Used Oerlikon Citochromax N for sale (52,176)

Condition: good (used), cutting width 300 mm Cutting height 85 mm Motor output 1,5 kW saw-blade dia. 300 mm Psdpfx Asyiu Sfjntept connected load frequency 380 V

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small, high-precision Swiss manual lathe with a center height of 102mm, a center distance of 400mm, and a spindle bore of 20mm. Podpfx Answqxcxstjpt One machine is available (with a long bed and gear head); it is already equipped with an electrical panel and has been repaired to meet current standards. Equipment and condition are as shown in the photos.

Condition: new, Year of construction: 2026, New Kaeser after-compressor N153-G (10/40) with ball valve and pressure switch on the inlet side with ball valve and pressure switch on the outlet side with check valve Time of delivery: 6 Wochen Technical Data:Inlet pressure: 10 bar Outlet pressure: 40 bar Pressure ratio: 3.7 Flow rate: 0.89 m³/min Min. ambient temperature: 2 °C Max. ambient temperature: 40 °C Compressor block speed: 650 rpm Number of cylinders: 2 Rated power of drive motor: 4.0 kW Efficiency class of drive motor: IE3 Protection class of drive motor: IP 55 electrical supply: 400 V / 3 / 50 Hz Sound pressure level: 74 dB (A) Compressed air connection on the inlet side: G 3/4" Compressed air connection on the outlet side: G 1/2" Dimensions W x D x H: 1390 x 720 x 820 mm Weight: 255 kg Ppsdpewl Icdsfx Antjt Visit our store.We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Pedpszaaqzofx Antjpt Compressed air outlet connection: G 1/2" Visit our store.We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2007, operating hours: 819 h, machine/vehicle number: G320-00-6069, fuel type: diesel, Empty weight: 31.200 kg Lifting capacity: 1.000 kg Working height: 3.400 cm Front tyres / undercarriage remaining: 70 Ppedpfexwix Isx Antet Rear tyres remaining : 70 Tyre brand: Wide Wall Transport dimensions (LxWxH): 7.02x2.98x3.63 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 5,222 h, machine/vehicle number: B195-02-6078, fuel type: diesel, Empty weight: 12.400 kg Lifting capacity: 500 kg Ppodsymi T Sjpfx Antot Working height: 2.150 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Transport dimensions (LxWxH): 4.73x2.44x3.65 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 3,596 h, machine/vehicle number: G320-00-6364, fuel type: diesel, Empty weight: 31.200 kg Psdpfx Aney Hz R Retept Lifting capacity: 1.000 kg Working height: 3.400 cm Dimensions of cargo space: 702 x 298 x 363 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: Wide Wall Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 85 h, machine/vehicle number: N140.00.6859, Drive: Wheel Empty weight: 7.550 kg Lifting capacity: 750 kg Working height: 1.600 cm Ppjdpfxotr I Nqj Antst Transport dimensions (LxWxH): 3.75x1.2x2.45 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2014, operating hours: 2,201 h, machine/vehicle number: B195.03.7090, fuel type: diesel, Empty weight: 11.990 kg Lifting capacity: 500 kg Working height: 2.150 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Wide Wall Transport dimensions (LxWxH): 4.84x2.44x3.65 Please contact PFEIFER GROUP for more information Ppjdpfjycpraox Antot

Condition: used, Year of construction: 2006, operating hours: 573 h, machine/vehicle number: B195-02-5905, fuel type: diesel, Empty weight: 12.280 kg Lifting capacity: 500 kg Working height: 2.150 cm Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Ppodpfx Anoyrxcaetst Transport dimensions (LxWxH): 4.73x2.44x3.65 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2006, machine/vehicle number: N165.00.6100, Empty weight: 7.985 kg Lifting capacity: 500 kg Working height: 1.850 cm Ppedpfx Anoyhliletst Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Solideal Transport dimensions (LxWxH): 3.74x1.2x3.4 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 85 h, machine/vehicle number: N140.00.6859, Drive: Wheel Empty weight: 7.550 kg Pedpfx Anox Azipjtept Lifting capacity: 750 kg Working height: 1.600 cm Transport dimensions (LxWxH): 3.75x1.2x2.45 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, machine/vehicle number: G320006515, fuel type: diesel, Empty weight: 31.200 kg Working height: 3.370 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: Wide Wall Transport dimensions (LxWxH): 7.02x2.98x3.63 Please contact PFEIFER GROUP for more information Ppsdjxu Akxjpfx Antet

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s Ppodpfx Asy Rur Nontet power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1970, Pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 700 x 500 mm Psdpfeynmn Nsx Antspt hole in the table 250 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,5 t Dimensions (WxDxH) 1,6 x 2,0 x 2,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: excellent (used), DEMAG Chain Hoist Type Pk 2 N-F Ppsdpfx Aoy Sldlontet Lifting speeds: 10 and 2.5 m/min. 380 Volt 0.5 kW Travel drive: 380 Volt 0.5 kW

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Special SCM guide system for the saw carriage. The curved design between the ball bearings and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scoring unit can be easily swung in and out from the outside; a special plate enables precise positioning. The rip fence is extremely robust and can be used for both longitudinal and mitre cuts; quick reset to the starting position. The precise flip stops allow for direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilting: 45° Max. main saw blade diameter: 300 mm Psdpfxey Nugde Antspt Max. scoring saw blade diameter: 100 mm Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4,000 rpm Scoring saw speed: 8,000 rpm Cutting width with parallel fence: 1,000 mm Extraction port diameter: 100 mm Motor: 4 kW Weight: 425 kg Availability: short notice Location: Röllbach

Condition: good (used), tire mounting machine -Plate diameter: 475 mm Pedpfxjb A Hwre Antept -pneumatic tire press -Folding arm -Weight: 208 kg

Condition: like new (used), Ue: 200–480 V AC, 3-phase, 50/60 Hz, 230 V, 5.5 kW Uc, Vs: 24 V AC/DC Application: Machine control Ppodpfxoy U D N Ss Antot Width: 45 mm Height: 150 mm Depth: 118 mm Weight: 459 g Condition: like new

Condition: like new (used), Year of construction: 2022, operating hours: 454 h, load capacity: 1,500 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Manufacturer + model: ACTIL N 15 S - TTFY Mast: 3F5400 ID: 26064.0363 Category: Demo Mast: 3F5400 Lowered height: 2400 mm Lifting height: 5400 mm Capacity: 1500 kg Year: 2022 Hours: 454 hours Pjdpfxjzaf N Nj Antspt Battery: 24v / 775ah Options: DEMO!! MINI forklift - Order picker - Counterbalance stacker (3 in 1!!) - Dual steering - Triplex - FFL mast - S.s. & spreader - Tilting fork carriage - Additional work lights - 2 x Bluespot - with cantilever forks - SUITABLE for all types of pallets POWER STEERING Complete LIKE NEW!!

Condition: like new (used), Year of construction: 2019, operating hours: 148 h, load capacity: 1,000 kg, lifting height: 3,250 mm, fuel type: electric, mast type: duplex, construction height: 2,190 mm, Manufacturer + model: ACTIL N 10 S - TFY Mast: 2F3250 ID: 23093.0147 Category: Demo Mast: 2F3250 Lowered height: 2019 mm Lifting height: 3250 mm Capacity: 1000 kg Year: 2019 Operating hours: 148 hours Battery: 24 V / 775 Ah Options: DEMO!! 3 in 1!! MINI forklift – Order picker – Counterbalance stacker Full options: - Dual steering - Duplex FFL mast - With free-carrying adjustable forklift forks Podszafnrspfx Antjpt - Suitable for all types of pallets POWER STEERING Complete LIKE NEW!!

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  Pedpowxb Erjfx Antept SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Ppsdpsy N Dvbofx Antjt Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: used, 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg GTOZP-52+ N+P 2 Color Offset Press Heidelberg GTOZP-52+ N+P Year 1992 - Serial-No. 707612N Size max. 360 x 520mm Ppsdpfsy Ndhkox Antjt Impressions 53 Mio. Dampening System Alcolor with Baldwin Plus Version - Imprint Unit Numbering & Perforation Wendung 2 Perfecting 2/0 - Manuals Included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2018, wheelbase: 5,340 mm, color: black, Year of construction: 2018, Axle Configuration Maximum front axle load: 9,000 kg Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Weights Unladen weight: 3,740 kg Payload: 23,260 kg GVW (Gross Vehicle Weight): 27,000 kg Maintenance, History and Condition Ppjdpfx Aoy U Igzontot APK (Periodic Technical Inspection): valid until 09/2026 Technical condition: very good Optical condition: very good Identification License plate: 98-WT-HV