Used Wmw Abw Gb2 Mk2 for sale (1,402)

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm Fgjdeu N Dz Aspfx Aptsg *

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg Fsdpeu N D Ayefx Aptjgg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Technical details: floor-plate length: 510 mm Fgodpfeu N D Dwox Aptog plate width: 270 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: width: 1005 mm Fgodpfxju N D U Nj Apteg depth: 506 mm height: 1150 mm weight of the machine ca.: 911 kg Execution of the clamping surface vertical: H: 1150mm; W: 1005mm; surface finished, 49 pcs. threaded holes M24; sideways 7 pcs. semicircular recessesØ 100 x 82 mm (each side) Execution clamping surface foot: L: 506mm; W: 1005mm; clamping with 4x clamping groovesØ 30 x 100mm. *

Condition: used, Year of construction: 1989, Technical details: table length: 1600 mm table width: 920 mm height over floor: 200 mm weight of the machine ca.: 0,69 t Clamping table with 4x through holes Ø 22 mm Material cast steel T-slot according to DIN 650: T-slot spacing 250mm T-slot outer spacing (right and left) 120 mm a=22; h=38.5; b=40; c=18 mm Fgjdpfsu N Ebqox Apteg T-slot length = 1380 mm *

Condition: used, Technical details: Fsdju N Ecnepfx Aptjgg width: 300 mm depth: 150 mm height: 340 mm weight of the machine ca.: 31 kg

Condition: used, Technical details: diameter: 600 mm passage: 250 mm width: 100 mm revolution per minute: 500 U/min Fgodpsu N Ez Defx Apteg weight of the machine approx.: 175 kg 3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left Fgsdpeu N E Absfx Aptog - clamping area 500 x 400mm *

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Fgsdpfx Aou N E Dxoptog *

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8081, Offer Number: D08L/8081 Machinetype: straightening and cutting machine Make: WMW Type: UDARA10 Constr. year: 1980 diameter range: 3-10 mm cutting length: 2000 mm Fgjdpfx Aswi Svcjptjg speed - meters/min: 22-71 Location: In our warehouse

Condition: good (used), total length: 3,620 mm, total width: 2,025 mm, plate height: 350 mm, Manufacturer: UNION Type: Cast iron Year of construction: 2000 Specifications Metric US Standard Length 3620 mm Width 2125 mm Height 350 mm Number of T-slots 7 T-slot spacing / pitch 300 mm T-slot size 34 mm Weight per plate approx. 5200 kg Number of matching pieces 5 Dimensions (Estimate) Fgsdpfxjwp Hn Te Aptsg Length 3619 mm Width 2025 mm Height 350 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contractual terms. We recommend you verify all important details.

Condition: good (used), total length: 2,035 mm, total width: 1,565 mm, plate height: 255 mm, Manufacturer: ZERBST Type: DP1 / S2 & DP2 / S3 & DP3 / S3 Year of manufacture: 1988 Specifications Metric US Standard Length 2035 mm Width 1565 mm Height 255 mm Weight per plate approx. 1200 kg Number of matching pieces 4 Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details. Fedpfjwp H Awex Aptogg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 025137, Offer 24190 Technical specifications: - Drilling capacity: 25 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 140 mm - 8 spindle speeds: 100 - 2900 rpm - Min./max. distance spindle/table: 110 / 405 mm - Work light Fjdpfxswyl H Ns Aptegg - Quick-action drill chuck - Coolant device - Machine vice - Machine base - Drive: 400 V / 0.75 kW - Required space (W x H x D): 400 x 1250 x 600 mm - Weight approx.: 200 kg

Condition: used, Year of construction: 1981, Technical details: Fgodpfx Aju Nc Hkoptog x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle Fsdpfx Apsu Ndb Astogg The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg Fgedeu Ndf Ijpfx Aptsg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, Year of construction: 1979, Technical details: Fodpfx Aeu Nfineptegg pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Year of construction: 2026, condition: new, The machine is suitable for the stoning of stone fruit. The chopped fruit can be delivered to a container, a pasteurizer, a jam extractor, suitable for use with a screw pump or collector handle with manual force. - quick sieve change - low upkeep - perfect for mash seed removing Specifications: - Performance: 1-5000 kg/h - Electric demand: 11 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1450x1650x1860 mm - Weight: 500 kg - IP65 certified electronics - Input height: 1750 mm - Output height: 300 mm - Food industrial rotor rubbers - Input and output connections: DN65 - Built-in inverter: speed control for the rotors -Adjustable distance between the sieve and rotors - Inspection window The machine has two work area. In the first, it does the destoning, in the second the pulping. With feed screw in the input hopper. With 4 pcs vibration-free feet. It requires minimal maintenance. Sieves can be changed easily and quickly. Two choosable diameter sieve is inclusive in the list price Available options: - Sieves: - 0,8 mm diameter sieve: berries, pulps - 1,5 mm diameter sieve: berries, pulps - 3 mm diameter sieve: apple, pear mash Fsdjd Aqzdepfx Aptogg - 5 mm diameter sieve: cherry - 8 mm diameter sieve: plum, apricots - 10 mm diameter sieve: peach, mango - Custom diameter sieve

Condition: excellent (used), Year of construction: 1989, Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Number: 1824/1989 Mounting: SK 50 Contact surface, W x H: 480 x 460 mm Hole spacing, W x H: 425 x 415 mm Gear diameter, internal / external: 75 / 100 mm Fgsdeh Ar Tyepfx Aptog Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Dimensions: 560 x 410 x 1,000 mm

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection Fgodpfx Apofmh Tlotog - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700,- Accessories: Coolant system (€ 620,-) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875,-) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Tailstock Taper size: MK 2 Fgsdpfodlp Txjx Apteg Quill travel: 30 mm Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Base area: 230 x 155 mm Weight: 27 kg

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity Fsdpfx Apjd Su Agstsgg - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase, 400V with frequency converter (kW) 4.0 Spindle speeds, infinitely variable R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Manual feed Weight (kg) 400 Optional drilling package 6 (€ 910.00 plus VAT) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, free of charge, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2026, Threading device Quick-release threading device Programmable drilling depth stop Drilling depth and speed display - digital Threading device M30 (dependent on pitch) Opt. R1: Spindle speeds with gearbox, continuously variable, speed range 100-2000 rpm Opt. R2: Spindle speeds with gearbox, continuously variable, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Overhang 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-changing 1.5/3.0 kW Weight 420 kg Option: Drilling kit No. 6: Tapered arbor B18/MK 4, quick-change drill chuck B18/3-16 mm, machine vise No. 2-140 and T-slot screws, EUR 910.00 Fjdpfx Apod H Rh Rjtjgg Option: Automatic spindle stop when drilling spindle is at the top, EUR 432.00 Option: Chip breaker module, EUR 432.00 Delivery: Free to your doorstep including packaging (only Germany) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: used, Guide rail and surface grinding machine WMW FRITZ HECKERT Aschersleben Fgsdpehv A A Defx Aptog Type SZ 1000 x 1250 x 3000 / 344 Manufacturer's No. 13.2236.2 Year of manufacture 1989 Nominal grinding area 3000 x 1250 mm Table clamping surface 3240 x 1000 mm Grinding length max. 3300 mm Processing width 1250 mm Processing height 1250 mm Grinding wheel diameter (surface grinding support) max. 600 mm Grinding wheel width (surface grinding support) max. 100 mm Grinding wheel diameter (swiveling support) max. 450 mm Mains connection 400 Volt, 50 Hz - Swiveling grinding support, motor power 16.5 kW, infinitely variable speed - Grinding support for surface grinding, motor power 15 kW, infinitely variable speed - New electrical control system, based on SIEMENS S7, year of manufacture 2001 - New electrical control cabinet located nearby, year of manufacture 2001 - Infinitely variable grinding wheel speed on both grinding supports - Swiveling grinding spindle for guide rail and profile grinding - Control panel swiveling and height-adjustable - Coolant system located nearby - Hydraulic system located nearby - Oil circulation lubrication system located nearby - Various grinding wheels and arbors Space requirement (complete) L x W x H 11900 x 7700 x 4600 mm Weight 45 tons Very good condition

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen Fsdshx E T Hjpfx Aptegg -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg