Used Tec-Point Gmbh - Motor Kubota D902 2.0 T Mini Excavator With Air Conditioning for sale (1,24,305)

Condition: new, functionality: fully functional, power: 56 kW (76.14 HP), Housing: Standard Structure: Stationary frame, including hooklift function for on-site mobility Color: RAL 5003 | RAL 7047 | RAL 7016 Drive: 100% electric Power: 56 kW Hydraulics: electronic mobile control Feed hopper: Standard Discharge conveyor - final grain: belt width 650 mm Discharge conveyor - oversize grain: belt width 800 mm Voltage: 400V ±5% / 50Hz Mains type: TN-C/(S) Operation: 6.5" panel, incl. CANBUS Remote control: 4-button Central lubrication: automatic Pjdpfxjwylvds Akfjpr Toolbox: 1x included Fire extinguisher: 1x included

Condition: new, functionality: fully functional, power: 140 kW (190.35 HP), Housing: Standard Chassis: Crawler undercarriage, max. 1.0 km/h Colour: RAL 5003 | RAL 7047 | RAL 7016 Drive: Perkins 1204J Power: 140 kW Emission standard: EU Stage V Hydraulics: electronic travel control Feed hopper: standard Pedpfjwylyiex Akfepr Discharge conveyor – finished product: belt width 800 mm Discharge conveyor – oversize: belt width 800 mm Cooling: 3-circuit, incl. CleanFix reversible fan Operation: 6.5" panel, incl. CANBUS Remote control: 4-button & joystick radio remote control Central lubrication: mechanical Toolbox: 1x included Fire extinguisher: 1x included

Condition: like new (used), operating hours: 185 h, functionality: fully functional, warranty duration: 12 months, power: 140 kW (190.35 HP), Features: - Dust suppression Ppjdpetwmnnefx Akfsr - Raised filling area - Flat bottom plate on tracked chassis Application: Classification of pre-crushed waste wood (see German waste wood classes: A1-A4), mainly as a mixed fraction, with foreign matter - ideal for thermal recycling, with full flexibility in use. Density: 200 - 300 kg/m³, moisture: < 30 %, length: max. 500 mm

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, scan area length: 150 mm, scan area width: 150 mm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis Pedpfxewkpx Rj Akfepr - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming Ppsdpfxovuw R Rs Akfsr - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: LAS 23 mit integrierter Absaugung, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional 30 W) Ppjdevyc Rmopfx Akfor - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - fiber optic cable approx. 2,50 m - Extraction optional

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status Ppjdpjqfcvisfx Akfor - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Podsgd D U Espfx Akfopr Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Psdpownm Ukofx Akfjpr Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. Podpfx Akoytp U Aefopr In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: AU170124-01, APPLICATION AREA UP TO NOW: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Traveling gantry with synchronized drive Vacuum lifter beam with automatically switchable suction rows, adjustable based on the respective workpiece length Schmalz vacuum generator with area suction grippers Pjdpfxjytphie Akfspr Clamp cartridges next to the suction cups ensure vacuum activation Z-lift of the suction spider via scissor guides Z-axis asynchronous motor, MoviDrive frequency converter, belt drive Interfaces for upstream and downstream stations Control system: Siemens S7-300 CONTROL CABINET: Power supply, power, and control section with main switch, power supply unit, motor protection switches, automatic circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of a CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet interface, all necessary digital input and output modules, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. Pjdpfxeyta R Uj Akfjpr An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Year of construction: 2025, condition: new, functionality: fully functional, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 3kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Ppodpfx Akod H S Hiofor Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 3kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: pressure platens Screw and wedge grips bending grips Special designs according to customer specifications • extensometer • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • putting into operation and training

Year of construction: 2025, condition: new, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 5kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 5kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: Ppjdpjd H S Rrsfx Akfor compression platens Screw and wedge grip bending fixtures Special designs according to customer specifications • extensometer / strain gauge: • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • Commissioning into operation and training

Year of construction: 2025, condition: new, Economical two-column microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 10kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 10kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: copression platens Screw and wedge grip bending fixtures Ppjdpjd H S R Ujfx Akfer Special designs according to customer specifications • extensometer / strain gauge: Long-distance strain gauge • Temperature and climatic chamber • W-Software PM-Soft-Smart for universal use, freely programmable • Commissioning and training

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ppjdpfx Asyuvq Tskfer Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Ppjdpfx Ajytr Swokfor Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Ppjdspy Uzyjpfx Akfor Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors of the Mahr Mahr multisensor coordinate measuring coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm weight: approx. 1.200 kg max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1=1,9 + L/200 Ppedpfxjg Ewk Rj Akfjr U2=2,4 + L/150 U3=2,9 + L/100 (L= measuring length in mm) increased accuracy on request traversing speed: 200 mm/s acceleration: 400 mm/s scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser -incl. high-precision USB camera with 2-stage zoom with telecentric beam path -incl. PTL01 TTL point laser, highly accurate, telecentrically coupled in -incl. Renishaw TP200 integrated tactile probe system, optionally extendable -incl. Quad-Light LED Power Ringlight, programmable incident light -incl. LED power transmitted light -incl. Nikon precision lens 5x (optional 3x, 10x, 20x, 50x) C-Mount Technology -incl. calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere and ring gauge Transfer -State-of-the-art PT200 CNC controller system in a solid, industry-standard control cabinet -PCI-BUS system for fast internal data transfer in real-time operation -Extendable 19" controller rack for optimum access in case of servicing -modular controller concept open for later upgrades and retrofits -service-optimized controller design fast access and service times -Integrated 64-bit broadband bus technology with Ech [...]

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (max.): 36,000 rpm, spindle speed (min.): 1,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1218 Availability: March 2026 Model: 5-axis CNC milling system RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Psdpfxoxdwnde Akfjpr Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center Ppedpex S Etmofx Akfsr - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system Currently 6 identical machines available External dimensions: Height 4889 mm Width 2785 mm Ppsdod Sphijpfx Akfor Depth 2810 mm Total machine load capacity up to 2 x 15,000 kg 63 beams with center bar for up to 400 kg load each In the clear usable dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the service opening 875 mm above the top floor, then 875 mm high Motor ratings Vertical drive 6 kW / 400 volts Horizontal drive 0.55 kW / 400 volts Color: gray/blue Surface cleaned, signs of wear possible Subject to change Errors and technical changes or deviations in details in photos, delivery, and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m Pjdou Nwx Uspfx Akfepr MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! *

Condition: used, 5tSWF Krantechnik GmbH Pjdpfx Akjdc A R Tjfepr

Condition: new, Year of construction: 2025, New machine made entirely of stainless steel included washing pump - Automatic basket drive - Touch button to turn the basket outside of the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 975 mm - Usable height of the basket to the lower edge of the nozzle holder Psdpfx Aohcpbbokfepr 450 mm - Flat jet nozzles - washing pressure 3 bar - including 20 KG LCT Power Star 50-730 - 24 months guarantee - Shipping is possible