Used Benzing Cutting Device for sale (26,753)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 used Petschauer PLT800 Manual machine for re-grinding the seat of carbide saw teeth, with a cutting-off device for carbide saw blades that require repair, with a diameter of 100 to 800 mm, where the carbide teeth are soldered on too long. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding the seat after desoldering, using a 175 mm diameter and 4 mm wide ceramic grinding wheel, with an adjustment scale from 15° negative to 35° positive, and blade thickness adjustment. Left side: Cutting off carbide teeth that are soldered on too long, using a 150 or 175 mm diameter and approximately 1 mm wide diamond cutting disc. Adjustment scale for rake angle, 15° negative to 35° positive. The cutting-off process takes place at a 0° blade angle. Additional applications: Setting the tooth back Setting the chamfer on TCT saw blades Face grinding with the help of a diamond grinding wheel Re-sharpening on the circumference of the saw blade at 0° Alternate tooth arrangement possible. Ibsdozz Rlkepfx Aiyjb Technical data: Saw diameter: Max. 800 mm Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm Depth: 72 cm Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Diamond cutting disc: 150 or 175 mm Operating voltage: 230/400 volts, 3 phases, 50 Hz or 230/440 volts, 3 phases, 60 Hz Fuse protection: 3 slow-blow fuses 10 A

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Ijdpfx Aiszyx Evjyobb Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: ready for operation (used), Year of construction: 1990, A Westema cutting table for precise cutting of soft, flexible materials is available. Table dimensions X/Y: 2250mm/1500mm, max. cutting height: 230mm, cutting speed: 16m/s, motor power: 1.1kW. Including quick clamping and grinding device. Documentation available. An on site inspection is possible. Ijdpfxeyttvqe Aiyjbb

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Iedertnccepfx Aiysbb

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Ijdpfx Aiozzktheyebb Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: used, functionality: fully functional, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, CraneMasterStoreLinear S-DOWN 1530: A loading and unloading device offering an efficient connection between the machine and the storage system. It makes the automation of storage, logistics, and loading and unloading of material and cut parts, including the associated offcuts, even more efficient. It offers all the automatic functions expected of a CraneMaster system, such as efficient loading of material from the storage to the cutting machine's pallet, and simultaneous unloading of cut parts to the storage or to a discharge station. The system is recommended for manufacturing and service companies expecting the highest performance, with production ranging from low to medium or high volume. Additional Options: Iedpfx Ajzrfy Deiyobb - Automatic sheet separation - Automatic sheet thickness measurement - Anti-collision system - Automatic grate cleaning system - Gripper adjustment system - Additional conveyor for cut parts - Independent control of suction cups - Double the number of suction cups - Precise measurement of the weight of the storage tower eTower 240 sheet storage system – This is an automatic sheet storage system that works with the loading and unloading system of the CraneMasterStore or CraneMasterStoreLinear laser cutting machine. The eTower2 material storage system consists of a storage column, which also functions as a transport column, with an elevator moving within it. The elevator's task is to move shelves between the storage columns and the loading and unloading locations. In addition, the system is equipped with a movable external loading and unloading station.

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: Iedpfx Aisxn Awxjysbb • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Ibodpfsqmm D Ssx Aiyob Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Ibodpfx Aisxn Ax Aeysb

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, the Hundegger SC3 Speed-Cut, from 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production program CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis revolving milling head, 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4, from the rear - Automatic discharge of small components to the front - Wood storage blocks with rollers after discharge - Control unit for disposal with operating buttons Ibedpfx Ajz Dga Toiyeb Upgraded in May 2023 for €8,500: SC 2100 drilling unit 2.2 kW, drilling direction vertical, on the combination support for drilling up to 24 mm 4-sided inkjet labeling system Inkjet 4 CONVEYOR SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL conveyor system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 3900 hours (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH, Reulbacherstraße 18, 36115 Hilders

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right Ibedpfx Aisy E Nxgoyjb General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1,400 rpm, type of input current: three-phase, overall weight: 1,000 kg, number of spindles: 1, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Isdpfx Aisw Nn Akjysbb Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka Maximum height of the universal headstock: 170 mm Maximum height of the tailstock: 120 mm Maximum height of the tailstock with intermediate bearing: 170 mm Largest workpiece diameter between centers: 338 mm Largest workpiece diameter with floating support: 600 mm Largest distance between centers: 950 mm Internal taper of the headstock spindle: MK 4 T-slots in the machine bed: 12 mm T-slots in other parts: 8 mm Range of movement: Working range, grinding stroke: 190 mm Transverse adjustment of the tool carrier: 100 mm Vertical adjustment of the grinding head: 325 mm Feed of the grinding spindle: 5 mm Rough adjustment range of the tool carrier: 230 mm Grinding head carrier: 800 mm Universal headstock on the tool slide: 330 mm Swivel range of the grinding head carrier: 360° Grinding head: 360°, tool carrier: 360° Universal headstock, horizontal and vertical: 360° Grinding length during spiral grinding: max. 190 mm Maximum rotation of the headstock spindle during spiral grinding: 1.5 revolutions Grinding wheel, largest diameter: 125 mm Cutting disc, largest diameter: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, a table extension with a center, and is NOTES REGARDING PICKUP: loaded onto a truck, forklift available available immediately

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Ibedpfx Aszzyl Hoiyjb Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee.

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB Iedpfxeyi Nlts Aiyobb :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers :-Safety device for wheel housing (foot switch)

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Iedex S Hmzspfx Aiyjbb Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm Ibodjz Alfujpfx Aiysb • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: DC, table length: 600 mm, table width: 600 mm, It is a portable CNC cutting system from the brand manufacturer Thermacut: Input voltage: (VAC) 230V / 120 V, 50/60 HZ, 180 W, 0.5 A Max. cutting area: 3050×1525 mm Isdev Ai T Hopfx Aiyobb Max. cutting speed: 3000 mm/min Vertical stroke: 100 mm Autogenous cutting area: up to 100 mm Plasma cutting area: up to 35 mm Plasma interface: Yes Burner height control via arc voltage Total weight: 145 KG Scope of delivery: Autogenous torch, nesting software, Operating instructions Mini cutting table: small, portable and robust with water tank for cutting with water 600×600 mm cutting area Grid is replaceable with Drain valve low weight (only 108kg) built-in lockable wheels maximum material load 400 kg can be purchased with plasma device and burner on request!

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, !!! Attention!!! We buy your functional or defective Hobart processing turbine, including accessories, and offer a repair service upon request. This is a processing turbine from the premium manufacturer Hobart, type PVM 302. It is a mobile, versatile turbo mixer for pureeing, mixing, chopping, emulsifying, stirring, etc. Ideal for use with vegetable, meat, and fish soups, sauces, vegetables (grated), mashed potatoes, yogurt, dressings, fruit and vegetable purees, liquid dough, baked goods, sorbets, and omelets. Compact dimensions and ease of use guarantee fast and cost-effective operation, even in confined spaces. The machine is equipped, as can be seen in the photo of the processing head, with the PVM 302 sieve insert with 4 mm holes. The PVM 302 has an integrated safety device that prevents automatic restart after a power failure or power cut. An electrical safety device ensures that the mixing head can only be operated when it is set to a height of more than 300 mm or less than 900 mm. The PVM 302 has been completely refurbished in our in-house workshop, and the following parts have been replaced: flexible shaft / bearing shaft / sliding ring seals / various ball bearings / 1 set of horizontal knives. The processing turbine is now in excellent technical condition. The unit can be inspected and demonstrated in our workshop. Upon request, we can also send a video of the unit. The fine sieve insert is included, as well as a grease gun for regular maintenance. See photos! Manufacturer's list price = €32,945 NET The machine is available immediately. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Ibjdpfszzw Iljx Aiyeb Inspection according to DGUV V3. Technical data: Dimensions: in operation L x W x H = 1350 x 550 x 1500 mm in rest L x W x H = 1100 x 550 x 1700 mm Turbine speed / 1st gear 725 rpm / 2nd gear 1450 rpm Serial number: 94-842572 Year of construction: 2003 Condition: Used, refurbished, fully functional Machine design: Frame and all parts in contact with food made of chrome-nickel steel 18/9. The machine is mobile and equipped with 4 large rollers, two of which can be swiveled and locked. The machine is tilt-proof due to the rear outriggers. Machine with high-performance turbine and vertical and horizontal knife set; good chopping and pureeing performance. Turbine with intake protection ring. Power transmission via flexible shaft. The machine bears the GS/CE mark. Motor: Special motor, ball-bearing mounted, with motor protection switch and robust on/off switch, suitable for continuous operation. Turbine with two speeds. I. Gear 725 rpm (slow speed). II. Gear 1450 rpm (fast speed). Motor with fan cooling, protection class IP 54. Total connection value: 1.85 kW three-phase 400V/50/3 Fuse protection: 3 x 10 amps.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Isdpfjymi Naox Aiysbb OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Completely new resonator available at the end of 2025 with 6,000 watts + New laser cutting head (investment approx. EUR 190,000 in 2025) Immediately available - inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Max. format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with new cutting head Standard equipment: BySprint Fiber 4020 Pallet changer system with 2 pallets Closed enclosure/roof Scrap conveyor with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface cutting Cutting head Piercing Jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooler) Material specification Part tolerances and cut surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneously: 140 m/min Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Iodpfjzh E Ugsx Aiyebb Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 watts Maximum sheet metal thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooler): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height This used machine can be inspected under production conditions. All information is without guarantee - sale is made excluding any guarantees or warranties. Subject to prior sale.

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Isdpfxoy T Iyrs Aiysbb Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, functionality: fully functional, COMPLETE POLAR 137 ED AUTOTRIM CUTTING LINE CONSISTING OF: POLAR 137 ED AT GUILLOTINE with Autotrim device for automatic waste trim removal, useful cutting width 137 cm, complete with side connecting stainless steel air tables, Iodpfx Aey R R Rhoiysbb press before the blade, swiveling and tiltable saddle POLAR RA 6 JOGGER with air removal roller, Year 2000 POLAR TR 130/4 AUTOMATIC DELIVERY Possibility to configure the delivery and jogger on the right or left The line is installed and available for testing at our showroom

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking, and separating laminated glass, model SN GG520A-19388, manufactured in 2011. Ibodpfjxg Nxysx Aiyob Automatic positioning based on optimization, automatic blade, 2 independent heating sections, 20mm trimming, laser device for positioning diagonal cuts. Max cutting length 3700mm, max speed 100m/min, min glass thickness 2/2mm and max 8/8mm. Includes: New felt (5mm) on the unloading table, air tubes have been replaced, and the 520 LAMe-37 has undergone servicing.

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Ijdpfx Ajy Efbksiyjbb

Condition: excellent (used), Year of construction: 2022, Equipped with a leadscrew mechanism and safety device to prevent tool breakage. Program for single or continuous cycles. Electronically controlled motor braking during single cycles. Motor with pole-reversing capability. Doubled return speed. Spindle speeds are continuously adjustable. Oil circulation lubrication. Table adjustment from the front. Thread cutting capacity, M8 to M45 in E335. Iodpfx Asy Sxq Eoiysbb Threads per hour: 600. Normal drilling capacity: 50 mm. Thread depth: 150 mm. Drilling depth: 200 mm. Overhang: 325 mm, table area: 650 × 500 mm, overall height: 2150 mm. Weight: 680 kg.