Used Screw Compressor S015862 for sale (7,471)

Condition: ready for operation (used), Year of construction: 2022, Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible. Gedpozhw Rtefx Akajug

Condition: new, Year of construction: 2026, LUFT screw compressor represents a modern solution in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. The LUFT 1000 stands out with its direct drive system, which delivers significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output with reduced energy consumption. The compressor generates a maximum pressure of 10 bar. Full control over operating parameters is provided by an intuitive electronic control panel from the MAM series, giving access to key compressor data and increasing flexibility and process control. Technical specifications Motor power: 7.5 kW Voltage: 400 V / 50 Hz Air delivery (0–6 bar): 990 L/min Air delivery at 6 bar: 950 L/min Air delivery at 8 bar: 950 L/min Gsdpfx Aey E Hpcokasug Air delivery at 10 bar: 930 L/min Outlet connection diameter (G): 1/2" Dimensions: 810 × 610 × 850 mm Weight: 160 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. Gjdpeyll Enefx Akasug technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) noise level: 62 ± 2 dB(A)

Condition: good (used), Year of construction: 1993, Screw compressor, compressor, compressed air unit, stationary compressed air compressor Gedpfx Aozulbtekasug -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos -Dimensions: 730/690/H1315 mm -Weight: 291 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 13.98 m³/min Guedpfxjwrrgme Akajg Speed: 4050 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort.

Condition: excellent (used), 7.5 kW motor 1000 rpm Gusdpfx Akszvnrwoasg Pressure: 10 bar Tank: 350 liters

Condition: excellent (used), Year of construction: 2020, Kaeser screw compressor SK 22 - 11 bar - Top condition - Volume flow at 11.0 bar (gauge) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (gauge) 13.7 kW Max. overpressure 11.00 bar Efficiency of drive motor at full load 91.2 % Gedpfxjzrhh Ds Akaoug Efficiency class of drive motor IE3 Rated power of drive motor 11.0 kW Speed of drive motor 2960 1/min Type of protection of drive motor IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable volume of warm air 2500 m³/h Compressed air connection G 1 Coolant volume 7.0 l Coolant type Compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: available from warehouse 54634 Bitburg - immediately available -

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Gjdpfsy Dp Swjx Akaoug Year of manufacture: 2017

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 5.2m3 COMPRESSOR 2019 DIESEL compressor ATLAS COPCO XAS 88 after full service Technical data: capacity 5.20 m3/min; working pressure 7 Bar; production year 2019; KUBOTA engine mileage 1519h!!! compressor fully operational net price: 58800 zł Guedpfx Aerdf Swekasg gross price: 72324 zł Below is a link to the video , showing the work of the machine

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty - Gsdsvmivcepfx Akaeug

Condition: good (used), Year of construction: 2018, Screw compressor BLITZ Monsun Fast 11-10, serial number iYD0099288, manufactured in 2018, output 11 kW, maximum pressure 10 bar. Godpsztcyqjfx Akajug

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Hello, For sale: a SCS 30-08A screw compressor. In working order. Ready for use. We have 3 units available. The price stated applies to 1 unit. Guedpfx Ajzhux Iskajg The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact us by phone between 7:00 AM and 3:00 PM.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Gedpfxjzu Aibj Akaeug Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, Hello, Gedpfx Aszhux Uskajug For sale: SCS 30-08A screw compressor. In good working order. Ready for use. The price stated in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Please contact us by phone between 7:00 AM and 3:00 PM.

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Gjdpszh Nizsfx Akaeug

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters Gjdpfjq E Iraex Akaoug • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Guedpjrh E Dqofx Akaog Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: ready for operation (used), Offered are two identical, belt-driven, sound-insulated Alup screw compressors. Power: 7.5kW, operating pressure: 10bar, capacity: 1m³/min, weight: approx. 215kg. An on-site inspection is possible. Godpfx Ajztrb Dokaoug

Year of construction: 1997, condition: good (used), Build in 1997 Power 75 KW Pressure: 9 bar Gedpfx Aeg A Dypokajug

Condition: good (used), Year of construction: 1988, Manufacturer: Atlas Copco Gusdshyglaepfx Akaog Type: GA 230 Max. final pressure: 13 bar Free air delivery: 50 l/sec Motor power: 30 kW Max. speed: 1500 r/min

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 250 1998 Characteristics: Capacity 7.50 bar Gusdpfx Aovyrq Ajkaeg Power 245 kW Voltage 500 V

Condition: used, Year of construction: 1998, feed pressure 8 bar liter capacity 1,65 m³ / min dimensions 1000 x 750 x 950 mm Godpfx Aoqa Tw Nskajug total power requirement 11 kW weight of the machine ca. 175 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 21,506 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 388.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Screw compressor, Kaeser BSD75SFC Inverter integrated 37 kW 10 bar 6.47 m3/min Year of manufacture: 2015 Operating hours: 21,506 Gjdpfx Akjztr I Djajug

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Capacity 7.50 bar Gujdpfxjvyrtdo Akajg Power 245 kW Voltage 500 V

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage Gusdpfxoztx Ans Akasg -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg