Used Rubber Injection Molding Machine (1) for sale (1,12,913)

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Fpjdpfszd Ta Nex Afpoi Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: used, Year of construction: 1991, operating hours: 2,000 h, Name: Used injection molding machine Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year built: 1991 Hours of operation: 2000 h Driving force: 15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Empty weight: 3400 kg Technical doc.: Yes Message: General Data: Dry cycle rate: 40 min, Pump drive: 15 kW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Displacement: 116 cm3, Screw stroke: 120 mm, Maximum part weight: 99 g, Maximum injection flow: 505 g/s, Calculated injection capacity: 15 kW, Plasticizing flow: 29 g/s, Screw length: 22 LID, Maximum screw speed: 430 min, Maximum screw torque: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle compression force: 65 kN Clamping unit: Clamping force: 500 kN, Mold opening stroke: 350 mm, tool installation height min.: 200 mm, platen distance max.: 550 mm, ejector force: 34 kN, ejector stroke: 150 mm, clear distance between columns max.: 355×355 mm, clamping plate max.: 540×540 mm. Fpsdpfxexl R Sxs Afpoi Accessories: With two tool tempering devices. Condition: Second hand Price: By request

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Fodpfszgvxyox Afpopi Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: • Machine is available for immediate delivery • Condition: very well maintained / regular servicing • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2022, operating hours: 12,000 h, We are offering this machine for sale due to a cancelled order. Screw: 40mm / HC version! Core pulls: 2x Blow-out: 2x Selective extraction unit Tool heating: 12x Fedszg Hufopfx Afpepi Includes Multilift Select 4x vacuum 4x pressure

Condition: excellent (used), Year of construction: 2015, operating hours: 29,500 h, functionality: fully functional, machine/vehicle number: 231000, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 2,000 bar, injection weight: 434 g, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines from the current model year 2010 onwards. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. Manufacturer: Arburg Type: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Operational status: fully functional Condition: very well maintained - German origin - from first owner Extras: 2 x core pull units Thermoplastic cylinder, complete, 55 mm, highly wear-resistant Thermoplastic processing Open nozzle 55mm Clamping plate set 570 central 125 mm Selection unit - extended graphics - extended tool protection - extended travel movements - extended clamping - production control - job change Complete documentation - electrical diagrams, etc. Injection unit Screw diameter: 55 mm Injection weight: 434 gr./PS Injection pressure: 1650 bar Injection volume: 474 ccm Clamping unit Clamping force: 200 tons / 2000 kN Fedpfx Afsw Tt R Iopepi Tie bar distance: 570 x 570 mm Clamping plates: 795 x 795 mm Tool installation height: 300 mm Max. distance between plates: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connection value: 45 kW Visible peripheral devices are not included in the scope of delivery. The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's premises against reimbursement of freight costs - worldwide delivery possible Available from our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell our own machines purchased from ongoing production from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not an intermediary dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse.

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm Fpsdpju Nu N Rofx Afpsi closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: DR. BOY Typ: 22 D Baujahr: 2004 Schließkraft: 22 Tonnen Fodozardgepfx Afpjpi Holmabstand: 254 x 254 mm Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: used, Year of construction: 2010, ARB669/SN240807 ,ARB820/SN260146 ,ARB798/SN202406 ,ARB777/SN182789V02 ,ARB777/SN182789V.03 ,ARB654/SN116761 , ARB805/SN228296A ,ARB809/SN216338V.02 ,ARB816/SN235404 ,ARB757/SN165210V.03 ,ARB790/SN188463 ,ARB814/SN224328V.02 , Fodpfx Asuyf Daefpopi ARB657/SN116712 ,ARB818/SN257017V.02 , SELOGICA

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine Hersteller: DR. BOY Typ: 22 D Baujahr: 1999 Schließkraft: 22 Tonnen Holmabstand: 254 x 254 mm Fodpfx Afezaqzdspopi Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Injection Unit Screw Diameter: 55 mm Injection Volume: 650 cm³ Fjdpfx Ajzc Efcsfpspi Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Clamping force [kN]: 350 Number of components: 1 Clamping plate width [mm]: 390 Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Fedpfx Afeygh Rvepepi Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Fpedpfxeygib Ne Afpsi Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Fedpfx Asyf Ha Hsfpspi Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Fsdpsygiafsfx Afpopi Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Fodeygikwepfx Afpjpi Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Fjdpsyguk Aefx Afpepi Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Fsdpfx Afeyguhhjpepi Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: excellent (used), Year of construction: 2013, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 763 cm³, injection pressure: 1,905 bar, injection weight: 695 g, mold height (min.): 350 mm, overall weight: 15,540 kg, Basic data Model: 1450 injection unit / 350 t clamping force Year of manufacture: 2013 Control system: NC5 Fjdpjzcnm Nofx Afpjpi Injection unit Screw diameter: 60 mm Injection volume: 763 cm³ Injection shot weight: 695 g Specific injection pressure: 1905 bar Screw L/D ratio: 20 Clamping unit Clamping force: 350 t Tool plate dimensions: 1040 × 1060 mm Distance between tie bars: 720 × 720 mm Mold height: 350–745 mm Opening stroke: 730 mm Maximum plate distance: 1475 mm Ejector stroke: 200 mm Dimensions and weight Dimensions (L × W × H): 7.64 × 2.01 × 2.27 m Weight: 15,540 kg Tooling and equipment 4 × hydraulic core 12 heating zones for the mold 2-circuit pneumatic cascade control Indunorm quick couplings 2 pneumatic valves on the moving platen Increased pump drive power activeDrive – pump with adjustable speed activeProtect – active mold protection Wear-resistant screw Bimetallic cylinder Injection with p+v regulating pump (closed loop) EUROMAP 67 robot interface

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW Fpjdpfxjvkqfao Afpji weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Fpodezb Ivhjpfx Afpei Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm Fodpoxwva Eefx Afpepi - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: excellent (used), Year of construction: 2001, operating hours: 99,000 h, machine/vehicle number: 154855, clamping force: 1,500 kN, screw diameter: 45 mm, The machine comes from a cleanroom environment used in medical technology and is in excellent condition, both visually and technically. Thanks to the prescribed regular maintenance, it has always been carefully maintained. Fedpozdyk Isfx Afpjpi

Condition: excellent (used), Year of construction: 2011, operating hours: 54,980 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 90 mm, clearance between the columns: 1,350 mm, displacement volume: 2,290 cm³, injection pressure: 1,839 bar, mold height (min.): 978 mm, opening stroke: 1,020 mm, plate width: 1,710 mm, plate height: 1,650 mm, overall weight: 35,000 kg, number of injections: 1, Equipment: documentation/manual, KRAUSS MAFFEI KM 420-4300 CX with OVERSIZED CLAMPING UNIT Year: 2011 Pump Hours: 54.968 Control: MC 5 Injection unit, it is STANDARD for this type of machine: Screw: 90 mm Shott volume: 2290 cm3 Injection pressure: 1.839 bar Fodpfxozcam Ue Afpepi The Clamping unit is oversized: Plates: H x V: 1.710 mm x 1.650 mm Tie bars distance H x V: 1.350 mm x 1.250 mm Min mould: 978 mm Daylight: 1.998 mm Because of that the weight of the machine is 35.000 kg instead of 24,2 t. The machine is built with Clamping force: 350 t, because of such needs from the buyer. The machine has possibility to start injection 2-3 mm before machine lock the mould. Last service: 26.05.2025. Last inspection: January this year. Condition of the Screw: Cmk is 3,62 Changed Accu bottles. It is possible to get some video on it in running and can be sent by WhatsApp. The machine is available some time W 35-38 (August- Sept). Until that it will be in running, but with very short series. We are speaking only about the machine, no other equipment is included. Maybe, it will be one SEPRO robot (big one) from one other machine, not this on the photos. Model: 5X – 35 Year: 2017

Condition: used, 12 Arburg 370H machines for sale. Machines with high-quality equipment. Machine manufacturing years: 2018 (2 units), 2019 (2 units), 2020 (2 units), 2021 (2 units), and 2023 (4 units). Machines are ready for transport. Dismantled by Arburg. Low operating hours (approximately 8,000). All machines include handling and cell systems. Fpedpfozd Ti Rex Afpei

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 Fodpfezcaxdox Afpepi CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic