Used Palamatic M7 Palpharmamove for sale (317)

Condition: used, Year of construction: 2013, Approx. 1 million prints Format: 530 x 740 mm 15 k speed version- 15,000 sheets/hour max. Press Center Easy Control Dcsdpfx Alszc Hlwe Aok Autoplate Alcolor All washing units Low-pile delivery Compressor Antistatic device Powder sprayer Non-Stop System Short-term available

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00608, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/70 manufactured in 2011.04. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2011.04 Warranty term (months): 12   Dcedpfx Aljzdqwfs Ajk Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2011.04 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,289 h, load capacity: 7,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 2,750 mm, fork carriage width: 1,600 mm, fork length: 1,600 mm, empty load weight: 10,700 kg, total length: 3,450 mm, drive type: Treibgas, construction width: 1,550 mm, Compact forklift - LPG Load center of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 355-65-15 Rear tires type: Superelastic Dodpfxju Dztxe Al Ajck Rear tires size: 2.50-15 Description: In addition to this Mora model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this M70C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin,

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12 [mm] - Max. machining length : 135 [mm] - Spindle speeds : 15.000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 0.4/0.75 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1760 X 820 [mm] - Machine height : 1610 [mm] - Machine weight : 1700 [kg] EQUIPMENT Dcedpfszk Rtgox Al Ajk - CNC : Mitsubishi - 3 colors status lamp - Rotating guide bush - Ejection of workpiece - Parts catcher - Parts conveying strip - Coolant tank : Müller Combiloop CL2 * with high-pressure pump - Bar loader : IEMCA ELITE 112 E/R / 32 LL - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12 [mm] - Max. machining length : 135 [mm] - Spindle speeds : 15.000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 0.4/0.75 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1760 X 820 [mm] - Machine height : 1610 [mm] - Machine weight : 1700 [kg] MACHINE HOURS - Number of working hours : 32778 [h] EQUIPMENT - CNC : Mitsubishi - 3 colors status lamp - Rotating guide bush Dedpfezk Rr Nox Al Aock - Ejection of workpiece - Parts catcher - Parts conveying strip - Coolant tank : Müller Combiloop CL2 * with high-pressure pump - Bar loader : IEMCA ELITE 112 E/R / 32 LL - Electric transformer

Condition: excellent (used), Year of construction: 2011, Immaculate Fanuc packaging robot with controller which has come from a factory which closed a few years ago. The nicest robot we have had for a long time, very well looked after. Dcsdpfx Alehn Szqs Aok

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Dsdsx N Nlzspfx Al Aock

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Dodpfxjy Duzqs Al Aeck Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: excellent (used), Year of construction: 2008, operating hours: 123 h, Varnishing tower (chambered coater system) Axis control CP2000 control center with remote control for color zones, color ducts, as well as circumferential, side, and diagonal registration with job memory card and touch screen Alcolor film dampening system with circulation and cooling Ink temperature control Dedpfx Alozlqduj Asck Autoplate automatic plate changing system Automatic ink roller cleaning system Automatic blanket and impression cylinder cleaning system Powder sprayer IR dryer Extended extended delivery Standard accessories

Condition: used, mileage: 9,00,400 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 8,096 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, front tire size: 385/65R22,5, rear tire size: 315/70R22,5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, MAN TGX 18.460 XLX | Automatic, EURO 6 | Intarder, refrigerator | Lane keeping assistant, adaptive cruise control, emergency brake assist | Heated seats, auxiliary heating, cruise control | Air conditioning, electric windows, heated electric mirrors | Radio/CD, differential lock | Stainless steel tool box | Tyres 385/65R22.5 and 315/70R22.5 | Austrian vehicle | Subject to input error, mistakes and prior sale. Dcjdpeydi A Uefx Al Aok

Condition: ready for operation (used), Hauser KM 7.0 / / 0 motor spindle, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Djdjlrzlfopfx Al Aock

Condition: ready for operation (used), Siemens 1FT6084-8AH71-3EG1 synchronous servomotor, serial number: YFM712281102003, used, good condition, 100% fully functional, scope of delivery as per photos. Dcsdpfx Aljy Srkre Ajk

Condition: ready for operation (used), Seidel SM 71-K servo motor SN:92213912 without encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Djdpfxsuz Iwlj Al Aock

Condition: new, INA K811/600-M axial roller cage SN:M71, outer dimension 70.5 cm, inner dimension 60.5 cm, unused in opened original packaging, 100% functional, delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Djdpfxox Dw Eco Al Aock

Condition: ready for operation (used), Jahns ARH-0-GM76C002-PPH-R2-400-LG600 motor with Stöber C002F0175D63K4 gearbox, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. NOTE: Please request separate quotes for packaging and shipping costs! Dcsdpfoi D Ixcox Al Aek

Condition: excellent (used), Year of construction: 2014, total width: 12,000 mm, total length: 10,000 mm, total height: 6,000 mm, overall weight: 92,000 kg, Length:10000mm Dcodpfx Aezcva Djl Aek Width:12000mm Height:6000mm Weight:92000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2001, PM 74-2 2001 Year Dsdezb Nxkspfx Al Aock Straight 22 mil impressions Easy plate Alcolor Dampening with Technotrans Grafix Alfatronic 200 powder Gear free of damages Tools and Books Brand new rollers

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00464, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2010.05 Djdpfx Aszb Up Iol Asck Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.04 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cubic dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. Dedpfx Aezhvxpsl Aock 2 tables with aluminum table top 2,000 x 2,250 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 separating partition (removable) between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, type of input current: three-phase, - max width of foil is 700 mm - max length up to 400 mm, possible to 1000mm - speed up to 120t/min - up to a thickness of 60 microns - conversion to a servo motor - added frequencies for tracks and drives - antistatic Dedpfxezga Aps Al Ajck - additionally knife for double welding The machine is old but regularly updated and well-maintained. Renewed in 1999. I am available for more information.

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg Dsdeu Ndbpjpfx Al Asck dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Year of construction: 2026, fuel type: diesel, motor manufacturer: NEF67TM7, Field of application: Construction Empty weight: 2.409 kg Generator capacity: 220 kVA Dimensions of cargo space: 330 x 120 x 197 cm Frequency: 50 Voltage: 230 Water tank volume: 600 l Please contact Sales Department for more information Over 80 years experience in maintenance. Dcsdey Dn D Sspfx Al Ask Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2026, fuel type: diesel, motor manufacturer: NEF67TM7, Field of application: Construction Empty weight: 2.409 kg Generator capacity: 220 kVA Dimensions of cargo space: 330 x 120 x 197 cm Frequency: 50 Voltage: 230 Water tank volume: 600 l Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Dsdpfx Aoy Dn Dxol Ajck Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, in a portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base surface. 2 tables with aluminum table top 1,500 x 2,250 mm with grid drillings. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically powered roller shutters, 1 partition (removable) between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Dcedpjzhbgfefx Al Ask Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Movable control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. Dcodpszhbbpofx Al Ajk A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. 2 tables with aluminum table top 3,000 x 1,500 mm with grid hole pattern. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.