Used Youbond Laminating Installation for sale (9,824)

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double Column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was already built and delivered to a customer. We can manufacture this machine for you again on very short notice—customized to your individual requirements if desired. This is a hydraulic heated press with electrically heated plates and a manual sliding table for pressing, laminating, and forming processes involving heat. Base price: €42,000 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine to the specific application. The base machine provides a functional standard configuration—in practice, it is often supplemented with additional features and configured according to project requirements. ==== Technical Data + Information: ==== General Information * Design: Double column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heating plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table stroke: 500 mm (manual) ==== Table & Ram Djdpfx Aey H Dtzeptjkt * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-point slide guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump output: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Control & Operation * SIEMENS S7-1200 control with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Dual-layer paint finish according to RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, forming press applications Heated press, hydraulic press, double column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian National Safety Directive NR 12, which is based on and extends these standards. Our key strength lies in special purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Year of construction: 2018, condition: excellent (used), Sanco Dosing Installation, Year of Manufacture: 2018 Consisting of: - 2x insulated 1200-liter tanks with manhole and agitator - Accompanying platform - 2x PROMASS A flow meters with control cabinets - LKH-5 centrifugal pump - Grundfos pump - Plate heat exchanger - Associated piping The installation was previously used for dosing lecithin, but is also suitable for other products. The unit has been dismantled in working condition and is currently stored in our warehouse. Dkodpfxjwf Izaj Aptjt We are happy to assist you further upon serious interest in this installation.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Dodezw T Duopfx Aptjkt Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: new, color: grey, Year of construction: 2026, Container Description: Our offer includes a complete package with high quality and is therefore unbeatable. We source gas appliances exclusively from qualified manufacturers with high-quality products. The structure and the entire kitchen with its equipment are NEW! Container Specifications Availability: Immediate delivery Color: Anthracite Delivery included in the price, delivery to the curb. Construction made of isothermal aluminum-fiberglass laminate with excellent aesthetic appearance. Guarantees an optimal internal temperature in all seasons. Dimensions Internal length: 5,898 mm Internal width: 2,352 mm Internal headroom: 2,385 mm Two new containers are for sale: Container 1: Empty - Ideal for individual use or conversion The water system connection, fuse box, two serving hatches, and ceiling lighting are already installed (see last images in the image gallery). Price: 25,000.00 Euro net Warranty: 1 year warranty on structure and electrical system. This price applies to the standard equipment shown in the pictures. Additional costs will be incurred for modifications or additions. Container 2: Fully equipped with catering equipment - ready for immediate use, perfect for street food. Price with the equipment described below: 39,500.00 Euro net. Catering equipment; kitchen made of stainless steel Gas appliances Gas stove "Bertos" with 2 burners, dimensions (W x D x H) 300 x 600 x 290, power: 6.2 kW, made of stainless steel, G6F2B Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas fryer "Bertos", 2 x 8 liter tank capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 3 x 11 liter propane gas cylinders Djdpoztar Dsfx Aptekt Cooling options Undercounter refrigerator "Liebherr" Combination refrigerator Liebherr Water system Water system with water canisters, 30-liter filling capacity with fresh and wastewater canisters Two stainless steel sinks with faucet Hygiene package consisting of a folding towel dispenser and a soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color changing effect around the serving hatch with remote control Emergency light Additional equipment Serving area and work surface made of brushed stainless steel Two serving hatches Insulating wall at the cooking area (fireproof) Exhaust hood made of labyrinth filters Non-slip floor for catering Splash guard optional Entrance through a side door Generator cabinet Warranty: 1 year warranty on structure and kitchen. This price applies to the standard equipment shown in the pictures. Additional costs will be incurred for modifications or additions. We can, of course, also build this model differently. Delivery time up to 6 months. Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? You can determine many vehicle details yourself!

Condition: used, Second-hand machine In all operating modes, the materials are fed from the front through the roller gap and joined together by pressure Standard number of axes: Material unwinding 2 Silicone paper unwinding 1 Roller gap adjustment 0–52 mm Pressure 0.3–0.8 N/mm Processing speed maximum 5 m/min Slow operation 0.6 m/min Reverse operation 0.6 m/min Noise level > 70 dB(A) Material data: Max. width 1400 mm Max. material diameter: Unwinding diameter 200 mm Djdpfxoznk A Ne Aptekt Silicone paper take-up diameter 150 mm Max. panel thickness 50 mm Inner diameter of roll core: 76.2 mm Power supply 230 V Availability: short notice Storage location: Röllbach

Condition: used, Year of construction: 2001, Format: 300 mm Dkjdpfx Apsy R U Ttjtjt

Condition: used, Year of construction: 2014, operating hours: 182 h, functionality: fully functional, machine/vehicle number: 1404392, type of input current: three-phase, input voltage: 380 V, We are offering this used Autobond FL 106 X 145 laminating machine, manufactured in 2014. The control system was renewed in 2020. Since then, it has processed 232,314 sheets and run for 182 hours. Unfortunately, the values before the replacement were not recorded. Machine type: FL 106 X 145 Serial number: 1404392 Rated voltage: 380/415 + N V Dksdpfjzkkmmex Aptjt Patent number: Year of manufacture: 2014 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16074, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Automatic Sheet Seperator TM -4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Dkodpfx Apozimygstjt Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer

Condition: excellent (used), Year of construction: 1998, operating hours: 6,10,00,000 h, functionality: fully functional, machine/vehicle number: 201810, color channels: 2, paper weight (min.): 50 g/m², paper weight (max.): 280 g/m², paper width (min.): 520 mm, total length: 290 mm, total width: 190 mm, total height: 170 mm, space requirement width: 300 mm, space requirement height: 220 mm, counter reading (black): 6,10,00,000, counter reading (color): 6,10,00,000, year of last overhaul: 2025, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Heidelberg Speedmaster SM 52-2-P offset printing press for sale, manufactured in 1998, currently in daily production and available for inspection and live demonstration. Configuration * 2 printing units + perfecting device (1/1 or 2/0) * Maximum sheet size: 370 × 520 mm * Total impressions: 60,956,393 * AutoPlate semi-automatic plate changing system * Heidelberg Alcolor dampening system * Technotrans refrigeration unit for the dampening solution * Continuous feeder * Electronic side lays * CP Tronic control console * Automatic ink key presetting from the CP Tronic console * FullWash automatic washing system for the plate cylinders and ink rollers (blanket washing unit not installed) * Replaced cylinders Technical Condition * The press is currently in daily production and can be inspected while running. * Original Heidelberg ink and dampening rollers were replaced approximately 2 years ago (invoice available). * The machine runs perfectly and produces commercial print jobs every day. * Sold complete with a Plate Punch & Bender. Automatic Washing Systems The press is equipped with automatic washing systems for: * Impression and transfer cylinders; * Ink rollers. The blanket washing units are not installed. Documentation * Original purchase invoice available. * Original Heidelberg manuals and tools. * Original electrical diagrams. Terms of Sale * VAT invoice will be issued. * Dismantling, loading and transportation are the buyer’s responsibility. Ideal for Printing Djdszrr U Uspfx Aptekt * Flyers * Brochures * Business cards * Folders * Forms * Labels * Commercial print jobs * High-quality promotional materials This press is an excellent choice for print shops looking for a reliable Heidelberg offset press with low operating and maintenance costs. Price €17,500 (VAT included).

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 230 V, working width: 650 mm, temperature: 140 °C, VIVID Matrix DUO MD-650 Working width 650 mm Double-sided laminator Dsdpjzia Azjfx Aptokt Adjustable speed Adjustable temperature

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working width: 760 mm, Mamy przyjemność zaoferować Państwu profesjonalny laminator termiczny ECOSYSTEM COMPACT 76, idealny do zastosowań przemysłowych w zakresie uszlachetniania druku. Urządzenie zostało zaprojektowane z myślą o wysokiej wydajności, niezawodności i precyzji laminacji różnorodnych materiałów. DANE TECHNICZNE • Maks. format arkusza (szer. x dł.): 760 x 1060 mm • Minimalny format arkusza: 210 x 250 mm • Maks. prędkość mechaniczna: 60 m/min* • Wydajność podajnika: do 10 000 arkuszy/godz.* • Gramatura papieru: 115 – 600 g/m² • Maks. szerokość folii: 750 mm Dkjdpoypd Szsfx Aptst • Średnica rolki z folią (maks.): 350 mm • Średnica wewnętrzna rolki z folią: 3” • Wysokość robocza (z paletą): 900 mm • Maks. waga stosu (z paletą): 750 kg *Wydajność zależna od materiałów i doświadczenia operatora. ZASILANIE I INSTALACJE TECHNICZNE • Zasilanie: 400 V, 3-fazowe + PE, 50 Hz • Moc zainstalowana: 31 kW • Sprężone powietrze: 700–900 nl/min przy 8 bar (Sprężarka nie wchodzi w zakres dostawy.) ZESTAW ZAWIERA • Automatyczny podajnik z elektronicznie sterowanym stołem ssącym (system PIAB) • Odwijak folii z przycinaniem bezpośrednim • Zespół laminujący z chromowanym kalandrem i gumowym wałkiem dociskowym • Zewnętrzny podgrzewacz wody z armaturą i zaworami • Grupa separacyjna z systemem nacinania folii • Gorący nóż z laserem korekcyjnym Scatec – do cięcia folii metalizowanych PET, nylonowych, tłoczonych i specjalnych. Opis funkcji: System gorącego noża umożliwia precyzyjne i czyste oddzielenie folii od krawędzi arkusza po laminacji, niezależnie od rodzaju materiału. Zintegrowany laser korekcyjny Scatec odpowiada za bieżącą kontrolę położenia arkusza oraz automatyczne dostosowanie pozycji cięcia, co zapewnia idealne wyrównanie folii względem krawędzi druku. To rozwiązanie minimalizuje błędy i zwiększa powtarzalność procesu, nawet przy dużych prędkościach produkcyjnych. • Automatyczna sztaplarka • Panel dotykowy sterowania • System zdalnej pomocy (Ethernet – po stronie klienta) • Instrukcja obsługi zgodna z normami CE • Zapasowa rolka dociskowa z łożyskami i specjalnym wózkiem

Condition: used, functionality: fully functional, With this offer, you are purchasing a used automatic laminator ‘Lami Revo-T14’. Item for sale: 1 x Lami Revo-T14 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Dkjdpfx Apjxb A N Ujtot A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” Djdpfx Ascr U Ursptekt SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and Dsdpfx Ajzx Dwnsptokt photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately. Dodpfx Ajyzcikoptekt

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. Dksdpfx Apsy Ufk Rstjt OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: used, mileage: 59,304 km, power: 103 kW (140.04 HP), first registration: 03/2020, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, INTERNAL VEHICLE NUMBER: M595----VOLKSWAGEN CRAFTER 2.0 TDI 4 MOTION FLATBED + TARPAULIN----KM: 59,304 - WELL-MAINTAINED SERVICE HISTORY LAST INSPECTION ON 06.02.2026 AT 58,011 KM ALL INSPECTIONS WERE CARRIED OUT IN AN AUTHORIZED DEALER WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORM 1ST OWNER----LIKE-NEW M+S TIRES----* HILL START ASSIST * BRAKE ASSIST (HBA) * REARVIEW CAMERA * AIR CONDITIONING * START/STOP AUTOMATIC SYSTEM ----4 MOTION----PARKING HEATER----3 SEATS----LED HEADLIGHTS----FOG LIGHTS----CORNERING LIGHTS----ROOF MARKER LIGHTS----LED WORK LIGHTS----REAR WARNING LIGHT----REFLECTORS----TOW HITCH TOWING CAPACITY UP TO MAX. 3,000 KG----FLATBED DIMENSIONS LENGTH: APPROX. 3.50 METERS WIDTH: APPROX. 2.05 METERS HEIGHT: APPROX. 2.00 METERS----* BLUETOOTH HANDS-FREE SYSTEM * SD CARD * MINI-SD CARD * USB * ON-BOARD COMPUTER * HEADLIGHT CLEANING SYSTEM * ELECTRIC WINDOWS * ELECTRICALLY ADJUSTABLE AND HEATED SIDE MIRRORS * CENTRAL LOCKING WITH REMOTE CONTROL * 2 KEYS * REAR STEP * CABIN WITH STORAGE COMPARTMENT * ILLUMINATED CABIN WITH LED * 8 TOWING EYES * WOODEN FLOOR ----Special equipment: * Storage Compartment Package 2 * Airbag driver/front passenger side * Front passenger airbag can be deactivated * Audio system Composition Audio (radio, SD card interface, MP3 playback function) * Exterior mirrors electrically adjustable and heated * Position lights * Spare wheel in driving condition incl. on-board tools and jack * Rear wall with window * Headlights LED * Seats in the cabin: double passenger seat with storage compartment * Sockets (12V connection) in the cabin (4 pieces) * Front bumper in gray * Pre-wiring for roof marker lights * Auxiliary heating (hot water) with parking heater function and remote control Additional features: * Drive type: all-wheel drive * Exterior mirror convex left * Exterior mirror convex right * LED turn signals integrated into the exterior mirrors * Floor covering in the cabin: rubber * Dual-tone horn * Driver assistance system: hill start assistant * Driver assistance system: brake assistant (HBA) * Electric windows front * Windshield laminated glass * Remote control key (2) foldable * Grab handles A-pillars * Interior lights in the cabin: LED * Body/superstructure: standard flatbed * Fuel tank: 75 liters * Radiator grille with chrome strip on top * Steering column (steering wheel) adjustable * Headlamp range adjustment * Truck registration * Marker lights side * Engine 2.0 L - 103 kW TDI * Multifunction display Plus * Rear fog light * Wheelbase 3640 mm * Tire repair kit * Low emission according to emission standard Euro 6d-TEMP Dedpfxey Ekyfo Aptskt * SCR system (AdBlue technology) * Power steering electro-mechanical * Seat cover/upholstery: fabric * Seats in the cabin: driver's seat adjustable * Steel rims 6.5x16 * Start/stop system engine * Warning system for safety belt (driver's side) * Heat-insulating glass * Central locking with remote control and interior operation * Permissible total weight 3.50 t ----If desired, we can retrofit the vehicle with a tow hitch. Professional installation - quick and reliable, starting from 599 € ++ Exclusive offer at Autohaus Mat GmbH: Up to 1,000 € trade-in bonus - your advantage for vehicle replacement! (only valid for commercial vehicles) ++ Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus...

Condition: new, mileage: 10 km, power: 90 kW (122.37 HP), fuel type: diesel, overall weight: 2,304 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Volkswagen Caddy Cargo Maxi Long Wheelbase 2970 mm 2.0 TDI 90kW/122 HP 7-speed Automatic DSG – Available Immediately. List price €40,120 incl. VAT - 2-seater with fabric upholstery - Height-adjustable driver seat - Climatic air conditioning with manual control - Fixed tow bar (towing capacity 1500 kg) - Rear parking sensors (PDC) - Cruise control / speed limiter - Asymmetrically split rear wing doors without window cutout - High partition wall without window - Composition radio with 10" color touchscreen display, traffic sign recognition, / 2 USB ports (Type C) in the front center console - Mobile online services Wired & Wireless App-Connect (Apple CarPlay, Android Auto) Dksdjyf Sc Tspfx Aptet - Digital cockpit - Lane keeping assist (Lane Assist) - Electrically adjustable and heated exterior mirrors - Multi-function leather steering wheel - Intermittent wiper system with light sensor - 16" steel wheels - Driver and passenger airbags, without knee airbag, passenger airbag can be deactivated - Front side airbags with curtain airbags - Distraction and drowsiness detection Additional features: - Driver and passenger airbags, passenger airbag can be deactivated, exterior mirrors and door handles in black, unpainted, sliding door rail cover in silver, electronic stability program (ESP), brake assist, ASR/ABS, EDS, MSR, multi-collision brake, tinted laminated windshield, 2 folding remote keys, front cup holder, matte decorative trim interior, 1 interior light in load/vehicle compartment, body style: panel van, mechanically adjustable steering column (height and reach), headlight range adjustment, N1 category (commercial vehicle registration), 2.0L – 90 kW TDI engine, non-smoker package, emergency call system, electric parking brake with auto-hold function, tire pressure monitoring, low emissions (Euro 6d standard), right sliding door, SCR system (AdBlue technology), front seat belts with pretensioner, height-adjustable, fabric upholstery "Double Grid", start/stop system, dust-resistant door seals, plastic door trim, first aid kit and warning triangle, tie-down rings in the cargo/load area, online services preparation, front seatbelt warning system, heat-insulating green-tinted glazing (side/rear) - Financing, leasing, and vehicle trade-in possible - Affordable installation of accessories and special equipment possible (all price examples incl. installation and VAT): - Plastic flooring in cargo area - Multiplex wooden flooring for cargo area - Load compartment panelling up to roof - Shelf systems for various industries - Winter wheel sets - Conversion to all-season tires (€350) - Alloy wheels in various designs Subject to errors and changes!

Condition: good (used), Roll Lam 120CS Roll Laminator Double-sided cold lamination, original base included, Lamination width: 1200 mm Manufactured by: Biedermann GmbH Roll laminator equipped with silicone-coated rollers. Technical specifications: Working width / rollers: 120 cm Djdpfx Apozuryvstjkt Working width / roll width 130 cm Dimensions (W x D x H): 170 x 68 x 125 cm Infeed table height: 92 cm Weight (with base): approx. 168 kg Maximum board thickness: up to 25 mm Roller diameter: approx. 112 mm (silicone-coated) Maximum speed: approx. 3.5 m/min Power supply: 230 V / 0.07 kW

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment Dkodpjyn Shzsfx Aptet • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. Dkedpfxszh S Ugs Aptet ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Dsdpfxsxdm E Es Aptjkt

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Dodezza Hkopfx Aptskt Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Year of construction: 2013, condition: good (used), Technical specifications: (1) Minimum format: 400 x 400 mm Dkjdpfx Apozry I Nstet Maximum format: 1260 x 1250 mm Top sheet: Cardboard from 180 – 450 g/m2 Bottom sheet: Between 0.5 and 8 mm Maximum speed: (2) Up to 6000 sheets/hour Accuracy: ± 1.5 mm Installed power: 17 kW Dimensions: 13.9 x 2.22 x 2.68 m Weight: 7,000 kg (1) The manufacturer may modify the technical specifications without prior notice. (2) The speed may vary depending on the material and its quality, formats, and other production requirements.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Specification 360/N Type Manual Laminator 360/N Application Laminating dry-film photoresist onto PCBs Max. panel width 635 mm Material thickness approx. 0.05 – 12.7 mm Laminating rollers 2, both driven Temperature control Thermoregulators for the laminating rollers Dedpfxozum Afj Aptskt Drive Adjustable transport speed Control PLC Compressed air Required for pneumatic functions Film Dry-film photoresist Design Manual laminator Manufacturer/documentation Duesse / Shipley, Rohm & Haas