Used Powder Coating Oven On Gas 1500X5000X200 for sale (14,488)

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger Gedpfx Apevy Txzs Dskc - Klinghammer SIA 180 beader - Angelus 50p seamer

Year of construction: 2022, condition: new, Model KPO-3 Booth Type Open Gkodpfsbuyr Tex Ap Dec Worksize dimensions 2800 width x 2200 height x 1000 depth Overall dimensions 2800 width x 2300 height x 1700 depth Weight 550kg Power supply Electric Nominal power 0,69kW x2 Voltage 380V Frequency 50-60Hz Filters Polyester Filters count 3 Filters hang type Bagnet type, easy on/off Filter area 22,5m2 Filter cleaning system Pneumatic - Jet Venturi Ventilator type Aluminium ray rotor 2pcs. Loudness 74dBa Air consumption 10,200m3/h Warranty 12 months

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Gkjdsxa H Ewjpfx Ap Djc Do you have any questions or suggestions? We are happy to assist you.

Condition: used, - Used CRISTAL FM 2 Rotary Gas Oven 600x800 - Dimensions (WxDxH): 1950x2760x2480 mm - 2 oven racks: 600x800 mm - Serial No.: 0008319 - Year: 23-02-2002 - Baguette capacity (250g): 144 - Bread capacity (400g): 90 - Door opening (WxH): 800x1850 mm - Rack height: 1820 mm - Voltage: 380V - Electrical power: 4 kW - Heating power: 77 kW - Net weight: 1100 kg - Burner at the top - Sold with gas burner - Overhauled equipment: The equipment is serviced upon order; lead times for availability and return are agreed at that time (please request pricing after overhaul). Cristal Range: - Ovens in the Cristal range are rotary rack ovens designed for bakery and pastry applications. - The even circulation of hot air combined with the rotary motion of the rack ensures excellent baking quality and consistency for all production types: fresh, raw, frozen, and par-baked frozen. - Rapid heat-up makes this oven a flexible solution to optimize production according to sales cycles. Range Features: - The FM2 model accommodates 600x800 mm baking trays. - The heat exchanger in FM1 and FM2 ovens can be positioned at the rear, right, or left of the baking chamber. Performance, Responsiveness, and Versatility: - For gas and oil-fired versions, the heat exchanger is made of refractory stainless steel. Dksdsyhfixecu Ti Eneh - The design and materials of the exchanger ensure perfectly even baking across all levels of the rack. Gksdjyhfixjpfx Ap Djc - Its specific section allows optimal heat exchange for outstanding performance and efficiency. - Air circulation inside the baking chamber is provided by three vertically aligned stainless-steel turbines, each 300 mm in diameter, located at the rear of the oven. - Air drawn in by the turbines is heated on contact with the exchanger and distributed evenly through the distribution slots in the baking chamber. - Operation of this oven is particularly straightforward, with no complex adjustments required (settings are factory pre-set).

Condition: used, -External dimensions (LxWxH): 1550x1600x2560 mm -Trolley: 600x800 mm Godpfxjwxmy Ue Ap Dokc -Baking surface: 9.6 m² -Minimum ceiling height: 2850 mm -Fixed Program Control -Heating mode: Gas Lrsyewxmy Us Tdxuger -Nominal thermal output: 75 kW -Voltage: 400 V -GAS burner -It is well known: the MIWE roll-in is probably the most economical rack oven in the world (and this has been proven in hundreds of bakeries). -Its excellent baking properties make it truly unique in its category—and for good reason. -For consistently even baking, 'atmospheric baking' completely eliminates disruptive influences caused by ambient conditions and draft. -The patented MIWE aircontrol system ensures precise heat transfer and perfect crispness. MIWE delta-baking, with extremely precise temperature control, allows for true custom settings, e.g. for pastries and fine bakery goods. -In addition, with the heat recovery wall combined with a high-performance steam device, quick successive baking at reduced connected load becomes possible. And these are just a few of the many good reasons to take a closer look at the MIWE roll-in.

Condition: used, Dimensions: 2430x2400x2730 mm Trolley dimensions: 800x1000 mm Capacity: minimum 180 baguettes Usable baking surface: 32 m² Burner location: Top Model: R1016-6 / 4130901 Iedcowxl R Esu T Rxijii Power: 5.0 kW Gksdpfx Apjwxl R Eo Dsc Voltage: 400 V Year: 1996 Gas burner

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control - Voltage: 400V - Power: 4 kW Gksdpfx Asxxanpop Djc - Burner: Gas - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating Gksdpfx Aegal A Iep Djc -Infrared dryer: used for powder coating slats/blinds production -Manufacturer: Himmel, type HA 5-2-9/500 -Geared motor: WEG 0.37 kW -Dimensions: 880/1050/H2200 mm -Weight: 308 kg

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Working pressure: 3 bar Pump: yes Flowmeter: yes Gjdpfx Asittfnjp Dskc We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: new, Year of construction: 2026, It is a complete painting system, comprising the following components: 1) An oven with an air heater (the type of fuel can be adapted to the client's specifications). 2) A spray painting booth equipped with an absorbent filtration system suitable for even the most demanding paint applications. 3) Two parking areas where parts can be placed after painting or curing. 4) A rail system that enables easy movement of parts from one station to another. 5) A trolley for transporting the aforementioned parts. Gksdpfx Ajyaqt Tsp Doc 6) A fully integrated and robust steel structure, engineered for high static stability and to minimize the risk of component failure. From both a design and technical specification perspective, the above installation constitutes a comprehensive and autonomous electrostatic painting line. For limited systems, there is an offer for the complete package at 115,000 euros.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Godpfx Ajfz Dt Njp Dokc - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Gkjdpfx Asfz Dubep Doc Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Gedofz I Edjpfx Ap Dekc Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops Gkodpfxezhk Rme Ap Doc - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: used, continuous grilling line all stainless steel bottom contact grilling + top hot air suitable for steam injection useful width conveyor 900 mm belt width 1.000 mm net length 4.750 mm electrically heated 276 kW underplate max. 260°C Gsdpoz Ixw Esfx Ap Dekc air temperature max. 280°C belt washing system/hot water ± 60°C (operational supply) adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm new Teflon belt

Year of construction: 2025, condition: new, functionality: fully functional, Available models on GAS and Electrical power supply with different dimensions and capacities Perfect for artisanal bakeries, semi-industrial plants and retail stores Gkedowhdhuopfx Ap Dec The ideal solution for anyone looking for superior baking performance and maximum flexibility when working with different types of bread and pastries, regardless of shape, size or quantity. It burns perfectly at both full and partial loads. Innovative baking systems for perfect results BTT (Bottom to Top) baking system – air circulates from the bottom up, creating a floor oven effect for a unique baking quality. The result: a product that leaves customers breathless! DAF (Double Air Flow) – extremely even baking thanks to the double airflow that encompasses each product. Not available on model 4676. Ideal for: Cakes and pastries of low weight (e.g. 60–70 g Kaiser pastries, biscuits, sticks, tarals...) Fast baking cycles (less than 15 minutes) High racking (more than 18 levels) Narrow and long trays (e.g. 46×80 cm) OPT function – allows you to monitor the efficiency of the furnace operation in real time, helping in more rational use and energy savings Technical characteristics: Baking surface: 6.3 m2 (n°18T 46x76) Oven dimensions WxDxH: 123x171x251 Minimum room height: 270 cm Power GAS: 52 kw 44000 kcal/h Electrical power: 1.5 kW Weight: 1350 kg Max. Baking temperature: 300 °C Heating: electric or gas/light fuel oil Main switch located on the control panel Advanced control and management TOUCH electronic control "Ready to Bake" – the stove is always ready with lower consumption "Recovery Time" – the exact time to re-readiness Partial Load Management Password protection of recipes USB 2.0 for fast and secure data transfer. Effective steam management Speed Dry – faster steam ejection (70% faster), for crispier and more fragrant products Increased steam generator (standard equipment) – higher volume and better steam distribution Automatic steam damper Stainless steel exhaust – 900 rpm Energy efficiency and durability High-performance heat exchanger and firebox (in combustible versions) Double armored heaters (electric version) Two-layer high-density mineral wool insulation Rubber-silicone seal + stainless steel – long life and no steam leakage Thermo-reflective glass – saves energy Ergonomic vertical handle along the entire height of the door, with double locking system Raised stove bottom – additional thermal insulation Connection to a power limiter (only on electric models) Construction and ergonomics: Stainless steel front and hood Stainless steel floor with adjustable flaps for air regulation Rotary trolley unit with motor and mechanical overload protection Manual lifting mechanism Trolley access door 194.5 cm high (model 4676 off) Door with hinges on the right side Stainless steel access ramp, gentle inclination for easy insertion/removal of the trolley Flat inner surface – easy to clean Prepainted steel side panels Access to the main controls from the front Heavy Duty version (HD kit) – available for models 80100 and 80120 For intensive work over 8 hours a day and average temperatures above 250 °C – additional reinforcements for maximum durability.

Year of construction: 2019, condition: new, Preparation of a written offer / cost estimate for a powder coating system from the company Romer. Gkodpfx Apjc Sd D So Dec

Condition: used, -Model: Compact -Dimensions: 1980x1780x2550mm Gkedpfx Aowtg Nlep Djc -Trolley: 80x80cm -Capacity: 144 to 180 Baguettes -PN: 6775910 -Gas Burner -Trolleys not included -Voltage: 230 - 400V -Power: 6 kW -Frequency: 50 Hz -Sold with Gas Burner

Condition: used, -Model: NG 144 -Capacity: 90 to 252 baguettes -Trolley dimensions: 600x800 mm -Dimensions (LxWxH): 1500x1560x2200 mm -Year: 2000 -Serial No.: 144NGA035 -High-grade top hanging hook -Power: 2 kW -Heating capacity: 90 kW -Voltage: 400 V -Weight: 1,320 kg -Suitable for baking bread, pastry, and viennoiserie -Burner: C10 gas -Insulated with rock wool panels Gkodpfxowxl H Ho Ap Doc -Double glazed 8 mm, tempered 'Securit' glass -400 mm stainless steel access ramp Lrey Tdewxl H Hoxugsr -Equipped with steam evacuation valves -Fully stainless steel refractory heat exchanger -2 steam units for optimal distribution over the products -4 heat distribution turbines for improved baking -Front, hood, and extractor made of stainless steel -Stainless steel sheathed heating elements -High-temperature resistant silicone electric wiring harnesses.

Year of construction: 2020, condition: new, Transport systems Gjdpfxjfz I D Do Ap Dokc Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2026, condition: new, functionality: fully functional, Wood/gas-fired pizza oven with rotating stone, Ø150 cm: MARANA FORNI RotoForno SUeGIU series – RAL 130 brushed Mixed wood/gas fuel MARANA Forni gas system Capacity: 18 pizzas Ø290 or 13 pizzas Ø330 mm Cooking surface Ø1500 mm Rotating and liftable SUeGIU stone Micro-perforated stone surface High-density refractory stone Stone density: 3200 kg/m³ Thermal recovery: 40 to 100 °C Dome cladding RAL 130 brushed included RAL color to be specified Smooth black granite finish included Mouth width: 600 mm Stone height: 1200 mm Smoke outlet: Ø200 mm Right (DX) or left (SX) opening Gkodpfx Apszt Rhcs Dsc Thermostat with 5 flame levels Removable C-shaped door included C-shaped door used during heating Backup Patch console included Rotation maintained via Patch console Front support cover panels included Dimensions vary by approximately ±2% Dimensions: 2200 x 2200 x 2050 mm Weight: 2170 kg

Condition: used, -Deck: 2.20 m -Width: 1.50 m -Number of doors: 6 -Brand: Bongard -Energy: Gas / Fuel oil Gkjdpfx Asy Icg Njp Djc -Overhauled equipment: The equipment is prepared upon order; collection and return deadlines are agreed at that time (please request the price after overhaul)

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 racks: 800x600 mm - Serial number: 3002245 - Model: LR1-812H - Year: 01/2017 - Baguette capacity: minimum 360 - Baking surface: 19.2 m² - TOUCHMATIC touchscreen control panel - Voltage: 400V - Power: 5 kW Ndsy Tdjw Enwzjxugsa - Burner: Gas - Maximum baking surface with minimal footprint, compact and robust construction - Significant increase in productivity Gkjdpjw Enwzjfx Ap Dsc - The right choice for a wide range of requirements - The impressive dimensions of HEINLUXROTOR rotary ovens (baking surface relative to floor space) are made possible by the integration of the burner in the upper section and an optimized airflow design.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: Gjdpfxjwzl Hxo Ap Dokc The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Wiesheu EBO 60x80 Combi Oven Year 2017 - Euromat 64 L 2600-A-FBBBCBAA Gkjdsp Sr N Rjpfx Ap Dec - Ebo 68 M X1625-A-BBADA