Used Ytron Agitator for sale (485)

Year of construction: 2026, condition: new, The 600L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 600L - Motor: 3kW, 3-phase, 50Hz Ledpfx Aszuxw Iehtohk - Machine weight: 360kg - Machine dimensions: (L 2050 x W 780 x H 1430mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Year of construction: 2026, condition: new, The 3500L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 3500L - Motor: 15kW, 3-phase, 50Hz - Machine weight: 1300kg - Machine dimensions: (L: 3350 x W: 1410 x H: 2350mm) Ljdpfx Aozuxv Rohtjhk - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Manufacturer: Chemplex Type: T240 Electrical power: Heating: 20 kW Mixer motor: 3 kW Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Lhodpfx Aeyc Sfvjhtek Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.

Condition: used, Used Wolfking model 100 L BL stainless steel twin-shaft ribbon mixer. Lhjdezunvyjpfx Ahtjk - Manufacturer: Wolfking - Model: 100 L BL - Total volume: 110 litre (approximately) - Mixing chamber dimensions: 770 mm x 501 mm x 305 height mm (approximately) - Type of agitators: Twin uninterrupted ribbons - Dimensions of agitators: diameter 290 mm x 770 mm long (approximately) - Drive: 0.75 kW, 220/380 V, 1400 rpm (belt driven through gearbox) - Includes: Control panel

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: Lodpszunptefx Ahtjhk - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Specifications: Capacity: 1,900 L Type of stainless: AISI 304 Internal Pressure: -1 bar Internal Temperature: 100°C Jacket Pressure: 2 bar Jacket Temperature: 135°C Legs/Lugs: Legs

Condition: used, Year of construction: 2004, functionality: fully functional, total height: 5,000 mm, total width: 3,100 mm, Grape fermenter with a capacity of 15 cubic meters (15 000 liters), in very good condition. It has a water jacket and an agitator with an electric motor. There are 4 units available, the price is for one piece. If you purchase more than one unit, price can be negotiated. TECHNICAL DATA: Volume: 15 m³ (15000 liters); Type: Vertical; Material: Stainless steel, food grade; Diameter: 3100 mm; Height of the body with legs: 5000 mm; Year of production: 2004; Manufacturer: PIM-Haskovo Lodpfx Ahsy It Ukotohk With electric motor and agitator, Power: 4.1 kW, Electrical supply: 380/220V, 50Hz, IP54 protection Built-in thermostat and temperature control panel with a water jacket.

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia Lhodpfxjzvqi Se Ahtek - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: excellent (used), Year of construction: 2016, usable tank capacity: 18,000 l, total width: 2,200 mm, total height: 4,500 mm, For Sale: Sourdough preparation and storage set Lhsdjzval Aspfx Ahtok 3x IsernHäger Cooled and insulated stainless steel mixing/storage tank + 1x Diosna Isernhager preparation tank 3x PABST MF6000 stainless steel mixing tank - 6,000 l (2016) - Insulated (IsernHäger) Technical specifications: Brand: PABST Type: MF6000 Year of manufacture: 2016 Capacity: 6,000 liters Material: Stainless steel Insulation: Yes, fully insulated Manhole: Yes, equipped with an inspection hatch Total height: approx. 4,500 mm (4.5 meters) Tank height (without frame): approx. 2,800 mm Total width/diameter: approx. 2,200 mm Net weight: 1,650 kg Mixing system: Yes, equipped with a built-in agitator Agitator power: 7.5 kW Description: High-quality PABST MF6000 vertical stainless steel storage and mixing tank for sale. These high-quality industrial tanks from 2016 have a capacity of 6,000 liters each and are ideally suited for the food industry, including large-scale bakeries, for the storage and processing of liquid ingredients or dough products. Equipped with a powerful, integrated agitator (7.5 kW) mounted on the top, the tank ensures very efficient mixing and homogenization. The tank is fully insulated to maintain a constant product temperature during processing or storage. Key features: High-quality construction: Made of high-quality stainless steel for maximum hygiene and durability. Powerful agitator: Integrated 7.5 kW motor effortlessly handles fluids with varying viscosities. Full insulation: Excellent temperature control for sensitive ingredients. Easy to maintain: Equipped with an inspection hatch (manhole) on the top for easy access and cleaning. Safe design: Robust vertical construction on heavy-duty legs. 1x IsernHäger Diosna storage tank 1000 syst Brand: IsernHäger Load cells: Yes Manhole: Yes Own weight: 410 kg Stainless steel: Yes Total dimension Height: 2000 mm Year of manufacture: 2016 Type: 1000 syst Agitator power: 5.2 kW Tank diameter: 1300 mm Tank height: 1150 mm It is possible to view these tanks at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Small brewing system with 3 stainless steel brewing vessels with wort cooling and tanks for fermentation and storage. The system consists of the following components: - Mash tun (Inox Behälter GmbH, 2019) with a gross volume of 152 litres and adjustable agitator. Indirectly heated with timer and temperature control - Lauter tun (Inox Behälter GmbH, 2019) with a gross volume of 171 litres and false bottom. - Wort pan (Inox Behälter GmbH, 2023) with a gross volume of 250 litres. Indirectly heated with timer and temperature control. - Mash pump (Zuwa, 2019) with a power output of 0.37 kW. - Wort cooler (Kelvion, 2016). - 4 single-walled storage tanks (Eurolux) standing on 4 feet, 3 of which have a gross capacity of 250 litres and 1 of which has a gross capacity of 200 litres. The tanks are each equipped with a immersion sleeve for temperature measurement and can be opened via a screw-on manhole cover. Each with a drain pipe and manual valve as well as a sampling tap. Additional title: 3-unit stainless steel brewhouse with fermentation and storage tanks; built in 2 Cast wort capacity: 230 l Operation / Control: Temperatursteuerung und Timer and Sudgefäßen Material: All vessels from stainless steel 1.4301 (AISI 304) Ljdpfx Aheztyauotohk Base construction: Mobile brewing vessels on wheels Features: Mashing tun, lauter tun, wort pan, mash pump, wort cooler, 4 storage tanks

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Ljdpfeztwz Asx Ahtjhk Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Lhjdeztpxmepfx Ahtjk

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation Lsdsfmqq Eepfx Ahtohk including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net Lhods E Dquepfx Ahtek -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, Year of construction: 2025, functionality: fully functional, tank capacity: 95 l, usable tank capacity: 80 l, total length: 1,000 mm, total width: 1,000 mm, total height: 2,400 mm, outer diameter: 1,000 mm, overall weight: 120 kg, wall material: stainless steel, wall structure: double-walled, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, cooling unit, 95L Distilling Machine – Display Model – Copper Pot Still with Column, Spirits Distillery Equipment, Single-Pass Distillation Description 95L Column Distillery – Showroom Display Model (Year of Manufacture: 2025) (The unit was used for display purposes only and has never been used for distilling.) Key Information: • Distillation time: 2–2.5 hours (single run only) • Heating options: Electric and/or gas heating • Power: 9 kW or 12 kW (selectable) • Double-wall boiler with water bath and electric agitator motor • Two flow meters for precise process control • Dephlegmator thermometer • Mash thermometer Lhodpfxjzlgn As Ahtjk • Alcohol collection vessel (spirit receiver) • 3 bubble plates with liquid level control • Back-flush system • Made exclusively from copper and stainless steel • Final product: approx. 85% ABV, highly aromatic and exceptionally pure This innovative distillery is a new, ex-display model manufactured in Hungary. Registration of the distillery with the customs authorities is the responsibility of the buyer. The distilling machine can be registered as a simple distillation unit. Includes warranty! Available for immediate delivery! If you have any questions, please feel free to contact me.

Condition: used, Used Oliver & Batlle approximately 1,400 litre capacity 304 stainless steel vertical reactor. Unit has welded dished top and bottom heads. Approximately 1,300mm diameter x 1,100mm straight side. Internal rated atmospheric design pressure at 50 deg.c. Has external half pipe coil stainless steel jacket rated 5 bar design pressure at 90 deg.c. Unit includes top entry stainless steel 2-tier agitator driven by 30kw motor.gearbox. Unit is mounted on side support lugs. Lhjdpfx Aszvyliohtok

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team. Lsdpfx Aozvykxohtohk

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Specifications: Capacity: 528 gal Type of stainless: stainless steel Internal Pressure: 29 PSI Lhjdpfxozvycbe Ahtsk Internal Temperature: 273°F Jacket Pressure: 58 PSI Type Of Heads: welded dished top and welded dished bottom Legs/Lugs: Yes

Condition: new, functionality: fully functional, gearing type: other, color: green, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB BPM 500 | Asphalt Crack Sealing Machine – Professional Road Repair & Maintenance Equipment The TICAB BPM 500 Crack Sealing Machine is a heavy duty asphalt crack filler and joint sealing machine designed for professional crack sealing, seam filling, pothole edge repair, and pavement waterproofing on roads, highways, airfields, parking lots, industrial surfaces, and concrete joints. Built for high performance and durability, this road maintenance machine delivers reliable results for contractors and municipalities. Key Features • Efficient diesel engine and economical operation with rapid heating in under 2 hours • Large capacity crack sealing machine with 500 L mastic tank for extended work cycles • High pressure pump feeding heated sealing mastic under pressure (up to ~10 L/min) Ljdpfxex U S Hlj Ahtshk • Indirect diesel burner heating system with automatic temperature control for consistent material performance up to 210 °C • Heated hose system and mixer agitator for uniform temperature and smooth material flow • Compressor and purge system included for crack cleaning and hose maintenance • Self propelled wheel option for improved maneuverability (optional upon request) • Can be mounted on a trailer or frame as required ❗ Applications • Asphalt crack and seam sealing • Pothole edge repair and joint filling • Road and highway maintenance and resurfacing • Airport pavements, parking lots, driveways, bike paths, and industrial surfaces • Surface sealing before overlay or patching Why Choose TICAB BPM 500 Its ability to efficiently handle bitumen elastomeric sealing mastics makes it a top choice for contractors, municipalities, and civil engineering companies seeking durable, long lasting pavement repair solutions. The TICAB BPM 500 stands out as a robust, high performance crack sealing machine that combines large tank capacity, reliable indirect diesel heating, automatic temperature control, and versatile use across road construction and maintenance sectors. Contact us now for price, delivery options, and full technical details. Enhance your asphalt repair capacity today!

Condition: new, functionality: fully functional, gearing type: other, color: green, emission class: none, brakes: other, suspension: other, Year of construction: 2026, driver cabin: other, Equipment: low noise, TICAB BPM 500 | Asphalt Crack Sealing Machine – Professional Road Repair & Maintenance Equipment Lsdpfxsx U Sfhj Ahtjhk The TICAB BPM 500 Crack Sealing Machine is a heavy duty asphalt crack filler and joint sealing machine designed for professional crack sealing, seam filling, pothole edge repair, and pavement waterproofing on roads, highways, airfields, parking lots, industrial surfaces, and concrete joints. Built for high performance and durability, this road maintenance machine delivers reliable results for contractors and municipalities. Key Features • Efficient diesel engine and economical operation with rapid heating in under 2 hours • High pressure pump feeding heated sealing mastic under pressure (up to ~10 L/min) • Compressor and purge system included for crack cleaning and hose maintenance • Large capacity crack sealing machine with 500 L mastic tank for extended work cycles • Indirect diesel burner heating system with automatic temperature control for consistent material performance up to 210 °C • Heated hose system and mixer agitator for uniform temperature and smooth material flow • Self propelled wheel option for improved maneuverability (optional upon request) • Can be mounted on a trailer or frame as required ❗ Applications • Asphalt crack and seam sealing • Pothole edge repair and joint filling • Road and highway maintenance and resurfacing • Airport pavements, parking lots, driveways, bike paths, and industrial surfaces • Surface sealing before overlay or patching Why Choose TICAB BPM 500 Its ability to efficiently handle bitumen elastomeric sealing mastics makes it a top choice for contractors, municipalities, and civil engineering companies seeking durable, long lasting pavement repair solutions. The TICAB BPM 500 stands out as a robust, high performance crack sealing machine that combines large tank capacity, reliable indirect diesel heating, automatic temperature control, and versatile use across road construction and maintenance sectors. Contact us now for price, delivery options, and full technical details. Enhance your asphalt repair capacity today!

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Ljdpfszb Dp Rsx Ahtohk Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Ljdpfx Ahezb Dr Sstshk Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Manufacturer: Becomix. Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Lhjdpfx Aoyx Ibgjhtsk Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. - PLC control integrated into a mobile table. -Mixing vessel full vacuum to 1 bar, double jacket 4 bar.

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Ljdszn N H Tjpfx Ahtjhk

Year of construction: 2001, condition: used, Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Bowl rated -1/atmospheric pressure at 95°C max. temperarure. Stainless steel nonpressure jacket capacity 0,8 litre, 95°C max. temperature. Has bottom S-blade type of agitator driven via dual speed el. motor 1.5/1.9 kW, 1420/2810 rpm, 50 Hz, 400 V. The vessel has top entry manual teflon wall scrapper. Integrated el. switchboard with local control panel. Also includes vacuum pump DVP Vacuum Italy model LB.5WR and el. heater Thermo Haake model C10 with circulation pump for heating jacket. Lhjdpfslc Etqjx Ahtek

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. Lhedpfx Aheq Nf S Retok 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.