Used Sip Schweiz Dividing for sale (2,142)

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest Pgodpfx Aozfbu Rolwst 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, functionality: fully functional, power: 49.28 kW (67.00 HP), first registration: 10/2013, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE Psdozdizvspfx Alwogt TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Podszdkc Ujpfx Alwogt Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation Pgodozd Riuepfx Alwst adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2013, operating hours: 33,213 h, functionality: fully functional, power: 25 kW (33.99 HP), pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, We are offering this used Kaeser ASD 47 SFC screw compressor, manufactured in 2013, for sale. Model: ASD 47 SFC Material Number: ASD.2 Serial Number: 3248 Year of Manufacture: 2013 Rated Power: 25.0 kW Pgodez Dgatspfx Alwet Motor Speed: 2945 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 °C / 45 °C Additionally, you can purchase 2 Kaeser compressed air filters in like-new condition, 1 Kaeser Aquamat CF 6 oil-water separator, and an OKS 900L air receiver. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: LEG00010357, We are offering this very well-maintained Selmi Legend tempering machine, 24 KG capacity, manufactured in 2022, including a conveyor belt R200. This machine has been used very little, as we have completely switched to the Selmi Top Ex, a larger model. Includes a vibrator and conveyor belt for operation. Pgsdpfjz Dvqbox Alwot If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2022, operating hours: 339 h, functionality: fully functional, machine/vehicle number: 22016009-T, tank capacity: 60 l, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 470 kg, year of last overhaul: 2022, water tank capacity: 280 l, Equipment: rotational speed infinitely variable, ERBA Turbo 60 W Centrifugal Grinding System – only 339 operating hours, including cascade system and sieve vibrator For sale is our ERBA Turbo 60 W centrifugal grinding system for wet processing. The system was purchased in 2022 but has only been used sparingly since then. With only 339 operating hours, it is in very good used condition. The reason for the sale is that we need the space for newly acquired equipment. Technical data and features: - Container volume: 60 liters - Turntable speed: continuously adjustable from 0 to 300 rpm - Motor power: 3.0 kW - Operating voltage: 400 V / 50 Hz - Work container and turntable with highly wear-resistant PU lining - Electric tilting device for the processing unit - Dosing pump for liquid process additives - Timer for setting the processing time - Frequency inverter for stepless speed control Accessories included in the offer: - ERBA cascade system: 280-liter tank with three chambers and a circulation pump for the circulation and reuse of the process water. Pgedpfxsz D Sr Ij Alwet - ERBA sieve vibrator YE 50: Separate sieve unit with a sieve area of 1,385 × 530 mm and a main sieve made of PE. With a discharge for grinding media in the direction of flow, a lateral discharge for small particles, and a frequency inverter for stepless adjustment of the motor speed. A little-used system with extensive equipment for wet lapping. If you are interested, we look forward to hearing from you.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1013988R, overall weight: 24 kg, total length: 355 mm, total width: 100 mm, total height: 100 mm, spindle speed (max.): 15,000 rpm, Grinding spindle TSI 100 X 355-6009 I32 R Maximum speed: 15,000 RPM Pjdpfjz D Hvhsx Alwjgt New and in original packaging Year of manufacture: 2025 New price: 4,900 EUR Stored as a spare part, never installed, and the machine has now been sold.

Condition: excellent (used), Year of construction: 2022, We can now offer 8,000 pcs. AutoStore bins in very good condition. All bins are palletized and ready for delivery, which allows for quick and easy installation in an existing system. The dimensions are 600 × 400 × 220 mm (L × W × H) and they are fully compatible with AutoStore. Thanks to all the included dividers, the bins can be divided as needed into 1-32 "compartments" in the box. Pgsdpfx Alsyfhqaewet An excellent option for those of you who need to expand capacity quickly or replace bins without long lead times. Available for immediate delivery. Shipping is additional.

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system Psdoz Df Txspfx Alwogt - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, mileage: 2,81,782 km, power: 213 kW (289.60 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: yellow, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR * ESP * Radio * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Sunroof * Driver's air suspension seat * Air intake at the top * Trailer coupling * 2-line air connection * Duomatik air connection * 12-speed * Suspension: leaf spring/air * Payload: 7895 * Continuous brake: engine brake ----Special body: Crane: Palfinger PK 13001-KB (Power Link Plus), maximum lifting capacity 5.46t, foldable, operator's platform, 3-way hydraulic extension, fully hydraulic outriggers, engine start/stop, 6th + 7th control circuit for rotary servo and grapple operation. Read load chart: lifts 3.7m-3.3t, 5.3m-2.25t, 7.2m-1.6t, 9.2m-1.22t.----Body: Logemann construction material tipper body, raised front wall, stone floor, 2-part sideboards left + right with damper relief, folding center divider, Kinnegrip fasteners. Sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis of all purchase contracts, invoices, proforma invoices, orders, sales negotiations are our general terms and conditions (see imprint for details). Pgodpoz Dlu Nsfx Alwjt

Condition: excellent (used), Year of construction: 2015, operating hours: 9,500 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total length: 2,080 mm, total width: 1,990 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 40,000 rpm, total height: 2,000 mm, rapid traverse X-axis: 44 m/min, rapid traverse Y-axis: 44 m/min, rapid traverse Z-axis: 44 m/min, overall weight: 2,100 kg, spindle motor power: 3,000 W, We are selling our Datron M10 Pro with HSC control. The machine is in excellent condition, still in use, and can therefore be inspected while powered on. We are gradually replacing our machine park, which is why we are offering this machine for sale. It has seen very little use, as it was primarily used to machine brass with a cutter diameter of 3mm. Maintenance has been carried out at regular intervals. The spindle is 2 years old and has only 1,500 hours of operation. Delivery terms: ex works, transport insurance only, no warranty. Subject to errors in the technical data. Pjdpsz Epwkjfx Alwegt

Condition: new, mileage: 100 km, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, gearing type: automatic, Equipment: soot filter, * 1 Lane Change Warning System * 1 -----Color/Paint----- 1 Chassis color: Anthracite Grey * 1 Cab color: E1980WHTE CRYSTAL WHITE * 1 Lower cab panel: Crystal White * 1 Mirror housing: Crystal White * 1 -----Tires/Wheels----- 1 Goodyear * 1 F1, 315/70R22.5GO EQMSU 158/150 L Steering ABA 3P * 1 R1, 315/70R22.5GO EQMDU 154/150 L Traction ABB 3P * 1 R2, 315/70R22.5GO EQMSU 158/150 L Steering ABA 3P * 1 RR, not applicable * 1 -----Equipment/Optional Equipment----- 1 Mechanical cab suspension * 1 Adaptive Cruise Control with FCW and AEBS-3 * 1 Emission class: Euro 6 * 1 OBD-E engine H6, fuel B7 * 1 Automated transmission, TraXon, 12 gears * 1 Standard component layout * 1 BDF pack multi-body system 1120-1320 mm, prepared * 1 Sleeper High Cab * 1 Chassis design front: Aero base plate * 1 Exterior sun visor * 1 LED headlights, cornering and fog lights * 1 Headlights with height adjustment * 1 LED skylights * 1 Two LED headlights for cab rear wall * 1 Main mirror * 1 Convex main mirror * 1 Central locking, 3 keys, 2 remote controls * 1 Adjustable roof spoiler short, Sleeper High Cab * 1 Steering wheel, leather * 1 Dashboard design: Plateau * 1 Door panel: Loosely woven fabric * 1 Driver's seat: Luxury Air * 1 Armrests on both sides of the driver's seat * 1 Passenger seat: Cinema & table, fabric cover * 1 Armrests on both sides of the passenger seat * 1 Refrigerator and drawer * 1 Upper sleeper bunk * 1 Safety net on both sleeper bunks * 1 Curtains with dividing curtain * 1 LED interior lighting: Luxury * 1 Automatic cab climate control * 1 Roller blind passenger side * 1 Roof hatch with electric operation * 1 Accessory power supply: Standard + 2x 40 A * 1 ECAS remote control with extended functions * 1 FMS connector, extended and prepared * 1 PACCAR Connect with navigation and tablet software * 1 Digital tachograph, VDO 1C, version G2V2 * 1 Speed limiter setting 90 km/h * 1 DAF Infotainment Exclusive prepared, Luxury speakers * 1 Antennas: Radio, 2x mobile phone, GNSS Extra: CB * 1 Wireless charger * 1 Emergency hammer * 1 Rear warning system * 1 Front: 8.00 t, air suspension, 161 N * 1 Front air suspension: medium * 1 MX-13 engine, 355kW/483HP, cab emblem: 480 * 1 ECO mode * 1 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * 1 Traction aid 15.0 t * 1 Rear axle ratio 2.47 * 1 Mechanical differential lock * 1 ZF Intarder * 1 Parking brake assistant * 1 Compressor 2 cylinders without clutch * 1 Wheelbase 4.80 m/rear overhang 1.62 m * 1 Longitudinal member 260/7.0 mm, continuous internal reinforcement * 1 EAS unit right, vertical battery box + 75-liter air tank left * 1 Air pressure tank made of aluminum * 1 960-liter aluminum fuel tank: 620 liters left + 340 liters right, height 620 mm * 1 Fuel tanks left and right * 1 Rear fender Pgsdpey Tgq Ajfx Alwjt * 1 Two wheel chocks * 1 Four LED work lights * 1 Rear lights with LEDs * 1 Cross member D137 + Ringfeder coupling D137 * 1 Fixed wired body signals and warnings * 1 Preparation for aftermarket switches * 1 Chassis preparation for BDF multi-system * 1 Preparation for interchangeable systems * 1 Fixed control gear auxiliary drive, no 1st gear auxiliary drive * 1 Generator 130 A, batteries 2 x 210 Ah AGM * 1 Battery energy monitoring * 1 Additional cab insulation * 1 Maximum ambient temperature 45 degrees * 1 Warranty Plus vehicle - 3 years - no mileage limit * 1 Extended maintenance interval * 1 Jack * 1 Standard

Condition: used, functionality: fully functional, machine/vehicle number: 32059, mileage: 98,300 km, power: 235 kW (319.51 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6e, suspension: steel-air, loading space volume: 10.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, reinforced clutch, manual transmission Enfach-H, group switch, front axle with leaf springs, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Psdez E Hg Nepfx Alwegt Cab C (2240 mm wide, 1620 mm long), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic air conditioning, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, Connectivity-Board module (RIO Box), sun visor on driver's door Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 10.5 m³ (sludge chamber approx. 10 m³ / water chamber approx. 0.5 m³), vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD hose reel made of stainless steel for 60 m HD hose DN 13, 40 m installed, spray gun, water chamber is welded into the front of the container with inspection opening, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, rear door hydraulically opens upwards over the entire cross-section with pipe breakage protection, hydraulic latch, sludge chamber level indicator with external scale with division every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge chute made of stainless steel, 2 pneumatically operated slide valves, container emptying: free discharge through the lower suction connection or by tilting backwards, 4-way valve pneumatically controlled from the operating station, over-suction protection, oil separator, operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left on the container, 1x LED rotating beacon at the rear, reversing camera

Condition: used, functionality: fully functional, mileage: 2,85,241 km, power: 338 kW (459.55 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Pgodpsz E E U Eofx Alwot I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Tyres Information Front left - 6 mm Front right - 6 mm Rear left inner - 8 mm Rear left outer - 8 mm Rear right inner - 9 mm Rear right outer - 8 mm

Condition: used, Year of construction: 2011, Technical Specifications & Performance Data This 20,000 L aseptic tank is engineered for hygienic storage and buffering in beverage production and industrial packaging environments. It combines a newly manufactured pressure vessel with proven aseptic system heritage, making it a strong solution for second hand installations and used bottling line upgrades. Nominal capacity: 20000 L Design pressure: 0.09 to −0.1 MPa (positive pressure and full vacuum range) Pressure test pressure: 0.12 MPa Design temperature: 148 °C Main body material: S31603 stainless steel (food-grade corrosion resistance) Manufacturing year (tank body): 2025 Tank year: 2011 from Tetra Pak Engineering standard: GB/T 150-2024 (pressure vessels) System heritage: Tetra Pak aseptic module lineage for beverage applications Advanced Automation & Control Systems The tank is prepared for seamless integration into automated process control architectures typical of modern beverage production lines. Instrumentation ports and valve interfaces support level, pressure, and temperature monitoring, as well as aseptic steam-in-place (SIP) and clean-in-place (CIP) routines. The system documentation set includes activation and sequence diagrams and a communication description for S7-based control, supporting PLC/HMI connectivity, interlocks, and recipe-driven operation. PLC-ready signals for level, pressure/vacuum, and temperature Interfaces for aseptic valve clusters and CIP/SIP circuits Safety interlocks for pressure and vacuum protection Pgodox E Tbfjpfx Alwjt Documentation for commissioning and parameterization Production Line Integration Capabilities Designed to function as an aseptic buffer or storage tank between thermal processing (e.g., UHT) and downstream filling. It can operate standalone or inline within a complete packaging line and is suitable for beverage production environments handling PET, glass, or carton filling operations. Format changes are minimal since storage capacity and process parameters are recipe-controlled. Inline integration with UHT, aseptic valve manifolds, and fillers Standalone operation for batch buffering and sterile hold Compatible with CIP/SIP plant utilities and sanitary piping Ideal for modernization of a second hand or used bottling line Machine Condition & Maintenance History The pressure vessel (tank body) is newly manufactured in 2025, paired with system documentation and aseptic process lineage originating from a 2011 Tetra Pak aseptic system. The unit is offered as second hand equipment and is ready for operation upon proper installation and commissioning. Availability of technical manuals supports maintenance planning, preventive routines, and efficient start-up. Body is new (2025) with documented pressure test and design ratings Provided with technical manuals, preventive maintenance references, and flow/layout documents Prepared for swift recommissioning in industrial packaging facilities Operational Performance & Versatility Engineered for hygienic and aseptic conditions, the tank provides stable pressure/vacuum capability for sterile storage.

Condition: used, Year of construction: 2008, operating hours: 34,590 h, machine/vehicle number: R81, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart. Operational Performance & Versatility Pjdpfex H Thusx Alwogt Product scope: UHT milk, juice, and shelf-stable beverages

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Pgodey Ef Ttjpfx Alwjt

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run Pjdpfxsv Dxxne Alwjgt - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, Year of construction: 1981, functionality: unexamined, Stihl/Holtec mobile lumber stacking saw. Psdpsz Ea Umjfx Alwegt

Condition: good (used), Year of construction: 2010, functionality: fully functional, Well-maintained and lightly used Gabbiani/SCM Galaxy 105 horizontal panel dividing saw. Year of manufacture: 2010 Cutting width: 4,500 mm Fence depth: 4,100 mm Cutting height: 105 mm Saw blade: 380 mm Pgedpsz Evm Ssfx Alwst The machine can be inspected while powered on.

Condition: used, mileage: 1,48,500 km, power: 110 kW (149.56 HP), first registration: 05/2023, fuel type: diesel, next inspection (TÜV): 05/2028, color: silver, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Business package Amundsen, Driving Assistance Package: Traveller, Digital instrument cluster (virtual cockpit), Rear and rear side windows tinted (SunSet), Phonebox, Audio navigation system Amundsen, 230V socket, USB connection (2) in the rear center console, Parking assist front and rear, Comfort Package Plus, Ambient lighting LED, Interior trim: Decorative inserts Argenzo Zebrano, Rear side window roller blinds, 3-zone Climatronic air conditioning, Front seat heating, Folding remote control key (3), Heated steering wheel, Alloy wheels 7x17 (Stratos), Metallic paint, Seat cover/upholstery: Fabric Style Beige Additional equipment: Psdpfx Alsz Ec I Njwjgt Storage compartment for umbrella, Airbag on passenger side can be deactivated, Airbag driver/passenger side, Acoustic glass for front door windows, Anti-slip regulation (ASR), Equipment package: Green tec, Exterior mirrors electrically adjustable, heated and foldable, with automatic anti-dazzle function, Exterior mirror with automatic anti-dazzle function, left, Exterior mirror with puddle light, Exterior mirrors in vehicle color, Regenerative braking system, Glasses compartment, Chrome trim on side windows, Roof rails anodized, Through-loading feature (rear center armrest), Electronic limited slip differential (XDS), Driving Assistance System: Multi-collision brake (Multi Collision Brake), Power windows front + rear, Hands-free phone system with Bluetooth, Footwell lighting front and rear, Illuminated glove compartment, Rear lights LED (crystal glass optics), Rear window wiper, Infotainment package Bolero, Audio system Bolero (MP3-capable, SD card interface), USB connection, Wireless SmartLink, Interior trim: Decorative inserts Anthracite - Brushed, Interior trim: Decorative inserts Gray (metallic look), Interior mirror with automatic anti-dazzle function, Isofix mounts for child seat on rear seat, Body: 5-door, Child lock electrically operated, Knee airbag on driver side, Multifunction storage compartment under luggage compartment cover, Digital instrument cluster (virtual cockpit), Head airbag system, Rear headrests, Front headrests, Release of rear seat backrest in the trunk, Lumbar support seat front left, Lumbar support seat front right, Steering column (steering wheel) height adjustable, Steering column (steering wheel) length adjustable, Light assistant (Coming Home, Leaving Home), Line-In audio connection in center console, Model refinement, Engine 2.0 Ltr. - 110 kW TDI, Engine drag torque control (MSR), Emergency call system, Digital radio reception (DAB+), Tire repair kit, Rear seat back divided/foldable, Low emission according to emission standard Euro 6d, Gear/selector lever knob in leather, Windshield washer nozzles heated, Windshield wipers Aero (flat blade windshield wipers), Rear lights LED with dynamic turn signal, Side airbag front, Rear and rear side windows tinted (SunSet), Front seat left height adjustable, Front seat right height adjustable, Front seats electrically adjustable (left with memory), Front seat heating, Front seat backrest right foldable, Seat longitudinal adjustment passenger seat, electrically adjustable from the rear, SmartLink (MirrorLink, Apple CarPlay and Android Auto), Sun visor left with mirror, Sun visor right with mirror, Voice control for infotainment system, Start/stop system, Socket (12V connection) in luggage compartment/loading area, Socket (12V connection) in front center console, Lashing eyes in luggage compartment/loading area.

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or Pgedpfxsz D U Hno Alwet bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Condition: new, Year of construction: 2026, Sharpening woodworking tools The PROFI chisel (lancing bag) and planing knife grinding machine! No cheap ASIA copy! The original! WOOD-TOOL-GRINDER WTG-1 - «Swiss Currently the absolute cheapest PROFI wood tool grinder on the market! For a precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder sharpen your tools like: «Chisels, plow blades, chisels, chisels» fast, simple, accurate and inexpensive ... Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Where conventionally wood is processed. - For example, in carpentry, carpentry, - carpentry, schools, trade schools, - Training centers / training workshops ... Your advantages - Very precise, stable and stable construction - Fast, in just 30 seconds you grind a perfect flashless edge - Extremely easy to use, also for apprentices and unskilled workers - Dry grinding principle, i. no problems with moisture (water / oil) - Stepless cutting angle adjustment - You buy fewer new tools, thus lower maintenance and fixed costs Construction of the wooden tool grinding machine «WTG-1» The WTG is powered by a powerful 500 watt motor. The carriage used is a dust-proof, high-precision, ball-bearing profiled rail guide, which is used a thousand times in machine tools, industrial robots and precision special purpose machines. Stepless grinding is achieved by means of an accurate and self-locking dovetail. The tool clamping is safe and stable via a parallel clamping system. Technical specifications Weight: 20 kg Connection: 230 volts Motor: 500 watts Speed: 3000 rpm Grindable tool width: 5 - 60 mm Cutting angle adjustment: 25 - 30 ° degrees stepless Main grinding wheel: special corundum Ø 100 mm Polishing wheel / buffing wheel: special type ROTAX Ø 150 mm I would recommend you the basic machine and the grinding double set. So you are well prepared. Your direct contact person: Sir Psdpfxedt Ap Aj Alwjgt Marc Brönnimann Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: excellent (used), functionality: fully functional, mileage: 65,078 km, power: 70 kW (95.17 HP), first registration: 12/2022, fuel type: diesel, tire size: 195/65R15 95H M+S, tire condition: 95 %, axle configuration: 4x2, wheelbase: 2,716 mm, next inspection (TÜV): 09/2028, fuel: diesel, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, EBS, air conditioning, airbag, cruise control, electronic stability program (ESP), full service history, navigation system, power assisted steering, traction control, truck registration, Very clean and well-maintained lease return vehicle with high-quality special equipment, first owner, Renault Kangoo Rapid Blue dCi 95 Extra with Sortimo workshop/service equipment, Euro 6 with truck registration, 180° rear wing doors, divided partition, right side designed as a hinged protective grille door, PDC, like-new M+S winter tires. Dashboard storage compartment above the driver 4.2-inch instrument panel with color display ABS with EBD Electrically adjustable and heated exterior mirrors Ceiling lights (2) Diesel particulate filter Tachometer ESP with hill start assist Easy-Life storage drawer Electrically operated front windows Transmission: 6-speed manual transmission Asymmetrical rear doors, sheet metal ISOFIX child seat mounting system Adjustable front headrests LED daytime running lights Steering wheel adjustable in height and depth Light and rain sensor Center console with storage compartment Upholstery: "KILYA" fabric upholstery Exterior color: Highland Gray Metallic Pgedpfxoz D Dd Nj Alwst Tire repair kit Wheels: 15-inch steel rims "Carten" Tires: 195/65R15 95 H M+S, tread depth axle 1: 90%, axle 2: 100% Key: 3-button key with automatic door locking Power steering Seats: Passenger seat adjustable and foldable in multiple ways, for through-loading from the cargo area Partition divided, with grille door on the right, can be opened for through-loading Seats: Driver's seat adjustable in height Telephone: e-Call emergency call system Cruise control and speed limiter Doors: Sliding door on the right Immobilizer, electronic Central locking with remote control Rear parking assist and rearview camera Wooden floor Wood paneling up to roof height Automatically dimming interior mirror Climate control: 2-zone automatic climate control LED lighting in the cargo area Package: Sound & Climate Package 2 with navigation Package: Cargo area protection package Package: Vario package EASY LINK 8-inch, smartphone integration, navigation Rearview camera Cargo area conversion, Sortimo workshop equipment on the left side Seats: 2 Euro 6 Complete service history with all entries in the service booklet. Major inspection with replacement of all filters, engine oil and brake fluid, as well as new vehicle inspection (TÜV/AU)! If you have any questions, please do not hesitate to contact us by phone. The vehicle description is for informational purposes only and does not constitute any guarantee in the legal sense. Information on accessories is without guarantee, subject to changes, prior sale and errors! We are a member of the Federal Association of Independent Car Dealers (BVfK) and have the BVfK quality seal!