Used Sft Tbm H8-1-400 for sale (85,724)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Pre-milling unit Gluing unit with glue pot Edge trimming unit Corner rounding unit Edge and glue scraping unit Polishing brushes Control: StarTouch with touchscreen Ledpfx Asyziutekfsrk

Condition: ready for operation (used), Grinding wheel dimensions: 175 x 25 mm Lrsdpfx Aeyv Dr Ajkfsk Grinding wheel speed: 3000 rpm Electrical connection: 220 V, 250 W Space requirement: 400 x 230 x 215 mm

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm Lsdpfx Aovuungjkfork

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C13K2W900259, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 4.879 kg Functional Generator capacity: 400 kVA Ledpfxewby Abs Akfork CE mark: yes Other information Fuel consumption: 62.2 Liter / Hour at 75% Load Generator: Caterpillar LC6114B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 842 l Transport dimensions (LxWxH): 4,93x1,62x2,22 Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: RZB00174, fuel type: diesel, motor manufacturer: C9.3B, General information Field of application: Construction Weights Empty weight: 2.300 kg Functional Generator capacity: 400 kVA CE mark: yes Ljdpfxoxxn N Uj Akfjrk Other information Fuel consumption: 61 L/hr at 75% load Generator: SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Transport dimensions (LxWxH): 2,662x1,12x1,766 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Lrodsxzpt Hspfx Akfjk

Year of construction: 1990, condition: excellent (used), functionality: fully functional, machine/vehicle number: 32531, Used Reifenhäuser extruder Type: RH 801-1-90-30 Ljdpfx Akjw Np S Tjferk with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate The plasticizing capacity depends on the material and shape Fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: used, maximum load weight: 27,228 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2021, * Schmitz Cargobull, 3 axles * Refrigerated semi-trailer, double-deck, without beams * Thermo King SLXi 400 (diesel & electric) * Diesel operating hours: 5,742 * Pallet box * Unladen weight: 8,772 kg * Permissible total weight: 39,000 kg * Gross weight: 36,000 kg Lredpfjyyt D Aex Akfsk * Payload: 27,228 kg * Axle 1: 8,000 kg * Axle 2: 8,000 kg * Axle 3: 8,000 kg * VIN: WSM00000526796 * Year of manufacture: 08.09.2021 * TÜV valid until 09/2026 * Price on request ----* Phone / WhatsApp :

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2206A-E13TAG2, General information Field of application: Construction Weights Empty weight: 4.575 kg Functional Generator capacity: 400 kVA CE mark: yes Other information Fuel consumption: 52.6 Liter / Hour at 75% Load Prime Lodpfx Akeyz Sk Rsfjrk Generator: FG Wilson FG29A280 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 888 l Transport dimensions (LxWxH): 4,93x1,66x2,15 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, mileage: 4,36,000 km, power: 291 kW (395.65 HP), first registration: 06/2017, fuel type: diesel, tire size: 385 R 22.5, axle configuration: 8x4, wheelbase: 7,100 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 10,430 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, = Additional Options and Accessories = - 8x2 configuration - Aluminum fuel tank - Digital tachograph - Air suspension - PTO (Power Take-Off) - Radio/CD player - Reversing camera - Sun visor = Further Information = Lrjdpfx Akoyz A Hpsfjk Technical Data Number of cylinders: 6 Engine displacement: 10,837 cc Axle Configuration Front axle 1: Tire size: 385 R 22.5; Steered; Tread depth left: 20%; Tread depth right: 20%; Suspension: leaf spring Front axle 2: Tire size: 385/65 R 22.5; Steered; Tread depth left: 20%; Tread depth right: 20%; Suspension: leaf spring Rear axle 1: Tire size: 295/80 R 22.5; Twin tires; Tread depth left inner: 40%; Tread depth left outer: 40%; Tread depth right inner: 40%; Tread depth right outer: 40%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 295/80 R 22.5; Steered; Tread depth left: 20%; Tread depth right: 20%; Suspension: air suspension Weights Unladen weight: 15,465 kg Payload: 21,535 kg Gross vehicle weight (GVW): 37,000 kg Functionality Crane: PALFINGER PK 17502, year 2003, mounted behind the cab Platform height: 135 cm Condition Damages: none

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016 Lodpfx Akeyuya Eefsrk

Year of construction: 1996, condition: ready for operation (used), Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible. Ljdpfx Akjyyy Nrjfsrk

Condition: used, diameter / mm hollow / mm chuck width / mm weight / kg HES 400/115 power chuck from BERG with jaws Ledpfx Akjytycqofsrk Type: HES 400/115

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 2,50,000 kg, overall weight: 4,00,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : Lredoytrxkspfx Akfok - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, functionality: fully functional, overall weight: 26,330 kg, Used Ermak press brake type Speed - Bend Pro 400 ton x 4100MM, year 2015, 6 axes, Delem Control. Wila quick tool clamping system, 1 set of tools and multi lower die. Lrodpfx Aex Sxn Rokfjk

Condition: new, Year of construction: 2026, machine/vehicle number: 20251017003, fuel type: diesel, motor manufacturer: Perkins 2206C-E13TAG2, General information Field of application: Construction Weights Empty weight: 4.550 kg Functional Generator capacity: 400 kVA CE mark: yes Other information Lrjdoyy Uafepfx Akfjk Fuel consumption: 58 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 580 l Transport dimensions (LxWxH): 4,16x1,6x2,15 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Reading type . 0 Lredpfoyycxvox Akfjk weight - pallet system . kg length . mm 1 Posten Bügelmessschrauben 400-500 mm 700-800 mm 800-900 mm 900-1000 mm The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) Lrjdpsyg I Ihefx Akfsk • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) Lsdpfsx D E Dysx Akfjrk • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: FANUC, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: approx. 105 mm • Spindle nose: A2-type (depending on configuration) Ljdpfxoybbius Akfsrk • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) Lredpex D Hgvefx Akfek • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages Lrsdpfxjyg I Egs Akfjk • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), controller manufacturer: HAITIAN, This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Aditional information • Haitian handling system • Protective enclosure • Conveyor belt for parts storage Ljdpfx Akox D Rbqoferk

Year of construction: 2005, condition: ready for operation (used), Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Ljdpfx Asyxq Upekferk

Condition: new, Year of construction: 2026, Edge Sander Description: Sanding of curved materials using a side table. Lsdpfsvuggzsx Akfork Simple and quick sanding belt replacement using a lever. Movable aggregate ensures horizontal and vertical operation. Additional table with adjustable height included as standard. Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size: 2010 x 152 mm Worktable size: 790 x 221 mm Table height: 810 mm Stand height: 600 mm Additional rounding table size: 514 x 221 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Edge and face sanding at an angle: 0 - 45° Belt speed: 840 m/min Motor power: 1.1 kW Power supply: 400 V Weight: 75 kg The price quoted is the net price. It does not include transportation costs