Used Scribing Prism for sale (352)

Condition: new, neu ca. 2 Wochen ab Auftragse 257.02 € Nedpoyukbmofx Aqvjlb 80 mm 28 mm 120 mm 12 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary

Condition: new, neu ca. 2 Wochen ab Auftragse 571.15 € 120 mm 40 mm 200 mm 33 kg Nlsdpeyui Ulofx Aqvsb [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 71, Finger Jointing Line GOMA FC10 KZ6 + FC10 PZ6 TENONER FC-10KZ-6 Milling spindle 50 x 210 mm Main motor 18.5 kW Chipper 300/60 x 8 mm, 6 kW Scribes for "line-to-line" jointing 2x160mm, 1.1 kW Working table width 600 mm Package height 30 to 150 mm PRESS FC-10PZ6 Package width 30-150 mm Thickness 20-70 mm Hydraulic pump 100 bar Finished board length 6000 mm Possible intermediate cuts, e.g. 2x3000mm, 6x1000mm, etc. Machine in good working condition, used. Good technical condition. Price 110,000.00 PLN net, negotiable. Nlodpfxjy Sw Uvo Aqvjb

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Nedpfx Ajmck Ryoqvolb Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Year of construction: 2015, pressure 30 t stroke 300 mm daylight between the columns 700 mm dayligth 850 mm 140 mm Nlodpfsy Umbwjx Aqvob diameter of piston 60 mm table surface area 700 x 390 mm weight of the machine ca. 0,35 t dimensions of the machine ca. 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Nljdpsy N Arusfx Aqvob -Clamping plate: Scribing and marking plate -Length: 800 mm -Width: 800 mm -Height: 128 mm -Sheet thickness: 23 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 800/800/H128 mm -Weight: 136 kg

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology Njdpfx Aoulnb Djqvelb - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate -Length: 1500 mm -Width: 1010 mm -Height: 170 mm -Sheet thickness: 44 mm -Quantity: 1 mounting plate available Nedpfxey Nduqe Aqvelb -Price: per piece -Transport dimensions: 1010/1500/H170 mm -Weight: 633 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available -Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece Nodpfx Asy Ndtyeqvelb -Weight: 9500 kg/piece

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, AUTOMATIC VENEER SPLICER Flat Maximum prism width 700 mm Maximum prism height 850 mm Maximum prism length 4.2 m Main drive motor 55 kW Danfoss frequency converter for the main motor Main wheels - cast iron - rubber in the middle Main wheels - width 100 mm Diameter of main wheels 1050 Lifting/lowering of the splicer spindle Motor power for lifting/lowering 4 kW Double-sided saw - PV 45, length 7470 mm, thickness 1.2 mm + stellite, width 140 mm Electronic infinitely variable feed of the splicer forward and backward with Danfoss frequency switch 1.5 kW+W63 Digital setting of dimensions with automatic cutting program V-280 - veneer program Hydraulic 40l tank with 13l pump and 4 kW electric motor Complete hydraulic pipes Automatic hydraulic tensioning of the saw + accumulator Hydraulic guide for the saw blade on the left - linear veneer guide + automatic retraction below 100 mm Hydraulic guide for the saw blade on the right - linear veneer guide + automatic retraction below 100 mm Hydraulic arm for pushing lamellas back Additional arm for adjusting lamella pushing Separate control panel from the splicer 8-button 4-position joystick 8-button 2-position joystick + potentiometer Laser 15 mW with holder Camera on the splicer from the front (view of the prism) and start of cutting Automatic water cooling of the saw blade up and down, with water filter, high-pressure water pump Opening for dust extraction - from the front + connection Ø 250 mm Fan 5.5 kW + dust extraction pipe Ø 250 m Central lubrication + automatic electric Wider wheels for feed of the splicer forward and backward and additional protection of switches and track cleaner Welded reinforced track 8500 mm Hydraulic clamp with two cylinders and wedges for prisms 4 pcs Hydraulic lifting/lowering of wedges 4 pcs Hydraulic lifting with automatic roller for prism feed 4 pcs Total lifter 1 pc Hydraulic corner - centering device 3 pcs Nlsdpfx Asy R Tcmeqvob Turner 3 pcs Automatic output belt SILON 4 m with 1 m extension, + electric motor 1.5 kW - belt lifts and lowers automatically Mechanical roller conveyor for veneer l=4000 mm Inlet ramp (conveyor) for prisms

Condition: good (used), Year of construction: 1990, machine/vehicle number: 8390, Offer 26135 Technical data: - Pressing force, continuously adjustable 25 t - Stroke, continuously adjustable 300 mm - Torque at the rotary shafts 6900 Nm - Speeds at the lower rotary shafts 4 + 8 rpm - Speeds at the upper shaft, continuously adjustable 2 - 12 rpm - Digital + analog display of actual values - Drive 400 V / 6 kW - Space requirement approx. W 1480 x H 1100 x D 800 mm - Weight approx. 1300 kg - Bending capacity when tools are available Nlodey Tyadopfx Aqveb - Edges with W 125 120 x 16 mm - Straightening without straightening bar 100 m³ - Pipe (pressing process) 2 " - Ring bending (flat material, upright) 80 x 10 mm - Ring bending (round tube) 60 x 4 mm - Mandrel bending 60 x 2.6 mm - Round bending (flat) 70 x 12 mm - Bending tools: - Bending tools, pointed tools + prisms - Various other pipe bending tools, incomplete

Condition: used, Year of construction: 2026, total height: 600 mm, total length: 2,400 mm, total width: 1,200 mm, Colour: Grey Welding table / Clamping table * Drilled holes! * Diagonal grid! Dimensions: 3000x1500mm Table-thickness: 15mm Hole-diameter: 28mm Nedpfx Aqoynzy Hevolb Extras at extra cost - 4x 3D Angle 300mm - 6x Stop 150mm - 6x Stop 225mm - 1x Protractor  - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Transport dimensions: 2400mm x 1200mm x 600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) Nledpowka Upefx Aqvob - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. Nodpfx Aqsytn Emovslb CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,100 h, control type: CNC control, laser power: 4,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 310 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, Equipment: cooling unit, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 3030 fiber (L49) (A1) 11/2013 4 kW 3. Technical Specifications Working area: 3000 × 1500 mm Operating hours (04/2026): Beam ON: 9,100 h Machine ON: 31,000 h 4. Maintenance & Condition - Maintained annually by TRUMPF - New IPC installed in 01/2026 (cost: 12K EUR; old IPC with broken network port can be used as a backup) 5. Standard Machine Configuration Working Area & Machine Design Working area: 3000 × 1500 mm Fully enclosed machine frame Enclosed beam guidance via light cable (LLK) Integrated cabinet with roller shutter Sliding roof Working area illumination Integrated electrical cabinets with interior lighting Drive & Motion System Torque drive combined with linear direct drives Automatic pallet changer in longitudinal direction Longitudinal conveyor belt Process Support Cooling unit Positioning laser diode Spray device Automatic nozzle cleaning Transport and installation equipment Cutting Technologies PierceLine FocusLine NitroLine PlasmaLine Microweld 6. Laser Standard Laser Configuration Integrated solid-state laser with 1 LLK output Pump diode excitation Laser power control Extended Laser Configuration TruDisk 4001 solid-state laser with 1 LLK output Upgrade capability for max. 1 additional LLK output on the TruDisk 7. Cutting Unit Standard Configuration Universal cutting unit Single cutting head strategy Protective glass against lens contamination Protective glass condition monitoring ControlLine: height control and sheet edge detection Extended Configuration Nozzle changer DetectLine: precise sheet position detection Copper cutting package (including cutting data for N2, O2) Brass cutting package (including cutting data for N2) 8. Control System & Software Operation & Programming TruTops Laser via network access (customer-provided PC required) Easy workshop programming Fast reproduction of jobs Integrated technology database Automatic shutdown function Programmable cutting gas / pressure selection Control System Nlodpey S U N Rsfx Aqvsb Sinumerik 840D SL control system 17" touch color display Software & Process Functions ContourLine Microweld FastLine FlyLine AdjustLine Remote teleservice via internet 9. Data Transfer & Interfaces Standard Interfaces USB interface RJ-45 network connection Extended Interfaces MDE interface 10. Safety & Environmental Systems Safety Features CE certification Light barriers Machine enclosure with certified viewing window (right-side door) Extraction & Dust Protection Multi-chamber extraction system Compact dust extraction unit Dust protection for equipment sheet metal 11. Material Handling & Automation Conveyor & Handling Systems Wide cross conveyor with tilting container Container positioned on the left side of the machine Automation Options LiftMaster retrofit 12. Tube Cutting Device / RotoLas Tube Processing Equipment Tube cutting device incl. 4 internal and external jaws (including electric roller roof, left-side sliding inspection door for enhanced visibility, and accessory trolley; integrated cabinet with roller shutter omitted) Components Automatic chuck External support for tubes up to 3 m (incl. 1 stepped roller) Base jaws for additional clamping sets Prism clamping set First base carrier with shifting device (longitudinal pallet changer) Additional base carriers 2 × workpiece carriers D 15–310 mm Clamping claws (2 pcs.) 13. Warranty / Sales Notice No warranty Purchased as is.

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm Njdpei Amnpsfx Aqvolb SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Additional equipment • Joystick box • Tailstock • Spring-loaded tailstock • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection • Connector with connection slots • MAG1 mounting • Spring clip 15° (short) • Spring clip 15° (long) Njdpfxsx D D Abo Aqvelb • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip • The maximum length measurement deviation in the XY plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • Accuracy XY: (2.5 + 0.006 µm) • Accuracy Z: (5 + 0.006 µm)

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: on a solid mobile base -Clamping table: 415 x 415 mm -Table height: 845 mm -Sheet thickness: 90 mm -Base: 2 support casters, 2 swivel casters with locking brakes -Dimensions: 530/530/H845 mm -Weight: 162 kg Nodpsy D I Ausfx Aqvslb

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid mobile base -Clamping table: 1500 x 500 x 150 mm -Table height: 1010 mm -Sheet thickness: 30 mm -Plate: with supporting ribs -Overall dimensions: 1530/710/H1010 mm -Weight: 320 kg Nlsdoqzl E Njpfx Aqvsb

Condition: ready for operation (used), Year of construction: 2019, Door panel postforming line Kraft / Costa / IMA / Bürkle / Homag Coating line consisting of: Gantry feeder Brand: Kraft Year of manufacture: 2019 Technical specifications - With vacuum lift - 2 feed roller conveyors - One transport roller conveyor for onward transport Wide-belt sanding machine Brand: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 Consisting of: Wide belt sander (sanding from below) Technical specifications - Contact roller - Electronic shoe sanding unit - Cleaning brush - Intermediate conveyor belt, length approx. 3000 mm Wide-belt sander (sanding from above) Technical specifications - Identical equipment Complete formatting, laminating, and postforming line Consisting of: Roller conveyor system Brand: Kraft Year of manufacture: 2019 Technical specifications - 3 individual elements - Centering station Double-end profiler Brand: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical specifications - Equipped with feed conveyor and alignment station - Scoring saw at the bottom - Splitter - Flazer - Prism cutter - Joining cutter - Cross-edge milling unit - 3 profiling milling units - Brushes Laminating system consisting of: Feed conveyor belt Brand: Kraft Year of manufacture: 2019 Glue applicator Brand: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical specifications - With infeed table, manufacturer: Kraft - Steel platform with stairs and various pumps - Glue melting unit GWK Eco 03A Infeed Table for Laminating Machine Brand: Kraft Year of manufacture: 2019 Laminating Machine Brand: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical Specifications - New Siemens Simatik KMG Touch control system - Bürkle GLK calender - Includes film holder and saw for trimming excess material - Working width 1300 mm - 2 GWK temperature control units - Column-mounted swivel crane for loading paper rolls - Unloading conveyor belt Postforming machine Brand: Homag Technical specifications - Infeed table - With 2 saw units (horizontal and vertical) - Intermediate buffer with 4 levels - Infeed to the postforming machine - 2 identically configured processing sides with gluing - PU pre-melting unit Nordson / VersaBlue, built in 2020 and 2004 - Pressure zone with turret magazine for various profiles Njdoy Dr Hqjpfx Aqvolb - Various milling units and buffing brushes - 2 cooling units BEKO Bekoblizz LC, built in 2020 Conveyor belt with inspection system - Swivel arm with vacuum suction cup - Inspection station for visual inspection of the workpiece Portal destacking Brand: Kraft Technical data - With vacuum portal and 3 destacking stations Automatic cross-transport cart Brand: Kraft Year of manufacture: 2018 Technical specifications - Roll width: approx. 1400 mm - Roll length: approx. 2800 mm Used door panel postforming line Kraft / Costa / IMA / Bürkle / HomagCoating line consisting of:Gantry feederBrand: KraftYear of manufacture: 2019Technical specifications- With vacuum lift- 2 feed roller conveyors- One transport roller conveyor for onward transportWide-belt sanding machineBrand: CostaType: KK7 CT CT 1350Year of manufacture: 2018Consisting of:Wide belt sander (sanding from below)Technical specifications- Contact roller- Electronic shoe sanding unit- Cleaning brush- Intermediate conveyor belt, length approx.

Condition: new, Year of construction: 2026, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, Nledpox Urucofx Aqveb OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2026, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Blade shaft diameter mm 80 Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Njdpfx Aqolz S Rbevjlb Overall dimensions mm 2720x2515x2105h

Condition: new, Year of construction: 2026, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Nedpshpbu Rjfx Aqvelb ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 Nljdpfx Ajhpbxieqvsb optional: softstarter start

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Nsdpfxegd Iago Aqvelb Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)