Used Sicko Outfeed Mechanisation for sale (868)

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Kdodox T Ai Ijpfx Ahaol Voltage: 230/400 Volt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m

Year of construction: 2001, condition: used, Packer for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Bottle holders: 5x20, 7x9 or 10x6 bottles. Additional title: Packing machine for bottle crates Output according to design: 4000 crates/h Current output approx.: 3000 crates/h Air consumption: 0 Nm³/1000 bottles Current: 17,59 A Voltage: 220/400 V Frequency: 50 Hz Compressed air: 4 - 5 bar Length: 3680 mm Width: 2940 mm Height: 2610 mm Kdsdpex T Attjfx Ahajl Weight: 4200 kg Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles Running direction: left -> right Operation / Control: converted to manual / PLC defective Material: stainless steel / painted black steel Position: free standing Base construction: rectangular cycle packer machine on four columns with spherical feet Features: Plexiglas safety screen opening upwards, safety grid, infeed and outfeed conveyors, packing head equipment for 0.5 l, 1.0 l and 1.5 l bottles, control panel converted to manual operation

Condition: used, Year of construction: 2012, functionality: fully functional, Adelco Jetforce Dryer 150 - Natural gas dryer - Belt width: 150 cm - Oven length: 300 cm - Cooling bridge after the oven - Infeed belt: 200 cm - Outfeed belt: 150 cm Kjdpfx Aex Nwinshaodl The dryer is very efficient and reliable. We process output from two automatic MHM presses through it. Can be seen and tested daily in our production facility.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 13,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 30 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 30 m/min, total width: 7,000 mm, total length: 21,000 mm, total height: 5,100 mm, overall weight: 80,000 kg, mount diameter: 50 mm, The Pama Speedram 1000 is a versatile and powerful floor drilling and milling machine designed for heavy industrial applications. This machine offers advanced features and specifications that meet the highest standards of precision and efficiency. PAMA automatic head change system PAMA MG4 high speed head: 8000 rpm & 20 kW PAMA CU130-90S tool changer: up to 1300 kg tool weight Chip conveyor: 235 mm and 1200 mm outfeed height Double base plate field: 4000 x 2500 + 4000 x 2500 mm Spindle torque: 1525 Nm Floor drilling and milling machine: cast iron column, gray cast iron, hydrostatic guides, geometric compensation RAM type: 360 x 400 mm with spindle Ø150 mm Note: No cooling system, dry operation. X - axis: 13000mm Y - axis: 3500mm Z - axis: 1000mm W - axis: 700mm Speed: 6 - 3500 (8000)Rpm Power: 37kW Kjdpfju Avwvex Ahaedl Ram dimension: 360 x 400mm Tool holder: 50ISO/Bt/Mk Feed X - axis: 30000mm/min. Feed Y-axis: 20000mm/min. Feed Z-axis: 30000mm/min. Feed W-axis: 30000mm/min. Tool changer: 90 Control: 840D Number of controlled axes: 4 Length: 21000mm Width: 7000mm Height: 5100mm Weight: 80000kg

Condition: good (used), Year of construction: 2012, Used Bomar bandsaw with dual column system Model: Individual 620.460 DGH Capacity: 620 x 460 mm Double mitre Year of manufacture: 2012 Includes 6 meter infeed conveyor + 6 meter outfeed roller conveyor with measuring system Kdedpfx Asy Rktiehasl

Condition: used, Year of construction: 2018, functionality: limited functionality, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for print shops that need to switch flexibly between rigid sheet media and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color gamut: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Kdedjy Thc Hspfx Ahaol Year of manufacture: [2018] Condition: Technically and visually in good condition. The machine only ran in a single-shift operation and was consistently maintained. Availability: Available [immediately] or by arrangement. Location: [83410 Laufen D] Scope of delivery: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). On-site inspection and print samples are available after prior appointment. More pictures or information on request.

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Raw mother-board width before longitudinal ripping: 900–1260 mm • Panels are longitudinally divided prior to digital printing and coating operations • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal ripping system with up to 5 saw cuts plus 2 trimming units for production of finished plank widths from 160–510 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) / Alternative stacking configuration maximum stack weight: 3500 kg Kjdpoy N U Rcefx Ahasdl • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Line 1 – Hessapp Line 1 consists of 3 Hessapp lathes integrated with gantry loading. Following the turning operations, the line includes: Kdedoy S Ty Uspfx Ahael • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 2 – Maus Line 2 consists of 3 Maus lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 3 – EMAG / Diedesheim / Unisign Line 3 consists of: • 2 EMAG VSC 500 DB machines • 2 Diedesheim VDM55-11 machines • 1 Unisign Univers 6 for gear machining • Complete robot automation including infeed and outfeed conveyors

Condition: good (used), Year of construction: 2006, functionality: fully functional, Line 1 – Hessapp Line 1 consists of 3 Hessapp lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 2 – Maus Line 2 consists of 3 Maus lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 3 – EMAG / Diedesheim / Unisign Line 3 consists of: • 2 EMAG VSC 500 DB machines • 2 Diedesheim VDM55-11 machines • 1 Unisign Univers 6 for gear machining • Complete robot automation including infeed and outfeed conveyors Kodpoy S Tx Djfx Ahajdl

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Kdodpfx Asw Sy T Hjhasl

Condition: used, Year of construction: 1997, machine/vehicle number: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower) and crosswise brush for table width, collects residual dust from components 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4,5 – UV lamp with conveyor – one lamp illuminating from above 6 – Quick Wood System RO1400 brushing machine 7 – Venjakob spray booth – 8 spray guns 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, temperature and airflow can be regulated in 3 zones 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well 15 – Four-shaft brushing machine with individual height and speed adjustment for each shaft Kdodpfxjy Sn Sro Ahasl 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for light surface dust removal 18 – Venjakob spray booth – single-circuit, but can be switched to a second by exchanging the entire spray gun rack (a spare is included) and switching the pump (two pumps included) 19 – Roller conveyor; lineup supported by photoelectric sensors for loading the dryer 20 – 14-shelf drying oven 22 – Outfeed table with two speed levels depending on the unloading speed required by the finishing line.

Condition: ready for operation (used), functionality: fully functional, OPTI 599 - year 2019. The OPTI 599 is a high-performance crosscut saw which can increase your productivity by up to 30% compared to traditional ones. Designed for use in high-production lines for heavy-duty non-stop operation, it employs a hardened steel helical toothed roller drive system incorporating a powerful brushless motor that guarantees a 260 mt./1’ feed speed. Cutting takes place by means of a connecting rod movement controlled by a brushless motor with 0.15 second cutting times. The rejects are ejected at the rear at the moment of cutting and the sizes are separated at the exit on the sorting belt by means of lateral ejectors. The board dimensions and the defects marked with fluorescent chalk are detected by a separate reading station. TECHNICAL DATA OPTI 599 Blade diameter mm. 450/550 Motor power kw. 5,5/7,5 Feed speed mt./1′ 260 Cutting capacity mm. 45×200 (ø450) 80×240 (ø550) Machine consists of : 1. Infeed conveyor-belt, width 250 mm. Length 3500 mm. Same motorization of the machine. Reading station for detection of total length of the board and of fluorescent chalk markings. 2. Optimizing Crosscut Saw OPTI 599 TCT tipped blade Ø 450mm. Motor 7.5kw. with safety brake. Cut controlled by brushless motor. Power 42 Nm Feeding thru dragging rolls with vertical pressing wheels. Dragging motor: Brushless 34 Nm. Max. feeding speed: 300mt./1’. 2 brushless motors: 1 in the infeed power 42 Nm 1 in the outfeed power 42 Nm Accuracy: +/-1mm. Cut capacity: max 260 x 30 min.50 x 20 mm. 3.Electronic control by means of touch-screen keyboard. Thru the keyboard, working parameters should be inserted, such as: length of pieces to be cut in mm., n° of pieces to be cut, Kdjdpfx Asy R Tcyjhael box where to discharge such pieces, clean cut in mm., tail cut in mm., scraps to be broken into pieces, in mm., minimum rest-piece, in mm., Furthermore on the keyboard we insert (protected by password) all parameters for the good operation of the machine. Remote support thru Ethernet rj 45. Photocell to read the quality on the side. Photocell to read the width of the boards. 5 different quality 5 different widths 4.Discharging conveyor 250 x 12.000mm. with n° 8 lateral pneumatic discharging boxes. Geared-motor 0.75kw. Recovering plane for cut pieces. H of the table of recovering H 800 mm 5. Discharging conveyor 350 x 2.500mm for small scraps Geared-motor 0.37 kw. 1 flat conveyor. 1 inclined conveyor.

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment and technical specifications: - Usable WORKING WIDTH mm: 950 - SANDING BELT LENGTH mm: 670/970 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATING ROLLER mm: 150 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER HP: 10 - BELT SPEED m/s: 18 - FEED MOTOR POWER HP: 0.75 - Variable speed feed conveyor with infinitely adjustable speed, m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER TABLES each with 2 rollers at infeed and outfeed - 1 EXTRACTION CONNECTION with 160 mm diameter - AUTOMATIC TABLE POSITIONING BASIC MACHINE ACCORDING TO CE STANDARD PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system The machine model with this system has been running non-stop since 2008 without lateral belt drift! Including special equipment: 11 kW motor Pneumatic sanding pad incl. feed-synchronized control Location: Flörsheim Availability: short notice Kdjdoy I Eqwepfx Ahajl

Year of construction: 2017, condition: ready for operation (used), A vertical glass washing system is offered. Working range X/Y: unlimited/1600mm, glass thickness: 3mm-12mm, number of brushes: 4 units, feed speed: approx. 2.5m/min, washing system: separate washing and rinsing zones, material design: housing and water-carrying parts made of stainless steel, drying: integrated high-pressure blower with air filters, control: push-button control with individual component activation. Equipped with infeed and outfeed transport frames, lighting inspection station, water pump, filter unit. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 4500mm/2500mm/1100mm. Inspection possible by arrangement. Kdsdpfx Asy Tn Najhael

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm adjustable speed Kdjdpfx Ajy Rl E Tohael mobile as new

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Kjdpfx Ahoyx Ev Ujajdl

Condition: good (used), Year of construction: 2016, Material Handling System, TGW, nominal width 420mm, approx. 1,100m – used – Ex-works price (net): now only €99,000 instead of €269,000 – dismantled, packed and loaded, including controls, supports, etc.! Manufacturer: TGW Year of manufacture: 2016 Condition: good Available: immediately Location: Niedernberg warehouse Excerpt from Hall 2 inventory: Approx. 42 units Type: KRC KingDrive Roller Conveyor A and T Ksdpfoy Iv Eljx Ahasdl Nominal width (NB): 420mm Roller pitch: 110mm Zone length: 990mm Number of KDRs per zone: 2 units Roller type: steel Conveying speed: variable, e.g., 0.47m/s Acceleration / deceleration: 1.5 m/s² Available in various versions Similar to above, only: Approx. 38 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 660mm Similar to above, only: Approx. 4 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 880mm 800mm = approx. 8 units 770mm = approx. 3 units 412.5mm = approx. 1 unit 330mm = approx. 23 units KCS KingDrive Infeed/Outfeed: approx. 8 units 420mm KCC KingDrive Curve Conveyor A and T, 90 degrees = approx. 6 units 420mm 45 degrees: approx. 3 units 30 degrees: approx. 2 units 55 degrees: approx. 1 unit Roller tracks, length approx. 100mm = approx. 33 units 420mm, plastic rollers, non-driven Toothed belt diverter/inserter K: approx. 5 units 420mm Toothed belt transfer unit K: approx. 14 units 420mm, module length: 800mm PWT Pop-Up Roller Transfer: approx. 4 units Belt conveyors: approx. 18 units BFT2000 GF Belt Conveyor Nominal width 420mm

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Kjdpfew R Hh Uox Ahaodl Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1.490,14, saw blade diameter: 500 mm, cutting height (max.): 140 mm, cutting width (max.): 350 mm, power: 8 kW (10.88 HP), overall weight: 2,000 kg, TECHNICAL DETAILS Max. saw blade length: 6,100 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Kdjdpfx Aey Nyd Ijhaol Max. cutting height: 140 mm Max. cutting width: 350 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Main motor power: 5.5 kW Total power: 8.0 kW Voltage: 400 V Fuse: 25 A Dimensions & Weight Dimensions (L x W x H): 11,250 x 800 x 1,600 mm Weight: 2,000 kg EQUIPMENT Automatic feed system

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen Ksdpfx Aoy Nx Eqjhasdl

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: B725, cutting height (max.): 150 mm, cutting width (max.): 300 mm, table length: 3,000 mm, saw blade length: 3,570 mm, Equipment: CE marking, TECHNICAL DETAILS Max. saw blade length: 3,570 mm Max. cutting width: 300 mm Max. cutting height: 150 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Infeed table length: 3,000 mm Outfeed table length: 3,000 mm MACHINE DETAILS Voltage: 400 V Fuse: 16 A Power: 5.5 kW Main motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,100 x 1,650 mm Transport weight: 700 kg Transport packages: 3 EQUIPMENT CE marking Kdedpfxjy Nxyns Ahael

Condition: not inspected (used), functionality: unexamined, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table One powered roller in the table at the outfeed. Ksdpfx Ajy S E Spshajdl Comes with tooling.

Condition: used, Colour: Grey The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Kdedpfxewnhxdj Ahajl Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 7 - └ Unit 1: - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, Working dimension X 3.086 mm Working dimension Y 2.155 mm Working dimension Z 100 mm Number of milling spindles 1 Main motor power 6,6 kW Kjdpfxoym Ebro Ahaedl Tool clamping system HSK-F63 Tool changer positions 13 Vacuum pump Feeding Lift table Outfeed Conveyor belt Safety device Bumper

Condition: excellent (used), Year of construction: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and one motor, sanding from above Working width: 1100 mm Abrasive belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 – 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st unit: Rubber-coated sanding roller, 90 Sh, 2nd unit: Ksdoy Exhwspfx Ahasdl Fixed sanding pad & air cushion sanding pad, timer controlled Compressed air requirement: approx. 6 bar Extraction connection diameter: 2 x 150 mm Approx. dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1,400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Abrasive belt oscillation Abrasive belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs newly covered graphite sanding pad inserts NEW bearings for return rollers NEW drive belts for the motor Note on used machinery: • Errors in technical specifications and prior sale excepted. • Stated prices are ex works - free loading! • Machines have been cleaned and tested for functionality. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect the machines on site. • Special arrangements are only possible in writing. (Enquiries are only answered if you provide your address and telephone number!)