ELECTRICAL/LIGHTING ConnectivityBox 4G * Daytime running light switch * Event data recorder * Digital tachograph, EG, 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * Trailer socket 12V 13-pin CAB EXTERIOR Mirror for body width 2350 mm * Wide wheel arch trim * Blind spot radar behind the cab * Fuel filler neck in the B-pillar * Turning assistant, passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front monitoring system (MOIS) * Proactive lane keeping assist (ELK) * Emergency braking assistant AEBS with City Brake * Exterior mirrors, electrically adjustable and heated * Splash guards on the front axle * Additional vehicle key with remote control CAB INTERIOR/AUDIO Extended driver attention warning system (Advanced Driver Distraction Warning) * Central locking with remote control * Grab handle on the A-pillar * Traffic sign recognition with intelligent speed assistant (ISA) * Electric windows for front door * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with seat belt pretensioners * Preparation for alcohol interlock * Speed limiter 90 km/h * Roof storage compartment above the windshield * Smoker's package, ashtray and cigarette lighter * 12V socket for windshield OBU CHASSIS Spare wheel storage at the end of the frame * AdBlue tank 20 liters under the cab * Trailer load 3.5 t * Weight variant 2500/5350 kg * Spare wheel, size corresponds to vehicle tires * Underrun protection, rear * ESP system * Steel wheels * Fuel tank 90l integrated * Parking brake, manual, center * Standard suspension, front axle * Trailer coupling, ball head ENGINE/TRANSMISSION/AXLES * Preparation for auxiliary drive * Rear axle ratio i 4.23 * Standard oil pan * Radiator in aluminum * Emission standard EURO VI E * Crankcase ventilation, heated * Starting strategy standard Fsdpey Nuvrjfx Adrjgf * Engine speed 3500/min * Diesel particulate filter * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort noise insulation * Manual transmission FT 50.6 * Generator 3500 Watt (14 Volt x 250 Ampere) * Printed documentation in German * 4x2 MY24 * Generic tire * Tires 225/75 R 16 All Season * Operating and maintenance manual, electronic COMFORT PLUS USB socket on driver and passenger side * My Iveco infotainment system 10 inches with navigation * Alexa voice assistant integrated * Passenger seat bench with multi-functional storage compartment * Fog lights * Air conditioning with automatic climate control, pollen filter and outside temperature display * Adaptive cruise control (ACC) * Air conditioning compressor 170ccm * Comfort headrests WINTER * Seat heating for heated seats * Auxiliary hot water heater * Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, heated * Windshield heating

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 07/2026, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 2,800 mm, loading space width: 2,200 mm, loading space height: 1,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, engine, dimensions, or additional features? Please feel free to contact us. We offer financing and leasing at attractive conditions – also for the Netherlands, Austria, and for new businesses! ----VEHICLE * New model MY26 * Wheelbase: 3750mm * Double cab * Manual transmission * Twin tires on rear axle * Gross vehicle weight 7.0 tonnes EQUIPMENT * Seat covers in fabric * 4-seater bench in the passenger compartment ELECTRICAL/LIGHTING ConnectivityBox 4G * Daytime running light * Event data recorder * Digital tachograph (EU) 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for superstructure lighting * Trailer socket 12V 13-pin CAB EXTERIOR Mirrors for body width 2350 mm * Wide wheel arch trim * Blind spot radar behind the cab * Fuel filler neck in the B-pillar * Turning assistant, passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front area monitoring (MOIS) * Proactive steering assistant with lane keeping assist (ELK) * Emergency braking assistant AEBS with City Brake * Exterior mirrors, electrically adjustable and heated * Splash guards on front axle * Additional vehicle key with remote control CAB INTERIOR/AUDIO Extended driver attention warning system * Central locking with remote control * Grab handle on A-pillar * Traffic sign recognition with intelligent speed assist (ISA) * Electric windows for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with seatbelt pretensioners * Preparation for alcohol interlock * Speed limiter 90 km/h * Roof shelf above windshield * Smoker's package, ashtray and cigarette lighter * 12V connection for windshield OBU CHASSIS Spare wheel storage at the end of the frame * AdBlue tank 20 liters under the cab * Trailer load 3.5 t * Weight variant 2500/5350 kg * Spare wheel, dimension corresponds to vehicle tires * Underrun protection, rear * ESP system Fjdoy Nuw Ajpfx Adregf * Steel rims * Fuel tank 90l integrated * Parking brake, manual, centrally located * Standard suspension, front axle * Trailer coupling, ball hitch ENGINE/TRANSMISSION/AXLES * Preparation for auxiliary drive * Rear axle ratio i 4.23 * Oil pan, standard * Radiator in aluminum * Emission standard EURO VI E * Crankcase ventilation, heated * Start-up strategy, standard * Engine speed 3500/min * Diesel particulate filter * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort noise insulation * Manual gearbox FT 50.6 * Generator 3500 watts (14 volts x 250 amps) * Printed manual in German * 4x2 MY24 * Generic tire * Tire size 225/75 R 16 All Season * Operating and maintenance manual, electronic COMFORT PLUS USB socket, driver and passenger side * My Iveco infotainment system, 10 inches with navigation * Voice assistant Alexa integrated * Bench seat for passenger with multifunctional storage and stowage compartment * Fog lights * Air conditioning with automatic climate control, pollen filter and outside temperature display * Adaptive cruise control (ACC) * Air conditioning compressor 170ccm * Comfort headrests WINTER * Heated seats * Auxiliary water heater * Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, heated * Windshield

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 07/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Are you looking for a different model, a different engine, different dimensions, or something else? Please feel free to contact us. We offer financing and leasing at attractive conditions – also for the Netherlands, Austria, and for new businesses! ----Vehicle: IVECO Daily 70C18 * 176 hp (129 kW) Euro VI-E diesel engine * HI-MATIC 8-speed automatic transmission * Wheelbase: 4,100 mm * Rear-wheel drive * Twin tires on rear axle * Permissible total weight: 7,000 kg * Air suspension rear axle * Standard suspension front axle * C-profile steel ladder frame Fsdoy Nuwispfx Adrogf * Rear axle ratio i = 4.23 * Fuel tank 90 liters * AdBlue tank 20 liters * Tires 225/75 R16 all-season tires * Steel rims Technology / Comfort:?Luxury driver's seat * Hydraulically suspended driver's seat * Seat heating driver * Armrest driver's seat * Lumbar support driver's seat * Rear wall insulation * Cab rear wall with window * Roof storage compartment above the windshield * Electrically adjustable and heated exterior mirrors * Electric windows * Central locking with remote control * Light and rain sensor * High beam control * Comfort noise insulation * Grab handle on the A-pillar * Seat covers fabric * Body manufacturer interface * CAN-BUS 2.0B * Electrical preparation for tail lift * Switch for body lighting * Trailer socket 12V / 13-pin * Reversing camera * Additional vehicle key with remote control * 12V connection for windshield OBU * Smoker's package * Battery 12V / 105 Ah (AGM) * Generator 3,500 watts (250 A) * Aluminum radiator * Heated fuel filter * Heated crankcase ventilation * Diesel particulate filter * HVO/GTL fuel approval * Exhaust pipe center below vehicle Safety: ESP * AEBS + City Brake * Turning assistant (BSIS) * Blind spot radar * Front area monitoring (MOIS) * Proactive lane keeping assist (ELK) * Traffic sign recognition (ISA) * Extended driver attention warning * Front airbags driver & passenger * Seat belt pretensioner passenger * Seat belt warning system driver & passenger * Tire pressure monitoring system (TPMS) * Speed limiter 90 km/h * Additional speed limiter * Daytime running lights * Accident data recorder * Warning triangle * First aid kit * Hazard warning flasher * Preparation for alcohol interlock * Wheel chocks (2 pieces) * Side marker lights * Splash guards front axle COMFORT PLUS package:?10" MyIVECO infotainment with navigation * Alexa voice assistant * USB sockets driver and passenger side * Passenger seat bench with multifunctional storage and storage compartment * Fog lights * Automatic climate control * Pollen filter * Outside temperature display * Adaptive cruise control (ACC) * Air conditioning compressor 170 ccm * Comfort headrests STYLE package:?Full-LED headlights * Leather steering wheel * Radiator grille with chrome inserts Infotainment:?AIR PRO controls * Connectivity Box 4G * Digital tachograph 4.1 Other: White (IC 194) * Daily model year 2026 * Homologation goods transport * Easy Daily app * Vehicle monitoring & remote assistance * Over-the-air updates * Electronic operating and maintenance manual (Iveco Easy Guide) Refrigerated box: * Insulation 80mm/100mm * Floor surface non-slip * Floor reinforced * Two rear doors with separate locking and 270° opening angle * Side door with separate locking and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing straps * Interior and exterior lighting LED * Roof spoiler * Drain holes

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 07/2026, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 2,800 mm, loading space width: 2,200 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, different engine, different dimensions, or something else? Please feel free to contact us. We offer financing and leasing at attractive conditions - also for the Netherlands, Austria, and for new businesses! ----VEHICLE * New model MY26 * Wheelbase: 3750mm * Double cab * Manual transmission * Twin tires on rear axle * Gross vehicle weight 7.0 tons UPHOLSTERY * Fabric seat covers * 4-seater bench in the passenger compartment ELECTRICS/LIGHTING ConnectivityBox 4G * Daytime running light function * Event data recorder * Digital tachograph (EU standard) 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * Trailer socket 12V 13-pin CAB EXTERIOR Mirrors for body width 2350 mm * Wide wheel arch trim * Blind spot radar behind the cab * Fuel filler neck in B-pillar * Turning assistant passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front detection system (MOIS) * Proactive steering assistant with lane keeping assist (ELK) * Emergency brake assist AEBS with City Brake * Electrically adjustable and heated exterior mirrors * Splash guards on front axle * Additional vehicle key with remote control CAB INTERIOR/AUDIO Extended driver attention warning system (Advanced Driver Distraction Warning) * Central locking with remote control * Grab handle on A-pillar * Traffic sign recognition with intelligent speed assist (ISA) * Electric windows for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with seatbelt pretensioners * Preparation for alcohol interlock system * Speed limiter 90 km/h * Roof storage compartment above windshield * Smoker's package, ashtray and cigarette lighter * 12V connection for windshield OBU CHASSIS Spare wheel storage at the end of the frame * AdBlue tank 20 liters under the cab * Trailer load 3.5 t * Weight variant 2500/5350 kg * Spare wheel, dimension corresponds to vehicle tires * Rear underrun protection * ESP system * Steel rims * Fuel tank 90l integrated * Parking brake manual, centrally located * Standard suspension, front axle * Trailer coupling ball head ENGINE/TRANSMISSION/AXLES * Preparation for auxiliary drive * Rear axle ratio i 4.23 * Oil pan standard * Radiator in aluminum * Emission standard EURO VI E * Crankcase ventilation heated * Start strategy standard * Engine speed 3500/min * Diesel particulate filter * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort noise insulation * Manual transmission FT 50.6 * Generator 3500 Watts (14 Volt x 250 Ampere) * Operating instructions in German * 4x2 MY24 * Generic tire * Tires 225/75 R 16 All Season * Operating and maintenance manual electronic COMFORT PLUS USB socket on driver and passenger side * My Iveco infotainment 10 inches with navigation * Voice assistant Alexa integrated * Bench seat for passenger with multi-function storage and stowage compartment * Fog lights * Air conditioning with automatic climate control as well as pollen filter and outside temperature display * Adaptive cruise control (ACC) * Air conditioning compressor 170ccm * Comfort headrests Fgjdjy Nuvlspfx Adrjf WINTER * Seat heating for heated seats * Auxiliary hot water heater * Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, heated * Windshield heater

Condition: good (used), Year of construction: 2001, Fanuc control Box type guideway structure Clamping tower on pallet Machine is stocked in our Bulgaria showroom Fgjdpfx Asnyh Sfedrof IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Year of manufacture: 2011 Fsdpfxexg D A Ho Adrogf

Condition: used, Year of construction: 2001, Vertical machining center Daewoo MYNX 500 Control type: Heidenhain 426 Table dimensions: 1200 mm x 500 mm Fedpjypakmofx Adrogf Travel: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 625 mm Tool magazine: 30 positions Spindle speed: 80-8000 rpm Through-tool coolant / high pressure Tool taper: ISO 40 mm Motor power: 12/16 kW Rapid traverse: 24 m/min Handwheel control Brand new automatic chip conveyor by LNS Year of installation: 2001 CE Weight: 7,500 kg Complete with all documentation

Condition: good (used), functionality: fully functional, machine/vehicle number: G1850438, operating hours: 675 h, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 220 V, input current: 7 A, table width: 390 mm, table length: 490 mm, Stratasys J850 Digital Anatomy – professional PolyJet 3D printer for medical and anatomical models For sale is a Stratasys J850 Digital Anatomy, a high-quality industrial PolyJet 3D printer for realistic medical, anatomical, and functional models. This machine is ideally suited for clinics, medical device companies, research institutions, universities, dental/medical laboratories, and service providers in the field of 3D printing and prototyping. The J850 Digital Anatomy enables the printing of complex models with multiple materials, colors, and Shore hardness values in a single print job. This makes it possible to represent anatomical structures such as bones, vessels, tissues, organs, and transparent areas in a particularly realistic manner. Typical applications include surgical planning, training, demonstration models, product development in the medical technology sector, and patient-specific models. Technical specifications / Additional information: Total printing time: 675 hours Technology: PolyJet / Multi-material 3D printing Layer thickness: up to 14 µm Multi-material printing with up to 7 base materials Full-color and transparent printing possible Software: GrabCAD Print / GrabCAD Voxel Print Network connection: LAN / TCP-IP Suitable for Digital Anatomy materials such as TissueMatrix, BoneMatrix, GelMatrix, and other PolyJet materials Condition / Storage notes: The machine is currently disassembled. Before disassembly, it was professionally flushed by Stratasys to prevent clogging or drying out of the print heads. As a result, the machine is properly prepared for transport or storage. Special features: Realistic haptics and appearance of anatomical models Very high level of detail and fine surface quality Printing of flexible, rigid, transparent, and colored areas in a single model Fsdpfxoy Urwws Adrsgf Ideal for medical training, surgical preparation, and product development Industrial Stratasys quality Large build volume for complex models and small production runs Professionally flushed and prepared for transport/storage This machine is particularly interesting for users who want to produce high-quality medical models, demonstrators, implant/instrument prototypes, or realistic training models. Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with the exclusion of any liability for defects/warranty. No guarantee is provided. Errors and prior sale excepted. Inspection possible by appointment. Sale is ex-works.

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) Fgedpfx Asy H H Afodrsf * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame 6” chuck Chip conveyor

Condition: good (used), Hohner Economy 25/40 – 15/25 – 25 stitching machines Fgsdpfx Adoh Um Nlorof in good condition, immediately available.

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 10,000 rpm, Vices are not included in the scope of delivery! Fgodpfxjxb Dyhs Adrsf

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Fedpfohfv D Sex Adrogf Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Condition: used, Year of construction: 2016, Machine in good operational condition and always serviced by the OEM (yearly maintenance). Machine available end January 2026.  Fedpfexfrx Tox Adregf Magazines/Feeders also available - please look at the picture for the list.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 346 h, number of axes: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details. Fgjdpfxeym T Its Adrof • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max turning diameter: 508 mm • Max turning length: 560 mm • Max part diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max driven tool speed: 5000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Main spindle max speed: 4500 rpm • Sub-spindle max speed: 6000 rpm • Synchronous spindle speed: 2500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar capacity: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short circuit rating: 5 kA RMS symmetrical • Interrupt capacity: 10000 A • Max ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7500 kg • Transport weight: 8250 kg • The BMT65 mounts are included; swivel mounts are not.

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: OKUMA, controller model: OSP - P300L, number of axes: 4, This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information. Additional equipment • Bar Loader: Iemca Master mod. 880 33 P/R • Automatic Presetting: Yes • Gear Machining Software and Tools: Yes • Accessories: Chip Evacuator Machine Benefits Technical Machine Benefits • Max. Workable diameter: Ø 400 mm • Max. Workable length: 500 mm • Type: cnc lathe Fgedpfeyalp Aox Adrof • Condition: used • State: optimal Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, machine/vehicle number: UP 300 E, test test Fjdoym Urmopfx Adrjgf

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 40543, travel distance X-axis: 425 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, TECHNICAL DETAILS X-axis: 425 mm Y-axis: 425 mm Z-axis: 400 mm Pallet size: 300 x 300 mm Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 0–10,000 mm/min Tool Magazine Capacity: 100 ATC Spindle speed: 10,000 rpm Tool diameter: 95 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Max. tool weight (with tool holder): 10 kg Tool change time: 1.7 s Chip-to-chip time: min. 7 s Control: Fanuc 15M Pallet indexing: Full 4th axis MACHINE DETAILS Installation dimensions: approx. 3,690 x 4,614 x 2,475 mm Transport dimensions of the machine: 2.4 x 3.80 x 2.8 m Connected load: 20 kVA Phases: 3 Frequency: 50/60 Hz Fsdpfexnwkgex Adregf EQUIPMENT - Chip conveyor - Through-spindle coolant Note: The robot is equipped with 40 pallets. Spare pallets are also available.

Year of construction: 2001, condition: used, machine/vehicle number: AV5E0888, 3-axis vertical machining center DAEWOO MYNX 500 HEIDENHAIN 410 Accessories: Chip conveyor with belt Remote electronic handwheel Automatic high-pressure coolant system through the spindle line Fgsdpfxegay Ius Adrjf

Condition: used, Year of construction: 2004, functionality: fully functional, Glass thickness: 3 ÷ 40 mm Minimum operating height of sanding belt: 50 mm Minimum size of workpiece: 70x70 mm Installed power: 20 kW Minimum compressed air pressure: 6 bar Max compressed air consumption: 25 Nlt/min Length: 7043 mm Fgedpfx Asxyv Riodrsf Width: 1890 mm Height: 2300 mm Conveyor load capacity: 200 kg/m Weight: 2800 kg Processing speed: 0.5 ÷ 5 m/min Water tank capacity: 720 l Additional technical data can be provided electronically.