Used Onbekend Containerslede 7,5 Meter for sale (4,190)

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 447 kg Iedpfex Rb D Sex Acaetk Compressed air connection: G 3/4 "

Condition: used, Year of construction: 2019, - Brand: Omme Lift - Type: 1650 EB - Year of construction: 2019 - Hours: 682 - Weight: 1975 kg. - Working height: 16.5 meters - Lateral reach: 10.5 meters - Dutch license plate - 25-WT-SB - Drive: Battery + 220 volts Iodpfxsxrv E Re Acaetk - Movers / wheel drive - Safety inspection until Aerial work platform book available - CE document available - Machine is very neat - From 1st owner - Video on our website - Trade-in and transport possible * Brand: Omme Lift *Type: 1650 EB * Construction year: 2019 * Hours: 682 * Weight: 1975 kg. * Working height: 16.5 meters * Lateral reach: 10.5 meters * Drive: Battery + 220 volts

Year of construction: 2025, condition: new, Magnetic table, 60 kg/square meter, 18x18 milling pattern for milling machines. Magnetic clamping plate 200x300x80mm, 60 kg/square meter, 18x18 milling pattern – 470 EUR Magnetic clamping plate 200x400x80mm, 60 kg/square meter, 18x18 milling pattern – 660 EUR Magnetic clamping plate 300x400x80mm, 60 kg/square meter, 18x18 milling pattern – 800 EUR Magnetic clamping plate 300x600x80mm, 60 kg/square meter, 18x18 milling pattern – 1100 EUR Magnetic clamping plate 400x800x80mm, 60 kg/square meter, 18x18 milling pattern – 1880 EUR Magnetic clamping plate 400x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2300 EUR Magnetic clamping plate 500x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2800 EUR Round magnetic clamping plates of this type with a diameter of 200-800 mm. Itedpszd Rlvjfx Acaek

Condition: good (used), Year of construction: 2008, operating hours: 2,541 h, lifting height: 8,800 mm, fuel type: electric, mast type: triplex, battery manufacturer: Batterie Siems, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,200 mm, Empty weight: 3.590 kg Battery: 620 Ah, 48 V, Year of manufacture 2017, Brand of battery Batterie Siems Lifting capacity: 1.700 kg Maximum passing height: 340 cm Number of valves: 3 Technical condition: good Isdpfxjwtmqpj Acastk Visual appearance: good Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: used, first registration: 05/2001, | Interchangeable platform | Side walls 60 cm | 7.45 meters | Subject to errors, typos, and prior sale. Itsdpozrxawsfx Acaok

Condition: used, Year of construction: 2010, operating hours: 4,900 h, Equipment: all wheel drive, Used vehicle Iedpfx Asx E Iwnocastk Vehicle number: 3247, Genie Z-51/30J aerial work platform, year of manufacture: 2010, operating hours: 4,900, DEUTZ 3-cylinder diesel engine with 36.3 kW, max. working height: 17.62 m, max. platform height: 15.62 m, max. horizontal outreach: 9.25 m, wheelbase: 2,030 mm, turntable rotation: 359°, platform dimensions (L x W): 1.8 m x 0.76 m, automatic horizontal leveling, platform rotation: 160°, all-wheel drive, tire size 355/55 D625, foam-filled, 64.3-liter fuel tank. Inquiries welcome, subject to errors and prior sale.

Condition: used, axle configuration: 2 axles, first registration: 06/2004, total length: 9,100 mm, total width: 2,500 mm, suspension: air, tire size: 425/65 R 22.5, wheelbase: 6,750 mm, Year of construction: 2004, Equipment: ABS, = Additional Options and Accessories = - ADR - Air suspension = Additional Information = Axle configuration Tire size: 425/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 2: Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Weights Unladen weight: 6,600 kg Payload: 28,400 kg GVW: 35,000 kg Functional Iodpfxezvcycs Acaotk Number of chambers: 4 Pump: Yes Hoses: Yes Flow meter: Yes Condition Damage: None Identification License plate: OH-71-SZ

Condition: used, Year of construction: 1996, - Brand : Omme - Type: 2500 EBDZ - Year built: 1996 - Weight: 2880 kg. - Hours: 587 hours - Drive: Kubota diesel + Battery + 220 volt - Working height: 25 meters - Lateral reach: 12.7 meters - Wheel Drive / Movers - Extra nose wheel - Stamp plates 4x - Drive plates 4 x - Dutch license plate - second owner - Safety inspection possible - Aerial work platform book available - Maintenance history dealer present - CE document available Itjdpfjyy Dmbex Acaok - Trade-in and transport possible - Video on our website * Brand: around *Type: 2500 EBDZ * Construction year: 1996 * Weight: 2880 kg. * Lateral reach: 12.7 meters * Working height: 25 meters * Hours: 587 uur

Condition: used, Year of construction: 2016, - Brand: Niftylift - Type : 170 HDET - Year of construction: 2016 - Hours: No hour counter - Weight : 2164 kg. - Working height: 17 meters - Lateral reach: 8.7 meters - Bi energy - Battery 24 Volt - Diesel / Kubota Ijdpfxszmu Iyo Acaotk - Wheel Drive / Movers - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Niftylift * Hours: No hours counter * Working height: 17 meters * Lateral reach: 8.7 meters Aerial work platform book: Yes CE document: Yes *Type: 170 HDET * Construction year: 2016 Maintenance history: Yes * Weight: 2164 kg. Video on website: Yes

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW Iodpjx I Izrofx Acaotk - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ijdpfsztq Hxex Acastk Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: new, Year of construction: 2019, Emerson Micro Motion F100S Coriolis Mass Flow Meter | 4200 Transmitter | New in Box | 2019 We offer this Emerson Micro Motion Coriolis Mass Flow Meter in excellent, unused condition. The unit comes complete with the original Emerson 4200 transmitter, calibration certificate, documentation, software CD, and original packaging. Itsdpfx Acszpaagjask Condition: Unused surplus stock. Sold exactly as shown in the pictures. Delivery: Ex Works Rotterdam, The Netherlands. Payment: 100% in advance. Sold as is, where is, without warranty or guarantee.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 Isdpfjzung Ejx Acastk >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: used, functionality: fully functional, machine/vehicle number: FN 62xxxx, Year of construction: 2020, operating hours: 4,510 h, load capacity: 1,500 kg, lifting height: 3,000 mm, free lift: 1,405 mm, fuel type: electric, mast type: duplex, construction height: 1,970 mm, fork length: 1,100 mm, empty load weight: 2,918 kg, total length: 1,785 mm, drive type: Elektro, construction width: 990 mm, Electric 3-wheel forklift Chassis number: FN 62xxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Non-marking Front tire size: SE 18x7-8, non-marking Rear tire type: Non-marking Iedpfx Acozq Ia Deajtk Rear tire size: SE 18x7-8, non-marking Battery voltage: 24V Battery Ah: 920Ah Battery manufacturer: Hoppecke Battery type: PzS Battery year of manufacture: 2020 Description: Serviced, technically and visually refurbished, inspected according to UVV regulations, no warranty/liability for defects Side shifter, attached with couplings 3rd valve, work light rear, work light front, impulse control, full free lift, rear spotlight, tail lights and turn signals, flashing beacon, Solo-Pilot (single lever), 2 panoramic mirrors, non-marking tires, under 2 meters in height (special construction), battery (04/2020) with Aquamatik, external charger included.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Ijdpoy Tp Sijfx Acaotk Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Condition: used, Year of construction: 2013, - Brand : Omme - Type: 2500 ED - Year of construction: 2013 - Weight: 3300 kg. - Hours diesel engine: 4787 hours - Drive: Kubota diesel - Working height: 25 meters - Lateral reach: 13 meters - Wheel Drive / Movers Itedpsy T R R Hefx Acask - Dutch license plate registration - Safety inspection valid until 12-11-2026 - Aerial work platform book available - Maintenance history available - CE document available * Brand: around * Working height: 25 meters *Type: 2500 EBDZ * Drive: Kubota diesel * Lateral reach: 13 meters * Construction year: 2005 * Weight: 3500 kg. * Hours diesel engine: 3526 uur * Hours electrical motor: 1290 uur

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system -Machine lamp -Various tool holders Iodpfxozu Nhwo Acaetk -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted.

Condition: good (used), mileage: 2,35,000 km, power: 92 kW (125.09 HP), first registration: 01/2012, fuel type: diesel, wheelbase: 3,680 mm, fuel: diesel, color: white, emission class: euro4, number of seats: 3, total width: 2,070 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2012, operating hours: 3,213 h, General Information Model year: 2012 Technical Data Number of cylinders: 4 Engine displacement: 2,299 cc Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Weights Unladen weight: 3,065 kg Iedpsy Uynwsfx Acaotk Payload: 435 kg Gross vehicle weight: 3,500 kg Functional Mast: Telescopic Condition Technical condition: good Visual condition: good

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: S120598-5-10, STOPA Storage System – 66.15 m Length – 850 Pallet Positions – Year 2014 – Excellent Condition We are offering for sale a high-performance industrial pallet storage system by STOPA, serial number S120598-5-10. System specifications: - Total system length: 66.15 meters - Total pallet positions: 851 - Actual usable pallet positions: approx. 500 - Platform dimensions: 3000 x 1500 mm per level - Number of towers: 33 - Pallet slots per tower: 29 - Loading/unloading stations: 11 - Minimum required installation ceiling height: 9.4 m - Year of manufacture: 2014 - Condition: Very good – clean, maintained The system is currently disassembled and stored indoors at a warehouse in Piaseczno, Mazowieckie, Poland. Iodpfxew Eb N Dj Acastk Live demonstration is not possible, but the system was fully functional at the time of disassembly. Complete technical documentation is available. Loading and transport assistance can be provided. Reason for sale: change in warehouse layout concept. This is a premium solution for companies seeking to expand or modernize their pallet storage capacity with a reliable, high-capacity system. For further details, photographs, or to arrange an inspection, please contact us.

Condition: used, Year of construction: 2010, - Brand: Genie - - Year of construction: 2006 Isdpfx Aeyy Dgbecastk - - Hours: 543 hours - Drive: Battery - Working height: 10 meters: - Lifting capacity: 227 kg. - Safety inspection 18 Video on our website - Trade-in and transport possible * Brand: Genius *Type: GS2632 * Construction year: 2006 * Hours: 543 uur * Working height: 10 meters * Drive: Battery * Lifting capacity: 227 kg.

Condition: used, Year of construction: 2010, - Brand: Genie - Type : GS3246 - Year of construction: 2010 - Weight: 2791 kg. - Hours: 620 hours - Drive: Battery - Working height: 12 meters: Isdpfsyyyxtex Acaotk - Lifting capacity: 317 kg. - Safety inspection until 10-2026 - Video on our website - Trade-in and transport possible * Brand: Genius *Type: GS3246 * Construction year: 2010 * Weight: 2791 kg. * Hours: 620 uur * Working height: 12 meters * Drive: Battery * Lifting capacity: 317 kg.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, Small wood chipper, manufactured in Denmark, is new. Iedpfx Aeza U Emscaotk

Condition: used, Year of construction: 2019, - Brand: Socage / Iveco - Type : 23T - Year of construction: 2019 - Hours: 1511 hours - Odometer: 11198 km. - Weight: 3315 kg. - Drive: Diesel + 220 volts - Working height: 23 meters - Lateral reach: 13.5 meters - Lifting capacity: 300 kg. - Automatic stamping Iodpfxjztzuye Acaotk - Narrow + Wide stamping - Dutch license plate possible - Export license plate possible - Safety inspection valid until Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Socage / Iveco * Lifting capacity: 300 kg. * Drive: Diesel + 220 volts *Type: 21DJ * Construction year: 2020 * Hours: 86 uur * Km. position: 3244 km. * Weight: 3300 kg. * Working height: 21 meters * Lateral reach: 10 meters

Condition: good (used), Year of construction: 2010, functionality: fully functional, We are selling several dosing systems for liquid silicone of the brand Reinhardt - technik, model LSR 200 Modular, years 2004 to 2010. All units are operational and in good condition. Isdpfxox A Sxzs Acastk

Condition: used, mileage: 1,13,000 km, power: 134 kW (182.19 HP), first registration: 04/2012, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Well-maintained IVECO with ML 120EL18 aerial work platform Equipment: Comet aerial work platform 15 meters working height 9 meters lateral working possibility. Box body for tools and for the crew's stay with auxiliary heating Numerous warning lights rotating beacons Traffic cone Additional heating and lighting in the box body Ladder holder on the right side of the box body Plastic work basket for insulated electrical work Support only extends downwards Maximum support width 2,400 mm Tire condition at least approx. 60% Itedpjvm R Sfefx Acask For questions regarding the equipment, please call us. Errors and omissions excepted!