Used Spraying Booths for sale (2,038)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,169 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,920 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details. - Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)- Axis Travel X/Y/Z: 1050 / 510 / 510 mm- Table Dimensions: 1300 x 550 mm- Maximum Table Load: 1200 kg- Spindle Speed: Up to 12000 rpm- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)- Tool Taper: SK 40 / BT 40- Tool Magazine Capacity: 30 stations- Tool Changer Type: Double gripper changer- Rapid Traverse Rate: Up to 42 m/min- Total Power-On Time: 46722 hours (as of 07.07.2026)- Automatic Operation Time: 17776 hours- Cutting Time: 15817 hours- Pure Cutting Time: 13169 hours- Weight: Approx. 6920 kg- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA- Control Circuit: AC100V, DC24V- Main Motor: Max. 47 A, 400 V- Included Accessories / Components:* Chip conveyor (chain conveyor) with discharge to chip container* Donaldson Torit DCE oil mist separator* Portable electronic handwheel* Coolant system with spray gun / compressed air gun* Machine vise (NC vise)* Approx. 100 SK 40 tool holders* Tilting chip container (green cart)* Worklight / interior lighting* Full enclosure- Renewed parts during 09/2025 service: Spindle cartridge, rotary joint, non-return valves, filters for air/lubricating oil, oil mist separator element Technical Specification Taper Size SK 40 Pjdjzl S S Topfx Alwerb

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,286 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Hakomatic B45 TB510 scrubber-dryer New SIAP 12V 105Ah gel batteries (2x) Year of manufacture: 2011; operating hours: 1,286 510 mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger for convenient daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and suction hose New suction motor ensures powerful water pickup from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Podpfx Alezzmc Soworb Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah Gel Batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, FOR SALE — SEMI-AUTOMATIC ANODIZING LINE BY DRABEX PRICE: PLN 630 000 Complete semi-automatic aluminium anodizing line for sale. The line is currently switched off and awaiting a buyer. It allows anodizing of aluminium profiles up to 6.20 m in length. Basic information: Podpfozkivgox Alworb Tank length: 6.80 m. Tank width: 0.5 m to 1.4 m. Footprint required: 25 m x 10 m. Capacity in 3-shift operation: 2000 m². Line type: semi-automatic anodizing line. Line stations: Nr 1 – Loading and unloading Nr 2 – Hot rinse — 10 m³, gas diaphragm heating, thermally insulated tank Nr 3 – Rinse — 10 m³ Nr 4 – Sealing — 20 m³, tank with bubbler, galvanic filter connected Nr 5 – Rinse — 10 m³ Nr 6 – Rinse — 10 m³ Nr 7 – Rinse or electro-colouring — 20 m³, tank without equipment Nr 8 – Rinse — 10 m³ Nr 9 – Rinse — 10 m³, tank with bubbler, spray Nr 10 – Rinse — 10 m³ Nr 11 – Degreasing — 20 m³, gas diaphragm heating, tank with bubbler Nr 12 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 13 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 14 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 15 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 16 – Rinse — 10 m³, tank with bubbler Nr 17 – Rinse — 10 m³, spray Nr 18 – Deoxidising — 10 m³, spray Nr 19 – Rinse — 10 m³, spray Nr 20 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 22V / 7000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Nr 21 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 25V / 8000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Interested buyers are welcome to get in touch. Referral reward: PLN 20,000. I will pay PLN 20,000 to whoever introduces the buyer who finalises the purchase, payable after full payment is received and the contract is signed.

Condition: used, 2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration Predszzyrgjpfx Alweb CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Podpowqw Tpefx Alwjrb Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.

Condition: used, mileage: 1,31,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin Prodpfx Alezz Tz Iswjb * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm Psdpex Eilqjfx Alworb End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing Pjdpfszib Nijx Alwerb glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Podpfx Aljzp Hc Uewjrb Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Year of construction: 2012, operating hours: 60,000 h, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 1x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) Pedpev T Ttxjfx Alwerb 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) 2x hydraulic lifters (200-900mm height)

Condition: used, functionality: fully functional, gearing type: hydrostat, fuel type: gasoline, operating hours: 2,284 h, Road marking machine: + Graco + Airless pump: Airlessco Durotech + Marking spray gun, right-hand side Pjdpfx Aloz Dgwlswerb + Hand spray gun with hose + Honda GVX340K gasoline engine, 337cc, 11 hp + hydrostatic drive + Honda 3011 chassis from 1992 with 2,284 operating hours Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and misprints excepted; subject to prior sale!

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, This is a CMP 61 combination steamer from the premium manufacturer Rational, in an electric version, manufactured in 2019 and equipped with a fully automatic self-cleaning system! The unit has been completely overhauled in our in-house workshop and is fully functional. The combination steamer shows signs of wear, see photos. The base frame shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the optimal choice if you are looking for a classic combination steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Prjdpfxjz Dg Svj Alwjb High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The Combi Master® from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Power connection: 400 V / kW: 11.0 / 50-60 Hz Capacity: 5x1/1 GN Weight: approx. 103 kg Serial number: E61MI19122799286 Year of manufacture: 2019 Condition: used, overhauled, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the ideal serving temperature in an optimal environment Automatic separation of grease for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-pane glass (swiveling for easier cleaning) Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and draining) Handheld spray with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions.

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer Predpfsz Aiyvex Alwjb The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heating element power [kW]: 24 Connected load [kW]: 29,6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Pedpfx Alsz Dmn Rswsrb Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: new, empty load weight: 9,759 kg, maximum load weight: 26,241 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,475 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, Year of construction: 2026, Equipment: ABS, Unladen weight: 9759 kg, permissible total weight: 36000 kg, folding door on the left, cargo area (L W H): 13,620 mm x 2,475 mm x 2,700 mm, tire size: 385/65 R22.5, DIN EN 12642 certificate (Code XL), cargo area volume: 91 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle at the front, electronic braking system EBS, portal doors, double-deck EURO pallet with beams, connection plug 1x15 and 2x7-pole, anti-spray, telematics system, ramp buffer, EX III with approval. You can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Prjdpfx Aljz Dmt Hswsb

Condition: used, empty load weight: 9,520 kg, maximum load weight: 26,480 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 03/2027, loading space length: 13,315 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 26,000 mm, total width: 40,000 mm, total height: 1,40,600 mm, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2023, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Equipment: ABS, tail-lift, ABS, axle manufacturer Schmitz SCB, type: freezer unit, operating hours: diesel 2,114 / electric 1,393, double-deck with beams, electrical connection, color: white, suspension: air-lift, lifting and lowering, cooling system: on-the-road cooling with diesel drive & stationary cooling, tail lift (underride guard), lift axle: 1st axle, air distribution channels, tarpaulin with tension strap fastening, pallet box for 36 pallets, portal door, brake: disc brake, fixed lateral impact protection, standard color: white, start/stop function, temperature recorder Euroscan, load capacity of tail lift: 2000, refrigeration unit type: Carrier Vector HE19 d/e, type of tail lift: Dhollandia (underride guard) 2,000 kg (with battery and charging plug), anti-spray, roof profiles, circulation wall, aluminum floor, ferry lashings, remote thermometer, cargo securing rail, 2x 7 + 15-pin power connections, digital fuel gauge, work lights (side), LED, compressible roller ramp buffers (DRP), 2x reversing lights, LED, partition wall prepared. Podpfxsz Dk Sae Alworb

Condition: used, empty load weight: 8,993 kg, maximum load weight: 33,007 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2020, next inspection (TÜV): 03/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 8,100 mm, color: white, Year of construction: 2020, mileage: 2,38,270 km, Equipment: ABS, Tomvekt: 8993kg, tillatt totalvekt: 42000kg, Apoteksertifisering, Lasterom (L B H): 13.403 mm x 2.490 mm x 2.700 mmdekkdimensjon: 385/65 R22.5, Lasteromsvolum: 90 m³, Foraksel: , 2. aksel: , 3. aksel: , Luftfjæring, Underkjøringshinder, Boggi, Elektronisk bremsesystem EBS, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, Schmitz cooling unit, 15.144 diesel hrs, 192 el hrs, 270 internal, 410 external height, 18t king pin, 8100mm wheel baseMOT/PKK 18.03.2026, Podpfx Aljyr Ua Ijwjrb

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, load capacity: 3 kg, arm reach: 703 mm, controller manufacturer: Motoman, controller model: NX100, type of input current: three-phase, Equipment: documentation/manual, Industrial robot Yaskawa Motoman YR-HP3 6-axis robot with NX100 controller for sale in good condition industrial robot: Yaskawa Motoman YR-HP3 + NX 100 control cabinet year of manufacture: 2005.06 Payload: 3 kg number of axes: 6 reach: 703mm robot weight: 45kg Repeatability 0.03 mm structure: articulated movement speed: J1: 210 °/s (3.67 rad/s) J2: 180 °/s (3.14 rad/s) J3: 225 °/s (3.93 rad/s) J4: 375 °/s (6.54 rad/s) J5 375 °/s (6.54 rad/s) J6 500 °/s (8.73 rad/s) controller: Motoman NX100 ERCS-HP3-AE00 year of manufacture: 2005.06 power supply: on request, automatic paint spray gun Walther Pilot WA200 can be applied to the robot with aluminum frame, glazed cabin, external control, safety light gate If you need more information. We are here to help! Please contact us using the contact form or give us a call Pjdpfx Aljv Ig Hnswerb Your ad has been automatically translated. Translation errors are possible

Condition: good (used), Year of construction: 1993, Heidelberg SM102FP, ref. 3048 Year of manufacture: 1993 Maximum sheet size: 720 x 1020 mm Psdpfx Aljz D Ew Dewjrb – CPC 1-04 – Quick-release clamps – Alcolor dampening units – Technotrans cooling system, air-cooled – Standard washing system – Perfecting – Grafix Exatronic Plus powder spray system

Condition: used, operating hours: 3,029 h, power: 38 kW (51.67 HP), first registration: 03/2016, color: white, fuel: diesel, emission class: euro5, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, NILFISK CITY RANGER 3500 utility vehicle New version, 38 km/h, 2-speed transmission for improved driving performance City Ranger 3500, 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3,000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65 liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system 2 x work lights at the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mechanical lifting mechanism relief Quick-Shift quick-change system for attachments for summer and winter service Preparation for hydraulics and electrical system for optional equipment options High-pressure valves (360 bar) – only with BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated rear view camera including 7” color screen -Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with rear view camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Prjdezd Alzspfx Alwsb Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed adjustment 0-150 rpm Dust reduction by spray nozzles per disc brush Automatic start-up protection (For sweeping and picking up) With hydraulic tilting adjustment of the right brush Sweeper container with suction blower Color: container in stainless steel look High-dumping height 1,600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick change (For sweeping and picking up) Dirt container deflector plate Jump start pole / external starting device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance Handheld vacuum hose € 1,300,- plus VAT Subject to change, printing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… Predpfxexqmrfo Alwjb PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: new, Year of construction: 2026, Bitumen Sprayer+Crack Sealer 2in1/ BM Combo (Without trailer) Melt and apply asphalt crack filler machine Combo has a wide range of applications. BCM-120 is professional equipment that has proven itself in the road construction industry, maintenance or repair of road surfaces. Trailed asphalt distributor ensures accurate and efficient spreading of bitumen emulsion. An upgraded bitumen machine BM-Combo runs on diesel engine with hydraulic pump drive and heats emulsion from diesel burner. The bitumen emulsion sprayer is equipped with a separate tank. Another one is installed to be filled with mastic. Materials are mixed manually. A crack sealer has an automatic control of mastic heating and the purging system. GENERAL 1. Diesel engine – 14-18 hp 2. Compressor receiver – 25L 3. Pumps drive – hydraulic CRACK SEALER 1. Bitumen tank – 120L 2. Bitumen pump – up to 10L/min, 5 bar 3. Hand spraying rod + hose 2m (not heated) 4. Manual mixing Predpevptd Njfx Alweb 5. Bitumen heating – diesel/gas burner 6. Heating control – automatic 7. Blowing system BITUMEN EMULSION SPRAYER 1. Emulsion tank – 1000L 2. Pump – 36L/min, 2 bar 3. Emulsion heating – diesel/gas burner 4. Hand spraying rod + hose 4m 5. Spraying bar 7 nozzles 6. Pipe line cleaning system and spray bar blowing Advantages -You get a bitumen emulsion sprayer and a crack sealer in one machine. -An economical diesel engine comes as standard. -You can heat the mixture from gas or electricity. -We offer the price from the manufacture and unsurpassed service.

Condition: used, empty load weight: 6,995 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,450 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/55 R22,5, color: white, Year of construction: 2019, mileage: 4,16,678 km, Equipment: ABS, Unladen weight: 6995 kg, permissible total weight: 36000 kg, certificate DIN EN 12642 (Code XL), cargo space (L W H): 13,450 mm x 2,460 mm x 2,650 mm, tire size: 385/55 R22.5, cargo space volume: 87 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system EBS, brake wear indicator, bolted chassis, connection plug 1x15 and 2x7 pole, anti-spray, light alloy rims, tire pressure monitoring, you can find our complete vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Pjdpfxez Ecaro Alwjrb

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 2,07,154 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Pedpfx Ajz Ecb Nslworb

Condition: used, mileage: 8,82,770 km, power: 324 kW (440.52 HP), first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, total length: 10,120 mm, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,691 mm, loading space width: 2,470 mm, loading space height: 2,794 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort* Cab with high roof 'XXL' (2440 mm wide, 2280 mm long) * Cab insulation NORDIC (cold protection) * Central locking with remote control * Two sleeper bunks with storage space (aluminum frame), mattresses on top and bottom * Comfort control panel for the upper sleeper bunk * Seat covers in comfort quality * Driver's air-suspended comfort seat with lumbar support, shoulder adjustment, and heating * Passenger seat, fixed, longitudinally and backrest adjustable * Storage box accessible from inside and outside * Carpeting on the engine tunnel * Cooler box * Stowage table, two drawers in the dashboard * Electric sunroof * Electric windows for driver and passenger * Electric sunblinds ----Safety & Assistance Systems* Electronic Braking System (MAN BrakeMatic) Prjdpfx Ajz D Rubjlwob * Emergency Brake Signal (ESS) * Safety Package Active Plus * Emergency Brake Assist 1 (EBA1) * Anti-lock Braking System (ABS) * Anti-Slip Regulation (ASR) * Electronic Stability Program (ESP) * Lane Guard System III (LGS III) * Adaptive Cruise Control (ACC) ----Technology & Drive* Engine D2676LF26, 440 hp / 324 kW, EURO 6 SCR, 2100 Nm * Transmission MAN TipMatic® 12 21 DD * Retarder 35 * Transmission software MAN TipMatic® Profi (for on-road use) * Differential lock, rear axle * Disc brakes front and rear * Front axle VOK-09, parabolic springs 8.0 t * Rear air suspension, ECAS air suspension system * Tag axle NOL-08, steered, liftable ----Electronics & Multimedia* Instrument panel, km/h 'High-Line' * MAN Tronic (on-board computer) * Radio MAN Media Truck Advanced 12V * Navigation system * Hands-free system for 1 mobile phone (Bluetooth®) * CB radio antenna and preparation for radio system * AUX-in/USB in the dashboard ----Climate & Heating* Auxiliary air conditioning system R134A * Additional air heater EBERSPÄCHER D4S * Heater for fuel filter * Fine dust and pollen filter ----Exterior & Body* Tarp and frame body with EDSCHA sliding cover * Sun visor * Spray mist reduction ----Lighting* Halogen twin headlights H7 for right-hand traffic * High and low beam headlights with cornering lights * Daytime running lights (ECE R87 compliant) * Entry lighting * Position lights * Side marker lights * Ambient lighting * Reading lights * Maneuvering light at the entrance ----* Tire dimension front axle: 385/55R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 2 x 600 l * AdBlue tank: 80 l * Technical gross vehicle weight: 26000 kg * Tare weight: 11980 kg * Permissible trailer load: 26470 kg * Overall length: 10120 mm * Wheelbase: 4800 + 1350 mm * Next technical inspection due: / ----Vehicle number: 10881----Errors and prior sale excepted----Advertising and various lettering have been digitally removed.----We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. We can offer the following services for an additional charge:----Trade-in of your old vehicleTÜV/technical inspectionAcceptance of complete export processingArrangement of financingApplication for export license platesTransport of vehiclesRegistration of vehiclesRecovery and vehicle transport----YOUR VTS TEAM