Used Omron Servo Drive for sale (24,999)

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Iisdpszzz N Hofx Ahnog Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Iodjzr Ircspfx Ahneig Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: good (used), Year of construction: 2017, Max. turning diameter 366 mm Max. turning length 510 mm Bar capacity Ø 65 mm Iisdpfozy U Nwex Ahnsg Travel ranges X / Y / Z 260 / 100 / 590 mm Main spindle 5,000 rpm Counter spindle 6,000 rpm Driven tools 10,000 rpm · 29 Nm Turret 12 stations, BMT Controlled axes X, Y, Z, C, B Machine weight 5,500 kg Connection current max. 115 A - Y-axis milling off-center, complete machining in a single setup - Counter spindle with synchronized transfer – machining the back side without re-clamping - Built-in motor turret (BMT) drive in the turret, stiffer and more thermally stable than VDI systems - Tool measuring probe for both spindles - Bar loader LNS Quick Load Servo 65 for bars up to Ø 65 mm, unmanned series production - Parts catcher and parts conveyor for gentle parts removal - Chip conveyor, high-pressure coolant supply - CELOS with ERGOline 21″ touch control panel Machine running time approx. 14,100 hours Program running time approx. 9,900 hours Machine price excluding shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Centering with 2 x 3 rollers, diameter 200 x 300 mm Drive 2 x 3 kW Centering with synchronous linkage and servo cylinder Iisdsx Eig Uopfx Ahneg The centering can optionally be equipped with an extraction device for easy tool change

Year of construction: 2015, condition: used, functionality: fully functional, Epilog Fusion 40 / 120 Watt, laser engraving and laser cutting system - 120 Watt CO2 "WaveGuide" laser source, according to the last service on August 5th, 2024, laser power 132 Watt - Working area 1016X711mm - 2" focus lens - Drive: brushless DC servo motors for crystal-clear cutting edges in acrylic glass - Max. material thickness 362mm - Max. weight of workpiece: 91kg - Laser safety class 2 - Interface: Ethernet, freely programmable IP address - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, machine LED lighting Iiodpfx Ahevvha Sonsg - Large format viewing window made of safety glass - Laser beam expansion, base frame on castors - Honeycomb cutting table - Round engraving unit for cylindrical objects with roller system Extraction: vacair UML 1350 extraction system - Recirculation system with 3 levels -Filter - Filter: particle filter HEPA H14, pre-filter cassette - Activated carbon cassette 43kg (with HEPA) - Fan output 1350 m³/h - Pressure 10,000 Pa - Separation level >99% - Suction/exhaust air nozzle DM 125mm - - Sale only to traders - Exclusion of any guarantee or warranty claims - Sale with invoice and VAT - No liability for spelling errors, typos - Sale as seen, later complaints excluded Machine in very good condition, few operating hours - Machine is very well maintained and clean New prices: Round engraving unit, built in 2019, €1840/net Laser Fusion 40 /120 watts, built in 2015, €55,000/net Vacair UML 1350 extraction system, built in 2021, €5,450/net Total: €62,300/net

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics) Iiodpfx Ahozu Ryhonog

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos Iijdpfx Aoylil Eohneg -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 480 mm, rotational speed (max.): 6,000 rpm, spindle speed (max.): 3,500 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, AXA VSC 1-1000 M/K – Vertical CNC Machining Center Technical Data Feature | Specification Manufacturer | AXA Entwicklungs- und Maschinenbau GmbH Model | VSC 1-1000 M/K Year of Manufacture | 1991 Machine Type | Vertical Traveling Column Machining Center Control | Siemens 810 M/GA3 Axes | 3 axes, prepared for 4th axis Tool Changer | Automatic Tool Interface | SK 40 DIN 69871 A / 69872 A Tool Magazine | 22-position chain magazine Travel X | 1,000 mm Travel Y | 350 mm Travel Z | 480 mm Table Size | 2,350 × 500 mm T-Slots | 3 × 14 H9 Table Load | 500 kg per 1,000 mm Working Area Height | 230 – 710 mm Distance Spindle Center – Column | 425 mm Spindle Speed | 30 – 3,000 min⁻¹ Spindle Power | 11 kW (100% ED) / 14 kW (60% ED) Torque | 150 Nm (100% ED) / 180 Nm (60% ED) Rapid Traverse X/Y | 15 m/min Rapid Traverse Z | 10 m/min Feed Rate Range | 1 – 999 mm/min Repeatability | ± 0.0075 mm Positioning Accuracy | ± 0.015 mm Measuring Systems | Direct linear measuring systems in all axes Axis Drives | Siemens AC servo motors Ball Screws | In all axes Coolant System | 100 l tank, 40 l/min at 2 bar Chip Conveyor | Hinged belt conveyor, discharge height approx. 1,200 mm Central Lubrication | Automatic Optional Axis | NC rotary table RTA 200, Ø 300 mm Equipment Siemens 810 M/GA3 CNC control 9" monitor with softkeys 48 tool offset pairs Drilling and milling cycles Subprogram technique Teach-in and playback function Programming possible during running machining Ijdpfxjxp Hmao Ahnjig Full enclosure with splash guard Automatic spindle orientation Operating hour counter Complete machine documentation available

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1565811, overall weight: 300 kg, total length: 1,200 mm, total width: 800 mm, total height: 650 mm, Used Stöber geared motor with Rexroth servo drive. Stöber gearbox. Type K813VNG0320MO40 Performance: Gearbox: n1-2500/min. n2-21/min. Motor power: n.max.4500 min-1 Type: MKD112C-058-KG3-BN Data see type plate / pictures. Isdpfjtp Tbzjx Ahnsig Quantity: 1 Euro pallet with 1 gearbox. Packaging and loading included.

Condition: used, Year of construction: 2006, gebraucht 2006 5539 prompt, Zwischenverkauf v Taiwan 55100 € 1 Iijdpfx Ahszzrcdjnog 49600 € 1000 mm 850 mm 1000 x 610 mm 1000 x 600 mm 1000 mm 5 - 25 m/min 1250 mm/min 3 - 32 (0,02) mm 690 mm max. 400 mm/min mm 400 mm/min 0.001 mm 1450 1/min 11 kW 3.7 kW 0.37 kW 20,6 kW 3700 mm 4000 mm 3250 mm 4800 x 2830 x 2800 mm 7400 kg 1500 kg 1120 kg 1500 kg 355 x 75 x 127 mm Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) 2 pcs. grinding wheels 2 pcs. grinding wheel flanges machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH New grinding spindle and spindle bearings Buying used machinery is a matter of trust - Our transparency promise We offer you maximum security and complete transparency. •HONEST INSIGHTS: Detailed photos and functional videos of the current condition •LIVE ON-SITE CHECK:Live testing is possible at our facility •DIGITAL DEMONSTRATION:Individual live demonstration via video call •RISK-FREE PURCHASE:14-day return policy Details:

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 -Type: A06B-6110-H015 -Number: 2x servo modules available Iiodpfx Asi Sdf Hehneg -Price: per piece -Dimensions: 285/90/H380 mm -Weight: 4.9 kg/pc.

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg Iijdpfxsyanlas Ahnsg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Isdpfsz Akmkjx Ahnjig Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 4,300 mm, total width: 2,300 mm, total height: 2,960 mm, overall weight: 10,600 kg, feed length X-axis: 600 mm, feed length Y-axis: 270 mm, spindle motor power: 22,000 W, product height (max.): 370 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 220×3200 | 220 T | MTP-3212 | 4 AXES X,Y,R+V The brand-new MTP 220×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system, heavy-duty welded construction, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) Ijdpfx Ahjzg Evhonjig • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications • Pressing force: 220 T • Maximum bending length: 3100 mm • Distance between columns: 2550 mm • Throat depth: 450 mm • Ram stroke: 270 mm • Maximum opening height: 370 mm • Table height: 920 mm • Controlled axes: X, Y, R + V • Main motor power: 22 kW • Hydraulic oil tank capacity: 200 L • Machine dimensions (L × W × H): 4300 × 2300 × 2960 mm • Machine weight: 10,600 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate operation.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, Overwrapping/Cellophane Wrapping Machine by Sollas Holland B.V., Model SOLLAS 20, Year of Manufacture: 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual products or bundles. Technical Specifications Machine type: Overwrapping/Cellophane Wrapping Machine Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam/Servo Output: up to 50 cycles/min Operating pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Max. film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Max.: 300 × 200 × 96 mm Film material: PP, coated paper, common heat-sealable materials Machine weight: approx. 950 kg Machine color: RAL 9010 (white) Features Servo-driven film feed Cam mechanism – robust and low-maintenance Single-sided infeed and outfeed (single level) PLC control with touchscreen Trailing-edge seal system Quick format changeover (approx. 10–20 min) Low-cost exchange parts Compatible parts with Sollas 17 / 19 / S(X) series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel covers Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoners, case packers, banding systems, etc.) Operational Advantages Highly reliable technology Compact design Flexible format ranges Quick changeover Ideal for small to medium production runs Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use Iiodpfx Aeyhc Dyjhnsg More photos and videos available! Shipping terms: ex location, loaded free of charge Loading: possible by forklift Transport/disassembly: can be organized Contact If interested, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and errors All prices net plus VAT

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side Isdpfjzy Itijx Ahnoig 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 101850, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse (X): 60 m/min - Z-axis travel: 200 mm / Rapid traverse (Z): 30 m/min - Y-axis travel: 40 mm / Rapid traverse (Y): 30 m/min - Standard enclosed automation (number of loading nests according to workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Carrier With Live Tools - Cylindrical shank holders per DIN 69880: 12 – VDI40 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Iijdpfx Ahexvyh Ronjg Electrical System - Operating voltage: 400–480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features & Capabilities: - Vertical design: Ensures optimal chip evacuation and easy part handling. - CNC control: GE Fanuc Series 18i TB. - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm with Heidenhain linear scales. - Main spindle: Delivers high power and a wide speed range. - Automated loading/unloading: Integrated automation system for parts feed and retrieval. - Live tooling: Supports live tools for extended machining operations including drilling and milling. - Chip conveyor. Machine Condition: NOT WORKING - Live tool drive motor - X-axis optical scale - Z-axis optical scale - Z-axis belt - Z–X-axis servo drive - X, Z-axis optical scale cables - Coolant pump

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T (MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and protective enclosure / Machine in excellent technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1984 bar Dosage volume: 226 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 510x510 mm Platen dimensions: 740x740 mm Ejector: hydraulic Clamping system: toggle lever Control system: B&R touchscreen Iedpfxszy Iiqo Ahnsig Additional equipment: Hybrid machine: high-speed, energy-efficient and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (available at extra cost) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor driven by inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Wemo 6-5 xDesign Robot Year of manufacture: 2017 4-axis robot: 3 axes driven by servo motors (electric) Safety package for robot Robot with adapter, Wemo WCS-R conveyor belt and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10x1.97x2.60 m Drive: Pump/Motor: 11.5 kW Heating power: 11.3 kW Total power: 22.8 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to take part in live technical tests at our company in Łódź. Price: 25,000.00 EUR

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection 1 x AOI database structure Web Apache server 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Iedeyw Nxwspfx Ahnsig Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Height measurement up to 25 mm PCB size: 50x50 – 510x460 mm Component clearance: top 40 mm, bottom 40 mm

Condition: new, Year of construction: 2025, HARDLINE MACHINING CENTER WORKING AREA 1300X1500MM. Z-AXIS WORKING RANGE 300MM OMRON SERVO AC HIGH SPEED DRIVES 1.5kW T-SLOT TABLE FOR M10 MOUNTINGS - MADE OF SOLID STEEL OSAI OPENSMART INDUSTRIAL REAL-TIME CONTROL SYSTEM, ETHERCAT COMMUNICATION EUCHNER HBA-103037 MANUAL MANIPULATOR CONTROL CABINET AIR CONDITIONING HSD MAX18KW S6 ES789L ELECTRIC SPINDLE KIT - H6161H1501– ATC, UP TO 24,000 RPM ENCODER FOR ATC HSD ELECTRIC SPINDLE ACTIVE COOLING SYSTEM - CW-6000 CHILLER Isdpfxsu U Hh Ts Ahnoig 12-POSITION LINEAR MAGAZINE TOOL LENGTH SENSOR RENISHAW TS27R TOOL MEASURING PROBE TOOL PRESENCE SENSOR PREMIUM COOLING MIST FREEZE NOZZLE SKF AUTOMATIC CENTRAL SOLID GREASE LUBRICATION REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) Option for threading and drilling in aluminum and steel

Condition: used, Year of construction: 2019, functionality: fully functional, TOFFLON VIALS FILLING LINE Consisting of 1) Tofflon Washing Machine, model FW03024 ì Washing machine for vials. Built in 2019. PRODUCTION Filling range: 2-100 ml (ca) Cleaning speed: 7ml-100VPM Operation mode: servo drive Iodpfeycxdljx Ahnjig CHARACTERISTICS Size: 2,335 mm × 2,405 mm x 1,450 mm (ca) Power (kW): 13-15 (ca) 2) Tofflon Tunnel, model FT0110 For cleaning and filling of vials. Built in 2019. 3) Tofflon Filling and Stoppering Machine, model FF0204 Machine for filling and closing of vials. With 4 filling Needles. 4) Tofflon Capping Machine, model FC0210 For capping of closed vials. Built in 2019. PRODUCTION Production range: 2-100ml Production speed: 10ml-100VPM Number of capping heads: 6 CHARACTERISTICS Power (KW): 7.5 (ca) Dimensions: 2,700 mm x 2,180 mm x 2,750 mm (ca) Weight: 1,500 kg (ca) 2 complete formats included: 10R/24mm and 20R/30mm.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting Iiodpfxezwl Dmo Ahnjg 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: used, SANYO SANMOTION Servodrive for Y-axis- with firmware for the Y-axis - removed from Wittmann W721 Iisdpfxjt Sbfie Ahnsg - refurbished3 months warranty: This is provided exclusively by a manufacturer's inspection. The process is carried out by Complast ufacturer: SANYO type: QS1A03AA Dition: überholt

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions, enabling the implementation of the most demanding bending tasks. Ijdpfxjuw Ri Aj Ahnoig Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Rear stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg *An offline workstation license (for creating bending sequences on a PC) is available as optional equipment! The price includes: Electric deflection arrow – €2,380 Supports on linear guides – €480 Hydraulic oil – €440

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Dkeb A D Nwouw Ri Asw Aon Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Back stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Iiedpfx Asuw Scdehnog Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1700 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg *An offline workstation license (for creating bending sequences on a PC) is available as optional equipment! The price includes: Electric deflection arrow – €2,380 Supports on linear guides – €480 Hydraulic oil – €440