Used Retos W 100 A for sale (88,808)

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Lsdpfx Akef A D Nmsmsru Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: used, functionality: fully functional, power: 64 kW (87.02 HP), overall weight: 10,400 kg, empty load weight: 7,435 kg, Year of construction: 2011, operating hours: 1,100 h, HAMM DV65 VO tandem roller Year of manufacture: 2011 Lrodpfsykn Ntox Akmeu 1,100 operating hours 7,435 kg - 10,400 kg Spreader connection Edge cutter wheel All steering modes Working width up to 275 cm

Year of construction: 2020, condition: used, Year of manufacture: 2020 New: No Lsdpjz H Rhmjfx Akmsru Field of application: Construction Serial number: H11690 Please contact Christopher Oldenburg for more information

Condition: new, The Newpower Generator proudly presents their new NWK100 Soundproof Plus Series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical specifications: Model: NWK100 Soundproof Plus emergency generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA4DF2-12D, 4 cylinder, water cooled Generator: Newpower NW/N100 Continuous power: 72 kW / 90 kVA Maximum power: 80 kW / 100 kVA Noise level (7m): 64 dB Connection: 1x5P 125A, 1x5P 63A -, 1x5P 32A -, 2x2P 16A Schuko sockets, FI protection circuit breaker Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH) : 3070x1130x2150 mm Weight: 1930 kg Diesel tank: 250 L. (possibility to connect to an external tank) 100% load l/h 17.9 75% load l/h 13.6 50% load l/h 9.0 Price: €14,880.00 + 19% VAT = €17,707.20 Invoice with VAT shown will be created additional costs 100A automatic switch: € 620 250A automatic transfer switch Shipment: Lrodpfx Aksl Iy Iiomju - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address Legal Disclosures

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Capacity: 15-100 kg/h Year of manufacture: 1998-2006, multiple units available Please arrange an inspection by phone. We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. We will, of course, take care of all formalities. Loading possible. Lrjdeh Ibgpspfx Akmou

Condition: new, The Newpower Generator proudly presents their new NWK100 Soundproof Plus Series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation Lsdpfenkam Tsx Akmsru - Grid monitoring, grid feed-in - Ready for immediate use Technical specifications: Model: NWK100 Soundproof Plus emergency generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA4DF2-12D, 4 cylinder, water cooled Generator: Newpower NW/N100 Continuous power: 72 kW / 90 kVA Maximum power: 80 kW / 100 kVA Noise level (7m): 64 dB Connection: 1x5P 125A, 1x5P 63A -, 1x5P 32A -, 2x2P 16A Schuko sockets, FI protection circuit breaker Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH) : 3070x1130x2150 mm Weight: 1930 kg Diesel tank: 250 L. (possibility to connect to an external tank) 100% load l/h 17.9 75% load l/h 13.6 50% load l/h 9.0 Price: €14,880.00 + 19% VAT = €17,707.20 Invoice with VAT shown will be created additional costs 100A automatic switch: € 620 250A automatic transfer switch Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address Legal Disclosures

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). Ledpfx Aeh Ad E Hekmoru 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, functionality: fully functional, mileage: 1,29,904 km, power: 106 kW (144.12 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 2,310 kg, overall weight: 3,000 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, suspension: steel, number of seats: 3, loading space volume: 5 m³, Year of construction: 2012, Equipment: ABS, air conditioning, power assisted steering, Refuse collection vehicle: + Toyota + Dyna 100 D-4D + First registration: 04/06/2012 + 129,904 km + 4-cylinder diesel engine, 2,982 cc; 144 HP + 3-seater + 5-speed manual gearbox + Reversing camera + Airbag + Air conditioning Ledpfox Igz Rox Akmjru + Electric windows + Amber beacon + Unladen weight: 2,310 kg; GVW: 3,000 kg Refuse body: + Faun / Provence Benne + M50 TH LC SAD + 5 m³ aluminium trough + Bin lift + Compactor Vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typographical mistakes excepted; subject to prior sale!

Condition: used, mileage: 1,19,000 km, power: 162 kW (220.26 HP), first registration: 10/2017, fuel type: diesel, overall weight: 10,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 3,300 mm, loading space width: 2,150 mm, loading space height: 400 mm, Year of construction: 2017, Equipment: ABS, crane, Iveco Eurocargo 100 - 220 / 4x2 Platform 3,30 m + CRANE Imported / accident-FREE IN GOOD CONDITION! YEAR OF PRODUCTION: 2017 MILAGE: 119 000 km EQUIPMENT ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? AIRCONDITION ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 330 x 215 x 40 cm (L x W x H) TOTAL WEIGHT: 10 000 kg CAPACITY: 5 000 kg TIRE SIZE: 225/75R17,5 WHEELBASE: 370 cm SUSPENSION: SPRING CRANE: PALFINGER PC 1500 A Lrjdpfewa Hubex Akmou TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 57079

Condition: used, functionality: fully functional, mileage: 15,700 km, power: 183.87 kW (249.99 HP), first registration: 07/2009, fuel type: diesel, color: red, number of seats: 9, From our immediately available stock of used vehicles, we offer you: Fire engine HLF 10 ALL-WHEEL DRIVE 4x2 on IVECO FF140E25 The LF10 is the standard fire engine for rural areas and small towns. It is suitable for both firefighting and technical assistance operations. General data: • First registration: 07/2009 Lrsdpfeznkkysx Akmeu • Mileage: approx. 15,700 km Chassis: • IVECO FF140E25 4x2 with 250 hp (185 kW) • Manual transmission • Trailer coupling Cab: • Standard crew cab (1:8) in RAL 3000 (fire engine red) • Mountings for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Magirus • HLF10 superstructure according to DIN standard • Three large side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mountings for standard equipment • Mountings for 2 additional compressed air breathing apparatus Vehicle pump/fire extinguishing agent tank: • Magirus FPN 2000-10 fire extinguishing centrifugal pump • Output: 1,000 l/min at 10 bar • Water tank: 1,000 l • Foam tank: 120 l Firefighting equipment: • Fixed, quick-attack hose reel, long, on top, G6 Safety and lighting • Area lighting on the superstructure • Pneumatic lighting mast We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather provides information. Subject to prior sale!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: DG11000SE, overall weight: 210 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 8 kW (10.88 HP), output frequency: 50 Hz, type of output current: three-phase, nominal power: 8 kW (10.88 HP), nominal power (apparent): 10 kVA, continuous power: 8 kW (10.88 HP), total length: 1,050 mm, total width: 700 mm, total height: 860 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the portable power generators for your uninterrupted power requirements. Newpower generator DG11000SE -3D model power generator The DG11000SE -3D power generator offers you a continuous output of 8 kW with its reliable 4-stroke 3000 rpm engine. You can operate the DG11000SE -3D power generator with its 30L tank for up to 8-10 hours. You can start the generator using the electric start or the cable pull. The starter battery is charged during operation, making it easy to start the next time you use it. Lredpotmuwijfx Akmsu TECHNICAL DATA Frequency (Hz): 50 Maximum power (kW): 8.0 Rated power (kW): 7.5 Nominal voltage (V): 230/400 Power factor (cosφ): 1.0 DC output: 12V/8.3A Power: single-phase-three-phase Generator type: self-excited alternator, 2-pole single-phase or three-phase Starting device: E-start or rope pull Noise level (7m): 70-73 dB Tank capacity (L): 30 Dimensions: 1050x700x860 mm Weight: 210kg ENGINE DATA Model: HR198FA Engine type: Diesel engine four-stroke, air-cooled, vertical cylinders Bore* stroke ( millimeters ): 98*84 Fuel: Diesel Oil lubrication Quantity (L): 2.0 Combustion system: Direct injection Functions Voltmeter: Yes Sockets: Yes Circuit breaker: Yes Oil light and oil alarm: Yes Wheels: Yes DC switch: Optional Control unit: Optional ATS: Optional Remote control: Optional

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker Ljdpfx Asxb U Txokmjru 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: new, mileage: 20 km, power: 129 kW (175.39 HP), first registration: 04/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, USB port, air conditioning, retarder, = Additional options and accessories = - Air conditioning (driver) - Air conditioning - Webasto heater = Further information = Damage: none Ledpfezyu Sxjx Akmjru = Company information = We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Ljdpfx Akszaa Uaomjru Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: ready for operation (used), Baldor BSC1005-24 drive controller ID: 21137B SN: 0595MG22118 - Input: 320VDC / Output: 0-250VAC Lrjdpfey Npw Rjx Akmju

Condition: ready for operation (used), Baldor DBSC1005-GAAW-2 servo drive INPUT DC320V ID/No: ASR28687G Serial number: 3899MG13652, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Lredpjy Np A Tefx Akmju

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFW350685510018, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrjdpozqxv Nefx Akmeu

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 36 m/min, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, total width: 2,400 mm, total height: 1,800 mm, power of feed motor: 5,000 W, jointer table length: 1,200 mm, table length: 1,200 mm, number of spindles: 7, 7-spindle moulder with 6 PowerLock spindles. All spindles are electronically controlled (except for the planer head). CNC PowerCom control. Working width: 20-230 mm, Working height: 8-160 mm, Ledpfx Akoy At Efomoru Feed speed: 6-36 m/min, 5 kW, with electronic variable speed drive. 1.2 m infeed table. Automatic lubrication pump (Waxilit). 8 pneumatic pressure shoes and 3 rollers on the table. Configuration: Bottom horizontal spindle 5.5 kW Right vertical spindle 7.5 kW with PowerLock Left vertical spindle 7.5 kW with PowerLock Right vertical spindle 7.5 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Bottom horizontal spindle 11 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Fully reconditioned four-sided moulder.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Easier and more efficient entry into automated welding Automated arc welding cell for small and medium production runs – easy to operate and highly productive The welding cell impresses with its particularly simple operation and programming. With minimal training required, you can put the machine into operation, program it, and operate it; video tutorials are sufficient. Depending on the component and batch size, you can use the welding cell in a 1- or 2-station operation. For example, you can process either a larger component or smaller components in larger series in parallel. You will receive the system without a safety enclosure or as a fully equipped machine tool, TÜV-tested and with CE certification. This also includes extraction, an enclosure with glare protection, and safety technology according to TRUMPF standards. Technical details + equipment: Base model price from: €103,800 (without safety enclosure) Includes: 6-axis, collaborative industrial robot arm for easy programming Teach pendant with graphical user interface on a 12" touchscreen TRUMPF operating plugin for welding with predefined welding parameters for easy, direct programming on the robot Training & Services: Operator course Installation course 12 months warranty Remote service agreement in the first year Lrjdpfezh I Hxjx Akmsu TRUMPF quality All over the world, our fast remote service support takes care of your needs. You can find more technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design of many thousands of sheet metal fabrications in Germany alone. We pass this experience on to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts in software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We would also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with financial and entrepreneurial challenges.

Condition: used, Year of construction: 2016, Trotec Speedy 100 R (30 Watt CO2) – Year of manufacture 2016 Offered for sale due to business closure. A reliable, professional Trotec Speedy 100 R with a 30W CeramiCore laser source. Ideal for engraving and cutting wood, acrylic, leather, and plastics. Condition: The machine starts up immediately, connects perfectly with JobControl, and engraves/cuts properly. Maintenance: The machine has been idle for some time and requires maintenance. The filters of the extraction system need to be replaced, and the axes/mirrors need to be realigned. The price has been adjusted accordingly. Operating hours: Due to a known display error (overflow bug) in JobControl, incorrect hours are currently being displayed. The official, encrypted Trotec Service Log file (9.1 MB) is available for serious buyers to demonstrate the machine's history. Specifications & Accessories: Working area: 610 x 305 mm Includes Trotec Atmos extraction system (filters need to be replaced) Includes all original cables Location: Riemst / Vroenhoven area (Belgium), close to the Dutch border (Maastricht). Lrodpjzd Utdefx Akmeu Sale conditions: Sold in its current condition ("as is, where is"). Assistance with loading is available. A very competitive fixed price for quick buyers.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. Lsdpfezghc Dox Akmeru 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Lodpfx Ajyrhd Tskmsru If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: used, maximum load weight: 930 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2023, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,560 mm, total height: 895 mm, Gross vehicle weight: 1,300 kg, high loader trailer, with overrun brake, 100 km/h, rear tipper, equipped with BAST-Ing PumpFast cordless drill pump. Errors and prior sale excepted. Lrjdpfx Aoym Ig Rekmou

Condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 180 kg, empty load weight: 150 kg, shovel volume: 1 m³, Year of construction: 2026, LK100 Laboratory Jaw Crusher - Stone crusher pilot scale crusher Ljdpfx Aksytnl Tsmoru

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 770 mm, total length: 1,220 mm, total width: 500 mm, Tested forklift battery for your forklift - 48V 6PZS 930Ah - DIN C + 1 year warranty + includes Aquamatic filling system + includes end discharge cables & REMA 320 plug (other plug types can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 500 mm Height: 770 mm Weight: approx. 1,350 kg Compatible with the following models and others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 16 - 1120-00 Lrodey Rnttjpfx Akmou Linde R 16 - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R. 20 - 1122-00 Linde R 20 F - 8923-00 Linde R 20 F - 8923-00 - side battery change Linde R 20 G - 1120-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 HD - 1120-00 Linde R 20 HD - 1120-00 - front battery change Linde R 20 W - 1120-00 Linde R 20 W - 1120-00 - front battery change Linde R 25 - 1120-00 Linde R 25 - 1120-00 - front battery change Linde R 25 F - 8922-00 Linde R 25 F - 8922-00 - side battery change Linde R 25 F - 8922-00 - vertical battery change Linde R 25 F - 8923-00 - side battery change Linde R 25 F - 8923-00 - vertical battery change Linde R 25 W - 1120-00 Linde R 25 W - 1120-00 - front battery change Still FM 20 Still FM-X 20 Still FM-X 25 Jungheinrich ETV 214 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV 460 Toyota/BT VR 1.25 Toyota/BT VRE 150 Crown ESR 4000-1.6 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5260 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UHX 200 Caterpillar NR2042H Caterpillar NR20NH Caterpillar NR25N2X Hyster R2.0H Hyster R2.0HD Hyster R200HD Mitsubishi RB14-25 Mitsubishi RB20NH Yale MR 25 Common battery sizes available on request. Transport available.