Used Robot-Polishing Machine 500 for sale (74,399)

Condition: used, Year of construction: 2010, machine/vehicle number: ET179, Used Sacmi Labeling Machine Opera year 2010 overhauled in 2025 Model: Opera 400 (2010) • Speed: 45,000 Bottles/hour • Status: ready for operation • Formats: 500 ml, 1 L, 1.5 L. Reconditioned OPP roll-fed labeler, overhauled in 2025. This overhauled labeling machine delivers stable high-speed performance for multi-format lines and qualifies as robust bottle labeling equipment for continuous production. Performance and Specifications: The Opera 400 maintains consistent output at 45,000 BPH with quick format changes across 500 ml, 1 L, 1.5 L. Two labeling stations support continuous operation, with automatic label adjustments and manual head adjustment to keep tolerances steady at speed. This is a reconditioned OPP labeling machine. Work performed during the 2025 overhaul: The jacks The plates The glue roller were overhauled The roller motor was replaced New safety guards were installed The printheads were overhauled Knedpfx Ajz E Dl Asnuec All glue heating unit probes were replaced The suction unit hoses were replaced, and the entire electrical system was inspected Components and Functionality: Equipped with 25 plates, the Opera 400 uses a mechanical cam brake/clutch for plate movement to maintain precise synchronization at full speed. The label feed is roll-fed (coil). With 2 labeling stations, the machine supports continuous application while minimizing downtime. No. of plates25 Rotation direction0 Plate movement1 (mechanical cam brake/clutch) Number of stations2 Labeling method7 Label placement5 Optical centering system0 Head adjustment1 (manual) Optimization and Maintenance of Used Sacmi Labeling Machine: Manual head adjustment gives technicians direct control for fine-tuning, while automatic label adjustments reduce operator intervention during run. The 2025 refurbishment addressed wear parts and safety elements, supporting reliable uptime typical of bottle labeling equipment in high-throughput environments. Conclusion: Sacmi Opera 400 (2010), overhauled in 2025, combines 45,000 BPH throughput, roll-fed OPP application, 25 plates, and 2 stations with multi-format capability (500 ml, 1 L, 1.5 L). Ready for operation.

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm Knsdpfecrd Nmsx Anuoc

Condition: used, Polish Lathe / Polishing Machine Kodpfx Ajz I Dh Aenuenc Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm - Automatic cycle management - Pedal operation - Digital position display Knedsxdr Skjpfx Anusc Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: excellent (used), Year of construction: 2010, COMEVA MB 500 Planer/Jointer Working width: 510mm Kodpfx Asiwa Spjnujnc 4-knife cutterhead Traditional knives Length of work tables: 2630mm Adjustable fence, tiltable at 45° Motor power: 4kW Smoothing combs CE certified

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 Knjdjz Aaw Sepfx Anuoc - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: reconditioned (used), SIMEC strip polisher with 8 heads on belt, working width 2000mm, thickness 100mm. Suitable for marble and granite. Includes tilting roller loader and roller table. Capacity: 2000mm x 100mm. Very good condition, serviced. Machine dismantled and loaded onto truck. Contact by phone in French, by email in your language. Kodpexb D Npefx Anuenc

Condition: new, Year: 2023 • Type: Robotic pick and place cell • Robots: 2 x Stäubli TS2-80 SCARA robots • Robot reach: 800 mm Knedpfx Aoy An Egenusc • Robot payload: 8.4 kg each • Guarding: Full enclosed safety cell • Controls: Integrated control cabinet with HMI • Teach pendants: 2 fitted • End of arm tooling: Vacuum gripper heads fitted • Conveyor system: Infeed/outfeed conveyors included • Application: High-speed food/product pick and place

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Knodpfx Anjx Hx T Asusc Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, planing width: 500 mm, total length of planing tables: 2,950 mm, total width: 1,400 mm, total height: 1,300 mm, overall weight: 1,460 kg, total length: 2,950 mm, workpiece width (max.): 500 mm, warranty duration: 12 months, Equipment: CE marking, MADORA Sp. z o.o. is a Polish manufacturer specializing in industrial machinery for woodworking and metal processing. Since 2013, we have been supplying reliable, high-quality machines tailored for both small workshops and large-scale production facilities. Knjdpfx Aewzwvfjnuoc All our machines are designed and manufactured in Poland, ensuring European quality, durability, and performance. Whether you’re aiming to expand your woodworking capabilities or upgrade your workshop, our solutions are engineered to meet professional standards while being user-friendly and cost-effective. The D500 Planing Machine is designed for the initial preparation of wooden elements by precisely leveling the surface. The D500 planer was developed with the needs of the most demanding customers in mind. Despite its substantial size, the machine features a stable frame and state-of-the-art design—hallmarks of MADORA products. One of the key features of the D500 is its table length—2,950 mm—which enables precise machining of even very long workpieces. The MADORA D500 is an excellent choice for both small carpentry shops and large-scale production plants. Thanks to the incorporation of a gearbox with an adjustment knob, controlling the thickness of the planed layer is significantly easier and smoother. An adjustable planer shaft guard ensures maximum user safety while maintaining operator comfort. With the output table’s easy adjustment system, the operator can effortlessly position the table to create both concave and convex surfaces.

Condition: used, Stedler SAM-BA-MAT E 500 Shrink wrapping machine AM-BA-MAT E 500 Shrink packaging machine Functional description The machine is used for individual or collective wrapping of packages with polyethylene shrink film. * Operating principle: Semi-automatic and pneumatic. * Process: The product is manually fed via a size adjustment slide; all subsequent steps (banding, further transport to the shrink tunnel) are carried out automatically. * Sealing process: A continuously heated safety sealing unit separates and seals the film. A Teflon cloth prevents the film from sticking to the sealing blade. Film roll placement * Positioning: The rolls are placed on pairs of support rollers at the top and bottom. * Adjustment: Adjustment rings limit the film laterally with a clearance of approximately 1–2 mm (adjustment is made using an Allen key). * Preparation: The film ends are guided through the sealing unit. By moving the infeed carriage back and forth once, the separating sealing process is pneumatically initiated, creating the so-called film curtain. * Film material: Processes two rolls of flat shrink film made of polyethylene. * Film thickness: The recommended standard thickness is 40 µm (micrometers). * Film alignment: The rolls are fixed with adjustment rings, allowing for a lateral clearance of 1–2 mm. * Film width: The maximum width is 210 mm. * Control: The machine operates pneumatically and is activated via a manual infeed slide. Machine data Manufacturer: Stedler Type: SAM-BA-MAT E 500 Operating voltage: 230 V Connected load: 0.75 kW Knjdpotzbkkofx Anuec Operating principle: Semi-automatic and pneumatic [Image content] Dimensions (L x W x H): 1500 x 1170 x 1300 mm Year of construction: 2004 Sealing & film specifications Maximum temperature: 250 °C Sealing readiness: approx. 1.5 s Film material: Flat shrink film made of polyethylene (PE) [Image content] Film width: up to 210 mm Film thickness: 40 µm (micrometers) More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: used, functionality: limited functionality, machine/vehicle number: 118 255, distance between centers: 2,500 mm, year of last overhaul: 2016, The machine is operational and in production use and can be inspected after prior arrangement. Delivery in November 2026. No delivery service is included; dismantling and transport are the responsibility of the buyer. Two 5-ton cranes are available for loading. Kjdpfx Anoz I T A Asuenc The sale is made without any warranty or guarantee, and only to commercial buyers, plus VAT; no liability for material defects. Maximum distance between centers: 2500 mm Maximum height between centers: 250 mm The machine has limited functionality because the feed mechanism occasionally fails to operate. The sale includes the coolant system.

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual operation. Drive power: 5.5 kW Polishing disc diameter: 1000 mm Knjdpfxsfiuguj Anuec

Condition: ready for operation (used), DAREX AP 5000 / Precision spiral drill grinding machine -CE marking -Grinding range 1.5 - 26 mm -Suitable for standard spiral drills (HSS cobalt, optionally carbide) -Grinding types: conical taper, and automatic cross-grinding (split point) to reduce the transverse cutting edge -Automatic operation -Various inserts Dimensions: L x W x H 0.5 x 0.5 x 0.4 meters / Weight 50 kg Errors and omissions excepted. Kjdpfx Anoy U H Eceuenc

Condition: used, Year of construction: 1988, used, good condition cleaned, tested manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg Ksdovwf Trspfx Anusnc total connected power ca. 1,5 kW located in 97447 Gerolzhofen sale in current condition as on Foto seen - free on truck -

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Knsdpfx Ansxxaiteuoc

Condition: used, Year of construction: 2004, Technical details: Kedpfxjtrbcbs Anuenc screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Robot system core pulls hot runner controller -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) *

Condition: new, NEW MACHINE - double sided belt linishing and polishing machine, different configurations possible, for working in seated or upright position - linishing / linishing - linishing / polishing - polishing / polishing Kjdpfxoci Tlie Anuenc Motor 4, 5.5 or 7.5 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm - 3 different speeds can be choosen: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t - Working range X axis: 2500 mm Kjdpez Aalvofx Anujnc - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Kjdjz Aarcspfx Anusnc Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 1995, Sunnen Eclipse EC-3500 CGM-27 Bore diameter – Honing range 1.5 – 165 mm Stroke length – Honing length 6 – 170 mm Knedjzl U Evspfx Anusc Spindle speeds: 200 – 3,000 RPM Stroke rates: 60 – 500 strokes Total power consumption – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1,200 kg

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. Kjdpfx Asmxkdponuenc MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Total length: 12500mm Ksdpfxsiqghze Anusnc

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 1,945 mm, total height: 1,375 mm, total width: 1,206 mm, input voltage: 400 V, overall weight: 600 kg, year of last overhaul: 2026, roll width: 580 mm, air pressure: 6 bar, film width: 580 mm, Equipment: CE marking, Vertical Packaging Machine Ilapak Vegatronic 500 VT500 The machine is in very good condition and ready for operation. - Maximum package width: 270 mm - Minimum package width: 50 mm - Maximum package length: 350 mm - Maximum film width: 580 mm - Sealing jaw width: 300 mm - Sealing jaw type: constant heat - Control: PLC, HMI Omron - Memory: 40 programs - Power supply voltage: 400V AC Ksdpfxjyw Ud So Anusnc - Output up to 100 pcs/min - Machine dimensions: 1206x1945x1375 mm - Machine weight: 600 kg - Possible integration with weigher, printer

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm Knedpfx Ansdzqn Dsuec - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.