Used Weeke (Homag Group) Bst 503 for sale (6,492)

Condition: good (used), Conversion processor, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: Homag Homatic -Type: 2Type: 2083027420 -Number: 1x control cards available -Price: per piece -Dimensions: 20/195/H265 mm Kodpfx Aocc Aqnonionc -Weight: 0.36 kg

Condition: good (used), Control card, input card, control, edge banding machine, edge banding machine Kodpfxjcc Aqpo Anijnc -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0002 -Type: 4008390002 -Number: 2x control cards available -Price: per piece -Dimensions: 135/65/H200 mm -Weight: 0.5 kg

Condition: good (used), Power supply, control board, input board, control unit, edgebander, edgebander -Manufacturer: Homag Homematic Ksdpfx Anecc Aqqeisnc -Type: 2Type: 2083027013 -Number: 1x tax card available -Dimensions: 20/195/H265 mm -Weight: 0.5 kg

Condition: good (used), Control card, output card, control, edge banding machine, edge banding machine Knjdpfxocc Aquj Aniec -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083015406/07 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.31 kg

Condition: used, Edge magazine for edge banders Knodpfx Ajda Sf Nonioc -Spaces for edges: 5 pieces -Max. Edge width: 60 mm -freestanding -Dimensions: 900/530/H1030 mm -Weight: 208 kg

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables Knsdpfx Anod Rg Dpeiec N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 Knjdsdt Rgvepfx Anioc VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Kodpfx Anoifnxxsionc Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Knedpfx Ajttg S Uonijc Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Knedpfjn E N E Eox Aniec Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: new, DRIVESHAFT BALANCING MACHINE BVI-03-88 Balancing machine for professional repair of cardan shafts up to 200 kg. The hard-bearing machine is adapted for heavy cardan shafts of trucks and special machinery. The high sensitivity of the supports allows also high-quality balancing of cardan shafts of passenger cars. The machine is designed for balancing cardan shafts in the facilities of cardan repair workshops. The machine can be quickly reconfigured for balancing a large amount of single cardan shafts of various designs, as well as for the production of small batches of shafts. . . . TWO TIMES faster then your machine. Knsdpfxsn E Skwj Anijc This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . .. ... HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 5200mm, weight up to 200kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Hard-bearing type machine - safe balancing of shafts with large initial unbalance • Machine is operated by one worker • Sliding tailstock spindle - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 200 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 5200 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2500 rpm Parameters of the supply network 380V, 3 Ph, 50Hz Power consumption, minimum, 3 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 1100 kg

Condition: new, New Technology Trapezoidal Sheet Roll Forming Machine consists of these parts; Hydraulic Roll Opening and Roll Loading Trolley, 10 T Polyethylene Protective Film Coating Unit, Metal Sheet Aligning Unit, Metal RollForm Generating Unit, 18 & 36 Stations According to Form Type, Flying Continuous Length Sizing Shear Unit, Automatic Stacking and Packaging Unit, Automatic Siemens Electric Control Unit. All of our machines have CE MARKING. Please contact us for additional information and technical documents. Knsdpfx Aof Nqghjnisc

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Knedpsgylrlofx Aniec -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg Kjdpfx Ansgy Dbhsisnc

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable Kodpfxogy T I Ej Anijnc -Height: adjustable -Dimensions: 480/250/H490 mm -Weight: 29 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Kjdpogy T I Tjfx Anienc -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Pneumatic components: Bosch -Individual components: see photos -Dimensions: 500/370 / H680 mm -Weight: 26 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Knsdpfxegy T Nmj Anisc -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Individual components: see photos -Dimensions: 590/280 / H750 mm -Weight: 27 kg

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine Kjdovxghgjpfx Anionc -Manufacturer: Homag, milling unit for edge processing machines with Perske motor -Milling units: pivoting -Engine: Perske DVMS 903/2 -Power: 0.40 kW -Frequency: 200 Hz -Speed: 12000 rpm -Dimensions: 440/380/H595 mm -Weight: 56 kg

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0/200/06/3164, overall weight: 6,500 kg, total length: 12,600 mm, workpiece weight (max.): 5,500 kg, Softforming edge banding machine , in operation, used condition, year of manufacture 2003, Kjdjvx Ep Njpfx Anionc

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Engines: 2 x Perske VS 31.09-2 / DVMS 903/2 -Power: 0.4 kW -Frequency: 200 Hz -Speed: 11300 rpm -Number: 1x milling unit available Kedpfevy Thcsx Anijnc -Dimensions: 490/380/H610 mm -Weight: 49 kg

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Ksdpfoukhd Aox Anijnc Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels Kedscr U Urjpfx Anionc SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz Kedpfx Aneb A Nmpeijnc -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg Knsdpob A Nm Njfx Aniec

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.23 kW Kjdpfx Aob A Nx Denienc -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg