Used Power Climber Bmu - Wc for sale (36,774)

Condition: used, OKUMA POWER SUPPLY GLP 5000T E0451-521-037 . 2663 Rcodpfx Aey S Dr Uegueb

Condition: used, length ~ 450 mm Rjdpfx Agsx R Ttlouocb width ~ 650 mm height ~ 1.100 mm Battery-powered hand strapping tool BW-03 with 2 x battery, charger and Cyklop dispenser and 2.5 rolls of strapping.

Condition: used, Pressure: 100 bar Rsdpfx Aowdun Djguocb Capacity: 2 L Motor: 0.75 kW

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 4,500 h, input voltage: 400 V, travel distance X-axis: 700 mm, number of slots in tool magazine: 21, controller manufacturer: fanuc, controller model: 31i model B5, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: BT 30 big plus, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FULL OPTIONAL TAPPING CENTER high torque/power version, complete with: spindle cone with BIG PLUS attachment FANUC DDR-T: continuous fourth axis (direct drive motor) with braked counter support and plate Rcjdpsuby Sxefx Agueb rotary joint for hydraulic feed to center table (for automatic workpiece clamping/unclamping) hydraulic power unit for workpiece clamping high-pressure refrigeration through the spindle chip conveyor evacuation automatic side poet robot interface tool setter RENISHAW TS-27 perfect machine with only 4,500 spindle hours!

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 Rsdpfxey Suyvo Aguecb . 03487

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Rsdjx A Imzjpfx Agujcb Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Rsdpfx Agofz Ndysuocb Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. Rcsdpfxsflrc So Agueb the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Rcedpfx Aefz A H Dsgueb - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: excellent (used), Year of construction: 2008, operating hours: 8,948 h, functionality: fully functional, spindle speed (max.): 9,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 660 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,500 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 11,500 W, input voltage: 400 V, year of last overhaul: 2026, CNC Tool grinding machine WALTER Helitronic Power TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC Series 31i-model A5 Software installed: Tool Studio 3 Number of axes: 5 Height of centers: 145 / 190 [mm] Stroke X axis: 470 [mm] Rapid traverse rate X axis: 15000 [mm/min] Stroke Y axis: 330 [mm] Rapid traverse rate Y axis: 15000 [mm/min] Stroke Z axis: 660 [mm] Rapid traverse rate Z axis: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Max. grinding wheel speed: 9500 [rpm] Grinding spindle motor power: 11.5 [kW] Max. diameter grinding wheel: 200 [mm] Number of hours under power: 8948 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 120 [l/min] Lubrication tank capacity: 400 [l] Supply voltage: 400 [V] Total power required: 25 [kVA] Weight: 4500 [Kg] INCLUDED EQUIPMENT: x1 TOOLSTUDIO 3 software x1 direct-drive A axis (Hollow Shaft) x1 automatic tool clamping system x1 RENISHAW LP2 part probe x1 DSL Air Technology type AES-GAMMA 30 mist extractor x1 lubrication tank + paper filtration system x1 GRUNDFOS coolant pump x35 grinding wheel holders (equipped with CBN wheels) x22 ISO50 attachments x1 SCHUNK collet holder x22 collets x1 NIKKEN collet holder x13 NIKKEN collets x1 metal rack for grinding wheel holders and ISO50 attachments 1x ISO50 calibration mandrel intended for axis calibration 1x calibration disc intended for axis calibration x1 set of service wrenches Various technical manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Rodpfx Agoy Sxrpsuocb Machine similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: good (used), TABLE PRESS WITH POWER UNIT Redsk Adfnepfx Aguscb

Condition: used, Indramat power supplies and drives Rcedpfx Aoxrf Tweguob

Condition: new, functionality: fully functional, Year of construction: 2022, Laser Welder – IPG Photonics Model: YLR-1500-WC Serial Number: PLMP32200563 Power Supply: 200–240 VAC, 1-phase, 50/60 Hz Power Rating: 4500 VA Manufacturing Date: March 2022 2. Control Power Supply / Main Unit – IPG Photonics Model: SYSLC0000058U Serial Number: PD206000 Power Supply: 380–415 VAC Phases: 3P + N + PE Frequency: 50/60 Hz Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Circuit Diagram: DOCCHSDMPSXX0225 Manufacturing Date: September 2022 Rcjdpfxowyb S Ij Agujb 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Manufacturing Date: February 2022 Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent Protection: 30 A / Type 1 Short Circuit Protection: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Circuit Diagram: P35-001221 Cooling Capacity: 5.5 / 5.9 kW Refrigerant: R407-C, 2.2 kg Maximum Pressure working: 30 bar

Condition: used, Year of construction: 2017, machine/vehicle number: 33701917A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rcsdpfx Astr Iv Toguob Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 34062117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Rcjdjtr Irdopfx Agueb Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 33891917A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Rcedpfxetr Irhj Agueb Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 34102117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Rcodpotr Irwofx Agusb Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 34052117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Rsdpfx Astr Iwmjguecb Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Offering a professional CEMBRE B35-50D battery hydraulic crimping tool – a high-quality tool for industrial applications. The device is in very good technical condition, fully operational, and ready for work. ⚙️ Technical specifications: Model: CEMBRE B35-50D Crimping force: 35 kN (4 tons) Max cable cross-section: up to 150 mm² (copper) Power supply: 9.6V Ni-MH battery Rotating head: 180° Type: hydraulic, battery-powered Operation: one-handed Rodpfxoy H Ri Ae Aguecb ✅ Applications: cable lugs cable connectors LV electrical / industrial installations service and maintenance 📦 Set includes: CEMBRE B35-50D crimping tool 2x batteries charger carrying case documentation / manual shoulder strap ⭐ Advantages: Very robust industrial construction Quiet operation and minimal vibrations automatic return after crimping high precision and repeatability convenient one-handed operation 📌 Condition: Used – shows normal signs of use, fully operational technically.

Condition: used, mileage: 2,72,600 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore vary. * CLUTCH and dual-mass flywheel replaced in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, with a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys replaced, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearwards * Three-point seat belts * Tables on the back of the seats Rjdpfx Asy U A S Seguecb * DVD and monitor * TINTED GLASS * Retarder * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera * Toilet * On-board kitchen * Nozzle ventilation * Reading lights * Ski box compartment * Trailer hitch * Central locking * Raise/lower * USB connection * NEW TIRES ON FRONT AND REAR AXLE in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! * All information without guarantee * Subject to prior sale * We refer to our terms and conditions

Condition: excellent (used), I am offering a high-quality compact hydraulic power pack from the renowned brand DANA / Brevini Fluid Power. The unit is in excellent technical condition and ready for immediate use. An ideal solution for industrial, mobile, and service applications. ⚙️ Technical specifications: Manufacturer: Dana SAC Germany GmbH / Brevini Year of manufacture: 01/2023 Power supply: 12V DC Motor power: 0.7 kW Current: 100A Speed: 3100 RPM Torque: 2 Nm Pump displacement: 0.56 cm³/rev Rsdpey H Nn Rjfx Aguscb Maximum pressure: 190 bar Tank capacity: 2 liters Protection class: IP54 Duty cycle: S3 (10%) Rotation direction: CCW (counterclockwise) 🔩 Equipment included: - Brevini hydraulic solenoid valves - Valve block (manifold) - Hydraulic quick couplings - Complete 12V electric motor - Oil reservoir - Wiring harness + multipin connector 📦 Applications: These power packs are used, among others, in: - Lifts and hoists - Trailers and tippers - Industrial machinery - Mobile hydraulic systems - Automation and special equipment 🧠 Additional information: - Compact and highly efficient hydraulic unit - Dana/Brevini brand = high quality and durability - Suitable for operation in demanding conditions

Condition: used, Year of construction: 2018, machine/vehicle number: 213357, Own weight: 710 kg, Power: 20 kVA Rsdpfx Asy Rvrkogujcb

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Rsdpfx Asy R Npijguscb Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 177 operating hours Features and technical specifications: - Edge Control PPC 322 W control system with 21.5" 16:9 color touchscreen - ECO MODE energy saving function - Motorized pressure bridge adjustment - Extendable workpiece support 600 mm - Extension for extendable workpiece support - LED entrance light, 3-color - Motorized adjustment of infeed fence - Long infeed fence - Air cushion table BS 301 - iTronic package - Jointing milling unit FG201 with 2 milling heads, 64 mm high Rcsdpsy Rgwqefx Agusb - Edge feeding unit 1903 - GluJet GJ 301 adhesive application system - Automatic glue height adjustment (sensing nozzle) - Cartridge storage for 4 cartridges - GluJet collection container - Pressure unit DW 301 with motorized NC axis - GM301 spray device after pressure unit with lubricant for high-gloss edges - Kappa unit 1918 pneumatic (60 mm) - Extraction hoods for Kappa unit - Milling unit FR301 MOT6 - Corner copying unit FF 301 MOT 1 incl. motorized horizontal axis adjustment - Shelf program - Scraping unit ZK301 MOT4 with high-gloss package - Surface scraper FK701 - Complete spray device for separating and cleaning agent - Buffing unit Availability: short-term Location: Flörsheim

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (max.): 420 A, ESAB Power Mig LAW 420W – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 420 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Burnbacktime adjustable End current Including: 4-metre welding torch, ground cable with clamp, gas hose, and 1-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Redpfxezakr Ao Aguscb We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.