Used Omcn Hydraulic Press 30 Ton for sale (47,550)

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical data: - max. pressing force 160 t - max. ram stroke approx. 500 mm - average working speed approx. 92 mm/s - return speed 125 mm/s - installation height approx. 1000 mm - overhang to center of ram 360 mm - ram mounting pin 40 mm - table size 900 x 630 mm Rsdozn H Rvepfx Afhscd - table bore / through-hole 220 mm - table height above floor 720 mm - oil capacity approx. 200 liters - drive 400 V / 17 kW - space requirement approx. W 1150 x H 3400 x D 1850 mm - weight approx. 7500 kg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 1,20,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Rodpfsubyrxjx Afhocd Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: used, Year of construction: 1967, functionality: fully functional, overall weight: 1,20,000 kg, total height: 5,600 mm, pressing force: 315 t, air pressure: 6 bar, distance between side stands: 1,300 mm, stroke length: 180 mm, table length: 1,280 mm, table width: 800 mm, Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Redpfx Aozh Ilbofhscd Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 3600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Equipment Rjdpoy T R Ryefx Afhocd • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. A live demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 200 mm, retraction force: 10 t, overall weight: 5,700 kg, operating pressure: 250 bar, installation height: 450 mm, pressure: 250 bar, We offer this used Lauffer RPT100 hydraulic press, year of manufacture 1992. Machine type: RPT100 Machine no.: 14161 Year of manufacture: 1992 Rcodjywiyuepfx Afhsd Weight: 5,700 kg Maximum pressing force top ram: 1,000 kN Maximum pressing force bottom ram: 100 kN Retraction force top ram: 100 kN Retraction force bottom ram: kN Maximum stroke top ram: 200 mm Maximum stroke bottom ram: 80 mm Maximum operating pressure: 250 bar Shut height: 450 mm Overrun stroke: 20 mm Overrun time: 84 ms Safety distance: 134 mm For sale is a hydraulic high-speed press from the quality manufacturer Maschinenfabrik LAUFFER GmbH & Co. KG. Technical specifications: Manufacturer: LAUFFER Designation: Hydraulic high-speed press / hydraulic down-stroke press Type: RPT 100 Year of manufacture: 1992 Factory no.: 14161 Pressing force: 1,000 kN (≈ 100 t) Operating pressure: 270 bar Stroke (ram): 307 mm Clamping area / table: 710 × 450 mm Clearance: 710 × 560 mm Distance from clamping area to ram: 450 mm Column spacing (according to card): 830 mm (width) / 280 mm (length side) Power requirement: 15 kW Pump delivery rate: 30 l/min Speed: 1,500 rpm Oil capacity: approx. 450 l Oil type: HLP 46 (DIN 51525) Condition / Inspection: Used machine from industrial stock. Inspection and collection by arrangement. Collection/logistics: Loading by crane included.

Condition: new, Year of construction: 2026, TECHNICAL DATA Rcsdpfx Aji Amnpjfhod Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: used, Year of construction: 1959, Serial No. 670/848, pressing force 150 t, travel distance 30 mm, travel time 190 ms, light curtain, manufacturer SICK, type LVU 1106-0021 Redpfxezkav Ds Afhocd +++ Attention: This machine is part of an online auction! +++

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC Rsdezp Ex Uopfx Afhjcd - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: new, Year of construction: 2025, functionality: fully functional, Jacking , Hydraulic drilling Hydraulic jacking machine used to make passages under roads , tracks , entrances , sidewalks and other terrain obstacles to lay telecommunications , water and sewage and electrical installations . Installations are laid in a way that does not damage the pavement. Basic advantages: 1/ High power of the device up to 32 tons 2/ Length of jacking up to 150 mb /depending on the ground/. 3/ Small dimensions and weight 4/ Possibility of power supply from excavator, mini-excavator, hydraulic unit, agricultural tractors, HDS equipment, Rcedpfx Aou Hylxsfhed 5/ Simple operation 6/ Ability to pull in several pipes simultaneously 7/ Does not require servicing Complete set ready to work includes: 1)Hydraulic jacking machine 2)Supply hoses 10 m.b. 3) Widening heads 80,110,130 5) Rods quantity 10 mb Basic technical data: 1- Standard dimensions -890x550x450 mm 2-Weight depending on the model from 150 kg to 350 kg 3-Pushing force 32 tons 4-Pulling force 24 tons 5-Maximum diameter of the installed pipe 300 mm (depending on the ground) I invite you to contact me by phone for more information.

Condition: new, pressure 100 t Rcodpfx Afoxabcwohsd stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 380 A, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table length: 1,320 mm, table height: 290 mm, throat depth: 180 mm, ram plate length: 500 mm, clearance between the columns: 900 mm, retraction force: 40 t, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,500 kg, controller model: Estun NC E21, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. Redpezlqkuefx Afhocd The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: used, Technical details: pressure: 160 t Rcodpou Nfpujfx Afhsd table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm ram surface area: 700 x 360 mm throat: 300 mm weight of the machine approx.: 9000 kg dimensions L x W x H: 3,7 x 1,5 x 2,2 m distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) *

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm Rjdszkl Huspfx Afhscd table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: used, Year of construction: 2026, total length: 4,000 mm, total width: 2,100 mm, total height: 2,050 mm, Colour: White Empty weight: 4.020 kg - Year: 2026 - Documentation available: Yes Rjdjzkr Tbspfx Afhecd - └ Type Documentation: Technical data, Electrical diagrams, User manual - └ Language: EN - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: Yes - Main motor power [kW]: 2.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 400 - Total stroke [mm]: 400 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Assembled panel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Total pressure [Ton]: 70 - Working pressure [kg/cm²]: 2 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Transport dimensions: 4000mm x 2100mm x 2050mm (l x w x h) - Transport weight [kg]: 4020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW Rjdpfx Aezhlg Asfhecd • Year of manufacture: 2023 • Serial number: H300SV23-17 Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Rcsdpfxsudph Ij Afhed

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Redpfxjy H Rdgj Afhocd Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), I sell a Lukas baler in very good condition. Rjdpfxoum Htzo Afhocd

Condition: new, pressure 30 t Rcodpfx Aoy Nnywsfhed stroke 170 mm distance spindle /table max. 700 mm Front light range 600 mm Lateral light range 195 mm weight of the machine ca. 200 kg dimensions 670 x 970 x 1900 mm Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: ready for operation (used), Year of construction: 1992, Available immediately from our location: Hydraulic single-column press, Edelhoff Rsdpfjznhw Djx Afhscd Type HEP 45 Year of manufacture 1992 Machine complies with the latest UVV regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive power 7.5 kW Weight 6 tons 4 guide pins of the upper ram are broken. These need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 3,000.00 plus VAT, ex works.

Condition: used, Year of construction: 1988, Immediately available from the racing department: Rsdpfxeznhwwj Afhjcd Hydraulic four-column press, Hymag Type HS 4 – 160 k Year of manufacture 1988 Rebuilt to meet the latest occupational safety standards in 2020 Pressing force 160 tons Table size 1500 x 850 mm Stroke 500 mm Drive power 11 kW Weight 7 tons

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe Rcodpfx Afjzk H A Dshed • 2 supports, front

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment Rcodpfjp Dt Uujx Afhed

Condition: new, Technical Specifications: Capacity: 200 t Installation height: 900 mm Max. working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 6.4 mm/s Redjpl T Dijpfx Afhocd Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight (approx.): 2600 kg Equipment features: - Laterally adjustable cylinder via rack, pinion, and handwheel - Generously dimensioned working area - Height-adjustable table - Torsion-resistant welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Your benefits: - Among the heaviest-duty models on the market - Available in capacities up to 500 tons - Maximum performance and stability - Various table widths available upon request - Horizontally freely positionable hydraulic cylinder with handwheel, rack, and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.

Condition: new, Technical data: Capacity: 60 t Installation height: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Forward speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Rsdek Nz Ndspfx Afhocd Features: - Cylinder that can be shifted laterally - Generous working area - Height-adjustable table - Torsion-resistant design made of welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.