Used Assembly Station With Turning Device for sale (24,721)

Condition: new, Year of construction: 2024, 1000 kg load capacity, complete set including hand and dual foot control Welding rotary table, height-adjustable with through-hole, 200 mm Plate diameter 900 mm Height, horizontal, min. 0.65 m, max. 1.25 m Height, tilted, min. 0.45 m, max. 0.95 m Speed from 0.01 - 1.1 rpm Tilt up to 135° Hand and foot control with speed display Nsdpfx Aboid Etis Uswl very robust

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control Nwjdpsid Szvjfx Ab Uol 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set Nwjdpfx Aboifgu Uo Ujl 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C synchronous dual drive AC motor, 380 V, 750 W with hand and foot remote control, complete set

Condition: new, Year of construction: 2025, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Njdpfx Aboifw Hde Uswl Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter Nwodpfx Absxw Ilme Uel

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 269.7 kW (366.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,250 mm, total height: 1,590 mm, warranty duration: 12 months, Dry-cooler AERMEC WTR 8043BTD 269.7 KW Cooling capacity: 269.7 kW (40/35 - 25°C) Year of manufacture: 2023 Fluid: Glycol + Water Number of fans: 4 pcs. Fan Diameter: 800 mm Volume: 80 dm³ External surface: 630.5 m² Dimensions: 4.25 x 1.1 x 1.59 m. Weight: 743 kg. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Nwodpfx Asz Agxvsb Ujl After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, axle configuration: 3 axles, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front - Disc brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at...). MIMERA K960 concrete mixer with conveyor belt on a Fliegl DSD1 interchangeable chassis. Concrete mixer from 10/2024, Caterpillar C36 engine, total production of 1,107.7 m³, 235 operating hours, Fliegl SDS01 interchangeable chassis, chassis registration date: 10/2019, SAF axles, Haldex ABS, spring brake, disc brake, air suspension, coupling heads, tire tread: 1st axle 8mm, 2nd axle 12-13mm, 3rd axle 9-10mm. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! Nodpoz Anguefx Ab Uswl = Additional Information = GVWR: 38,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Nwjdpfewym Nfex Ab Uol MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: as good as new (ex-display), Year of construction: 2023, Welding rotary table Protec KT 5000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Nwedpfx Aoficr Ujb Usl Hydraulic height adjustment Dimensions: minimum tilted height: 800 mm maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm diameter of the clamping disc: 1500 mm length: 2900 mm, width: 1400 mm weight: 3200 kg speed: from 0.01 to approximately 0.7 RPM.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 50 kg, total height: 2,300 mm, total length: 1,500 mm, total width: 1,500 mm, type of input current: three-phase, rotary table diameter: 700 mm, table load: 50 kg, The device is designed to measure radial and axial runout of rims within specified value ranges. The measurement system consists of left and right supports, which can move forward and backward within a range of 330 mm and up and down within a range of 170 mm. This enables simultaneous measurement of the rim at 4 points. The device can operate in manual and automatic modes. Nwedpfxjw Hwxwj Ab Ujl

Condition: used, Year of construction: 2005, turning diameter 170 mm Max. Turning length 120 mm bar capacity 52 mm control FANUC MSX-501 travel -x1 axis 140 mm travel -x2 axis 140 mm travel -z1 axis 450 mm travel -z2 axis 410 mm travel -y axis +/- 40 mm travel - b axis (spindle 2) 525 mm Nwedozyvb Iepfx Ab Uel speeds station 1 60 - 6000 U/min spindle bore 1 62 mm speeds station 2 60 - 6000 U/min spindle bore 2 62 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - ZT 1500 Y equipped with 2 turrets for driven tools, Y-axis and bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZT1500Y | ZT-1500 Y | ZT 1500Y | ZT-1500-Y

Condition: good (used), mileage: 611 km, color: orange, lifting height: 6,500 mm, Year of construction: 2006, operating hours: 4,225 h, CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Boki Kiefer HY1251 with Palfinger PK 2700 A * 2006 * Diesel * 4225 working hours * 611 kilometers * 6.5 meters hook height * 5 meters horizontal range * Load moment 2.6 tons/m Nodjzmfv Uopfx Ab Uewl * 2370 kg own weight * equipped with tipper body * including crane book and other documents

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Nwsdpfx Ajx Ap I Hob Uol

Condition: excellent (used), functionality: fully functional, Technical data: Nsdexzug Sjpfx Ab Uewl Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station Nodpoyzh Ulofx Ab Uewl - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. Nodpfx Ajupzn Esb Uowl ✅ PR 50 Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Condition: used, Year of construction: 2001, Seed station Kemper 800 mm Nodjz A Skuspfx Ab Uowl Year of manufacture: 2001 Condition: refurbished Suitable for integration into production lines with a working width of up to 800 mm Standalone machine with its own control cabinet Adjustable spreading rate Adjustable spreading duration Return conveyor for unused seed Extendable mesh belt Humidification and seeding can be switched off Pressure rollers at the inlet and outlet with adjustable pressure height Turning station after humidification Includes 1x spreading container and 1x extendable mesh belt

Condition: used, Year of construction: 2009, Seeding station with discharge system, BmTEC, 2-row configuration Nsdpfx Absz A Sgco Uswl Year of manufacture: 2009 Condition: refurbished Working width: 300 mm Infeed height: 820 mm Humidification belt with integrated water bath for humidifying the underside of the dough Immersion depth adjustable Tilting belt with adjustable tilting height for reliable turning of the dough pieces Sprinkling from above with adjustable sprinkling quantity Adjustable pressure roller for fixing the sprinkled material Automatic seed return Includes 2 spreading containers All belt speeds are adjustable Fast and slow discharge possible Automatic sheet feed Max. discharge length: 800 mm External dimensions (L x W x H): 330 x 130 x 220 cm

Condition: good (used), Year of construction: 2023, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Nedpfxez A T Hko Ab Uewl

Condition: good (used), Manufacturer: Jungenthal Year of manufacture: 1960 Type: DKE 1200 Machine number: WM 141 Faceplate diameter: 1,180 mm Table diameter: 1,400 mm Maximum turning height: 1,300 mm Speed range: 4.5 to 140 rpm Feed rate: 0.063 to 5.4 mm/rev Tool holder: Equipment: extended ram support, stop mechanism, measuring device Condition: good, ready for operation Connection: 25 kW Weight: 13 t Dimensions: mm Nwsdpfx Ajz A U Uvsb Usl

Condition: used, Year of construction: 2021, turning length: 320 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 200 rpm, turning diameter: 32 mm, spindle bore: 39 mm, overall weight: 2,900 kg, rotational speed (max.): 8,000 rpm, type of input current: three-phase, bar passage: 39 mm, power: 13.2 kW (17.95 HP), We are offering this used CITIZEN L32-1M10 automatic lathe, manufactured in 2021. Model: L32-1M10 Serial number: V36540 Production number: L32A/2251 Date of manufacture: 2021-11 Total load current: 36 A Rated power: 13.2 kVA Short-circuit breaking capacity: 2.5 kA Weight: 2,900 kg ON/OFF: 6,851 hours (as of 22.04.2026) Operating hours: 19,327 hours (as of 22.04.2026) If you have any questions or need further information, please send us a message or call us. Nwsdpfxey Em Dyj Ab Uel

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Nedpfx Aoz Dgudeb Ujwl Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Nwodpfxsz Dgvns Ab Uel Fixed holders,

Condition: used, Year of construction: 2017, operating hours: 19,000 h, gearing type: automatic, color: other, Year of manufacture: Aug 2017 Axle 1: left 5 mm right 5 mm Axle 2: left 18 18 mm right 18 18 mm Njdpozu Rt Usfx Ab Uewl Axle 3: left mm right mm

Condition: used, Year of construction: 2011, operating hours: 24,159 h, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Axle 1: left 12 mm right 12 mm Axle 2: left 18-18 mm right 18-18 mm Axle 3: left mm right mm Nsdpfx Asy Uw Alob Uowl