Used Rhtc Hb 28 for sale (5,648)

Year of construction: 1992, condition: ready for operation (used), A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Laodoxqgxxjpfx Ag Ajf

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Lajdpszp Eyxofx Ag Ajf -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 105/85/H63 mm -Total weight: 2.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/85/H63 mm Lasdpfszp Eyrsx Ag Ajf -Total weight: 2.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Lasdpfx Agezfgd Re Ajf -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/85/H60 mm -Total weight: 2.9 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 105/85/H63 mm Laodjzp Exbopfx Ag Aof -Total weight: 2.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft Lsdpfx Agjzp D Ubj Ajaf -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 95/85/H60 mm -Total weight: 2.9 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 340 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Lasdpfx Aoywg Sbjg Ajf Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2026, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system Ljdpfjzpwmdox Ag Asaf - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: used, Year of construction: 2020, operating hours: 12,536 h, Equipment: all wheel drive, Internal vehicle number: MK300023 Available immediately at our yard in Kaufungen For more information, please contact: Luis Lucena Viktoria Sologubova Hitachi ZW310-6 wheel loader with bucket – 28 tonnes – 12,536 operating hours German Hitachi ZW310-6 wheel loader, manufactured in 2020. Powerful machine with a 212 kW engine, all-wheel drive, enclosed operator's cab, and a large loading bucket. Technical specifications: * Vehicle number: MK300023 * Condition: Used machine * Category: Wheel loader * Manufacturer: Hitachi * Model: ZW310-6 * Year of manufacture: 05/2020 * Operating hours: 12,536 h * Engine power: 212 kW (approx. 288 hp) * Permissible total weight: 28,000 kg * Permissible front axle load: 14,500 kg * Permissible rear axle load: 15,000 kg * Permissible towing weight for off-road operation: 19,000 kg * CE marking * German machine Equipment: * All-wheel drive * Large loading bucket * Bucket included Lodpfx Aeym H Rzog Aeaf * Enclosed operator's cab * Work lights * Exterior mirrors * Heavy-duty off-road tires * Articulated steering Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are reserved. Financing example: * Internal number: MK * Purchase price: €66,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €1,040.02 * Residual value: €12,380.00 If you are interested in this offer or would like to customize it to your needs, please contact Mr. Enchev. We look forward to hearing from you. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, empty load weight: 6,300 kg, maximum load weight: 11,700 kg, first registration: 04/2008, next inspection (TÜV): 10/2024, total length: 9,400 mm, total width: 25,500 mm, total height: 39,000 mm, suspension: air, tire size: 445/45 R 19.5 /13mm, wheelbase: 5,000 mm, front tire size: 445/45 R 19.5 /13mm, operation weight: 18,000 kg,

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 07/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2022, Equipment: ABS, KÄSSBOHRER stainless steel tank semi-trailer, 28,000 liters for AdBlue First registration 05/2022, from first owner Mileage 288,952 Tank saddle trailer made of V2A stainless steel, 100 mm insulation, Volume 28 cubic meters, with 2 baffle plates. The front baffle plate is closed at the bottom, so that approximately 5,000 liters remain in the first compartment above the kingpin. Drainage is via an outlet with a butterfly valve, ending in the rear compartment. 1 x filling dome/manhole DN 500, Aluminum short chassis, Wabco trailer EBS with RSS anti-roll protection, BPW axles with disc brakes, Tires 6 x 385/65 R 22.5, Shiny aluminum rims, 1st and 3rd axles are lift axles, Access ladder on the right side of the tank, Data acquisition using BARTEC PETRO 3003 Chem with a compact controller, printer in a protected stainless steel cabinet, wireless remote control for hose reel, metering system and rear roller shutter, Ljdpszng S Hsfx Ag Aoaf 20 m dispensing hose DN 50, 1x Vogelsang rotary lobe pump GL186Q, self-priming, tank filling with its own pump, fast loading and unloading with up to 600 l/min delivery rate, Overfill protection, internal and external, Pneumatic roller shutter with wireless remote control, 2" dispensing device Very well-maintained and clean condition, immediately available RENTING is the new BUYING, and with us, full-service rentals are also immediately available.

Condition: used, mileage: 3,59,054 km, power: 290 kW (394.29 HP), first registration: 08/2019, fuel type: diesel, empty load weight: 8,000 kg, maximum load weight: 7,500 kg, overall weight: 36,000 kg, tire size: 285/70 R 19.5/12mm, axle configuration: 4x2, wheelbase: 5,500 mm, next inspection (TÜV): 05/2025, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 10,000 mm, total width: 25,500 mm, total height: 36,000 mm, front tire size: 285/70 R 19.5/12mm, operation weight: 15,500 kg, Equipment: air conditioning,

Condition: excellent (used), Year of construction: 2017, operating hours: 10,846 h, functionality: fully functional, Screw compressor, Variable28 Inverter integrated. Lasdpfx Ageznuf Uj Aef 28 kW 13 bar 4.24 m3/min Year of manufacture: 2017 Operating hours: 41,635

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Paper bag making machine PAK PROJEKT. Very good condition. Trial runs possible. Lodpsx H N D Sjfx Ag Ajaf

Condition: good (used), machine/vehicle number: 2004, Renz HB 2000 binding machine for plastic comb binding; spiral; wire-o. Laodpfx Agobq Syko Aof

Condition: new, functionality: fully functional, mileage: 2,850 km, power: 206 kW (280.08 HP), first registration: 12/2025, fuel type: diesel, overall weight: 15,000 kg, tire size: 395/85R20, axle configuration: 4x4, wheelbase: 4,150 mm, next inspection (TÜV): 12/2026, fuel: diesel, brakes: engine braking, color: brown, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 2, Year of construction: 2023, steering wheel position: left, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, power assisted steering, seat heater, soot filter, truck registration, NEW VEHICLE, first registration 12/2025, for sale on behalf of a CUSTOMER! Errors and prior sale excepted! WARRANTY EXTENSION to 36 months from the date of first registration! The cab was originally gray; it was repainted in “petra-copper-metallic” – a Land Rover color. The frame and cab were also completely waxed and preserved afterward. A spare wheel holder is now mounted at the rear under the chassis frame. In addition to the standard equipment, the following factory options are installed: Differential lock on the driven front axle Rear axle ratio i = 5.72 Spare wheel, dimension matches chassis tires Batteries 170 Ah for Eurocargo Battery disconnect switch, electrically mounted in the cab Generator 2800 Watts (24 Volt x 120 Ampere) Voltage converter 24/12 Volt (10.5 Ampere) Preparation for toll system (OBU), includes third DIN compartment, antenna and wiring on the dashboard, without receiver unit Front and ramp mirrors are manually adjustable but heated Luxury passenger seat, 4-way adjustable, air-sprung, integrated headrest and seat belt, heated, lumbar support Compressed air connection in engine tunnel console Electronic immobilizer and 3rd vehicle key Driver's seat HI-Comfort, air-sprung, with 3-stage cooling or heating function, multi-adjustable, lumbar and head support, with integrated 3-point seat belt Iveco radio DAB+, Bluetooth, integrated microphone, mini-USB / AUX-in connection, LCD display Air conditioning with manual control Multi-function steering wheel with steering wheel controls Lower bed, folding, 3-part Pollen filter for cab Rearview mirror for body width 2500 mm Windshield and side windows tinted Protective grille for headlights Sun visors for side windows, driver and passenger side Sun protection filter integrated into the windshield Auxiliary heater, diesel/air, with timer (Eberspächer, AirTronic D2), heat output 2.2 kW Preparation for roof beacons Trailer socket for 12 Volt operation, 13-pin Trailer socket for 24 Volt operation, 15-pin Fuel tank in plastic version, with 200 liter capacity, lockable Fuel pre-filter, Racor type, with separator, heated Air tank in aluminum version, number depends on suspension version and trailer version Rear crossmember, D-value 120kN Parabolic spring on the front axle Parabolic suspension on the rear axle Exhaust pipe on the left side Adjustment of exhaust pipe for fording CAN-Bus interface "CAN-OPEN" for body control Air compressor 360 ccm, recommended for trailer operation with continuous braking system For sale on behalf of a CUSTOMER! Errors and prior sale excepted! Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Pictures may contain optional equipment that is subject to an additional charge! Ljdpfszt H Acsx Ag Ajaf Delivery date by arrangement! Inspection only by appointment! Address is only the office address, not the vehicle location! Our general terms and conditions apply!

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm Lodpfszntfmsx Ag Aeaf - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile Ljdpfxoznr Sxs Ag Aeaf - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, mileage: 2,31,900 km, power: 77 kW (104.69 HP), first registration: 04/2017, fuel type: diesel, overall weight: 2,510 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 2,180 mm, loading space width: 1,720 mm, loading space height: 1,590 mm, Equipment: central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, 6-speed manual transmission, tachometer, driver airbag, radio-CD, electric windows, Carrier Xarios 200 refrigeration unit, 3-pin power connection, Euro 6, single rear door, unladen weight: approx. 1,810 kg, payload: approx. 700 kg, etc. Errors and prior sale are subject to change. For sale to businesses and for export only. !!!! Fg-5740 !!!! Key number 170 !!!!! !!!!! Test drive/inspection possible at TÜV Dekra or Fiat !!!!! NEW TÜV available upon request !!!!! All documents can be sent in advance by email or WhatsApp to check mileage, accident history, vehicle history, etc. !!!!! WhatsApp !!!!! Lsdozttqtopfx Ag Ajaf

Condition: used, mileage: 5,78,766 km, power: 205 kW (278.72 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 6,880 kg, maximum load weight: 5,110 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 6,900 mm, loading space width: 2,450 mm, Year of construction: 2013, construction height: 3,400 mm, Equipment: ABS, tail-lift, trailer coupling, Purchase or trade-in of: - Transporters - Forklifts Laodpozt Aakjfx Ag Asf - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 6,84,497 km, power: 205 kW (278.72 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 6,830 kg, maximum load weight: 5,160 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, next inspection (TÜV): 10/2026, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 6,900 mm, loading space width: 2,450 mm, Year of construction: 2013, construction height: 3,400 mm, Equipment: ABS, tail-lift, trailer coupling, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: Ljdpezt Aadofx Ag Aoaf You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 7,73,096 km, power: 360 kW (489.46 HP), first registration: 01/2010, fuel type: diesel, empty load weight: 9,600 kg, maximum load weight: 8,400 kg, tire size: 385 / 55 R 22.5 / 8mm, axle configuration: 4x2, wheelbase: 5,200 mm, next inspection (TÜV): 02/2026, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,800 mm, total width: 25,500 mm, total height: 37,000 mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 18,000 kg, Equipment: air conditioning,

Condition: new, Year of construction: 2026, CNC Lathe for Alloy Wheel Refurbishment This advanced CNC lathe is an indispensable solution for the refurbishment and precision machining of alloy wheels. It enables professional surface finishing, removal of damage, and restoration of wheels to a like-new appearance. The machine is equipped with an advanced CNC control system that allows fast programming of machining cycles while ensuring outstanding repeatability and excellent surface quality. Its compact footprint and ergonomic design make it easy to integrate into any workshop environment. It is the ideal choice for professionals seeking a productive, reliable, and highly accurate solution for alloy wheel refurbishment. Technical Specifications Parameter Specification Maximum Swing Over Bed 710 mm Maximum Wheel Diameter 28 in Spindle Nose A2-6 Spindle Bore 60 mm Chuck Manual Maximum Spindle Speed 1,500 rpm Motor Power (S1) 4.5 kW Equipment (Depending on Configuration) G-code CNC control Special wheel chuck for wheels up to 28 inches Wheel profile optimization software package Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance Available CNC Control Systems Siemens SINUMERIK 808D Siemens SINUMERIK 828D Fanuc Oi-TF Professional CNC Control Systems The CNC Alloy Wheel Refurbishment Lathe is available with professional control systems from leading manufacturers including Siemens, Fanuc, and GSK. These systems provide exceptional precision, reliability, and flexibility, making them suitable for both simple machining operations and complex production processes. Lajdpfjzpwzhex Ag Aof Siemens SINUMERIK 808D An economical CNC control designed for entry-level CNC lathes and machining centers, ideal for small and medium-sized workshops. Key Features Intuitive graphical interface with Teach-In programming for fast operator training Reliable industrial design resistant to dust and moisture Easy integration with Siemens servo drive systems Low power consumption and minimal maintenance requirements Cost-effective solution for first-time CNC users Siemens SINUMERIK 808 Advanced A modern CNC controller offering enhanced functionality while maintaining simple operation. Benefits User-friendly interface suitable for smaller workshops Rugged industrial construction Cost-effective solution for standard turning and milling applications Improved performance and programming flexibility Siemens SINUMERIK 828D A high-performance CNC system designed for demanding machining applications. Key Features Powerful processor for dynamic machining operations Advanced turning cycles and optimized tool paths CAD/CAM integration for streamlined production Expandable architecture supporting additional machine functions Excellent performance for both prototype and production environments Fanuc Oi-TF One of the world's most trusted CNC control systems, recognized for its reliability and precision. Key Features Outstanding stability during continuous production Advanced turning cycles for threading, grooving, and precision machining Fast and intuitive programming interface Proven reliability with low maintenance requirements Ideal for high-volume industrial applications

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Lasdeyrf I Aopfx Ag Aof Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: used, Year of construction: 2025, First registration: 17.03.2025 2-axle tank vehicle with 28 cbm steel tank Tank: - Tank diameter: 2150 mm - Paintwork: RAL 9006 silver - Interior with special coating - Integrated baffle plates - Agitator with hydraulic slide gate - 2x 6.00m aluminum troughs for hose storage - Open ventilation and venting with collection container Laodpoxf Ak Hjfx Ag Asf - Front fill level indicator with automatic pump overfill shut-off - Suction connection center right/left and rear, 150 mm (6 inch) mechanical slide gates - Rear suction swivel arm with mechanical slide gate - 10 inch pipe at rear, slanted from tank down to tank sump Chassis: - BPW axles, 60 km/h - TÜV approval at 40 km/h - 10t axle load - 32t gross vehicle weight - Air suspension - Self-steering trailing axle - Tires: 445/65 R 22.5 - Brake drum: 410/180 mm - Axle spacing: 1810 mm - 4 polyethylene fenders Lighting: - Truck underride guard with LED tail lights - 2 rear LED work lights (1028) Vogelsang 6 cbm Pump VX-186-260 - Vogelsang Pump VX-186-260 with Vogelsang injection system and carbide interchangeable liners (1028-F) 80 km/h axle KTD - 80 km/h axle with ABS on KTD 28, automatically lockable steering axle incl. ABS/EBS (1273) Hand wash tank - Custom fabrication (1028-X) Pneumatic 6" gate valve instead of brass gate valve 6" per piece (1028-E) Front LED work light under hose tray (1028-A) Top docking funnel 8", hydraulically operated brass gate valve (1099) Tank paint - Tank in RAL 9006 Kumm silver Location: 54595 Prüm