Used Branson Ultrasonic Washing System for sale (41,006)

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour Kdjdpjxw Tg Nsfx Adlst # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DZ-202409012, heating capacity: 3 kW (4.08 HP), power: 1.5 kW (2.04 HP), operating temperature: 95 °C, usable tank capacity: 99 l, Equipment: documentation/manual, The machine was purchased new from the manufacturer in 2024, has only been used briefly, and is therefore in like-new condition! The system consists of four independent chambers and enables a complete cleaning process, including washing, rinsing, and drying. TECHNICAL DETAILS Number of units: 4 Housing material: Stainless steel AISI 304 Wall thickness: 2 mm Units: Ultrasonic washing chamber and ultrasonic rinsing chamber Ultrasonic power: 1,500 W (30 transducers) Frequency: 40 kHz Heating power: 3 kW Maximum operating temperature: 95 °C Circulation and filtration system Dynamic lifter system (“up & down” technique) for enhanced cleaning performance Final rinse chamber Tank capacity: approx. 99 l Heating power: 3 kW Hot air drying chamber Heating power: 3 kW High-performance blower Temperature control MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,880 x 1,350 x 1,180 mm Machine weight: approx. 480 kg EQUIPMENT Separate fluid supply and discharge for each chamber Suitable for use with industrial cleaning chemicals Stainless steel wire baskets Kodpfxjyx Annj Adlodt Drain valves and level sensors Electronic control system Complete technical documentation and certificates The washing system is designed for precision cleaning of machined metal parts, particularly for the removal of machining oils, chips, and fine particles following turning, milling, or grinding operations.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m Kodpfx Aeyl Rr Hedlsdt - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel - Commissioning / installation support can be provided - Documentation available System is dismantled and ready for transport.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW Kodpfx Adoxgcx Tjledt • Plate phase separator for oil removal • Automatic filling device • Chip filter with lye cover plate • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Offer price: €70,000.00 Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1406, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg Kedpfx Ajzmvgwodlodt • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Video recorded 19.3.2026 • Previously in professional denim-finishing production (MASI "Pesumasin No 2") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Kdsdpfozwmz Tjx Adlet Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: refurbished (used), Year of construction: 1992, operating hours: 3,998 h, functionality: fully functional, machine/vehicle number: 100175, We are selling a used Franke drum washing system for washing bulk goods, primarily for turned and milled parts. Facilities of the facility: Tanks made entirely of stainless steel Kdsdpeqwnypjfx Adljt 600 liter washing tank with 18 KW heating 600 liter flushing tank with 18 KW heating Insulation of both tanks Weekly timer for the heating Washing drum can be switched via rotary button, 360° rotation or standstill when washing and rinsing including speed sensor Exhaust fan with 900 m3/hr. Oil separator over large disc skimmer with pan and ball valve automatic water dosing / Geka coupling at the rear 2 washing baskets 530 x 300 x 200 mm with tension lid, mesh size 6x6 mm 50 kg load per washing basket Pneumatic door opening and switching from washing to rinsing To be attached to the front frame as a basket support with 4 M12 screws Drain taps for washing and rinsing tanks as well as two large maintenance hatches Good accessibility on all sides, 2 x folding doors at the front and the remaining side walls can be removed using quick-release fasteners Rexroth pneumatics Grundfos stator pump in the washing and rinsing tank 63 A Mennekes plug with 5 meter cable Rital control cabinet with accessories inside operation manual Machine ready for immediate use Delivery and commissioning possible after consultation and cost assumption If you have any further questions, please write or call

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: Kdodpfx Adezmxlpjlet - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system Kedezmt S Dspfx Adledt • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: A1106011/1300, working width: 1,300 mm, overall weight: 7,500 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. working width: 1,300 mm Max. workpiece thickness: 120 mm MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse rating: 63 A Connected load: 17.0 kW Weight: 7,500 kg Transport weight: 7,500 kg Number of transport packages: 8 units Kdedpfjzzbcgex Adlst EQUIPMENT 4 spray guns Wagner pump system

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Power supply: 400 V / 50 Hz Maximum operating pressure: 8 bar Kdjdjzy Hrkspfx Adlet Motor speed: 3,500 rpm Weight: 1,300 kg.

Condition: used, axle configuration: 3 axles, first registration: 04/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 12 mm Rear axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 9 mm Weights Unladen weight: 6,595 kg Kedpfszra Tlox Adlodt Payload: 32,405 kg GVW: 39,000 kg Condition Damage: None

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling Kdsdpfx Adozdr Ilslst 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Year of construction: 2023, condition: ready for operation (used), An HGH ultrasonic cleaning system is available. Chamber dimensions X/Y/Z: 600mm/500mm/400mm, basket dimensions X/Y/Z: 570mm/470mm/290mm, usable volume: approx. 120l, tank volume: 160l, ultrasonic power: 1200W. Documentation available. An on-site inspection is possible. Kdedozd Eipepfx Adljt

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Kdjdpfx Adjq Ewgkslot Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag No.: MR-INH-VPR61-KK6751 Equipment No.: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motors Stainless steel pump housing Inline design Heat Exchanger: Integrated stainless steel heat exchanger Shell and tube or jacketed tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Kdedoyl Ib Espfx Adljt Instrumentation: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Ready-wired for connection Industrial standard components Piping: Stainless steel process pipelines Fully insulated Flange and clamp connections Transport: Forklift- and crane-compatible Heavy-duty stainless steel base frame Application The temperature control unit is designed for controlled temperature regulation of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical processing plants, as well as temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready to connect High-quality stainless steel construction Industrial-grade quality components, including GEMÜ valves Service-friendly design Condition New system Never used Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Premium industrial components Ideal for new projects or as a replacement/redundant unit Immediate integration possible

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, This degreasing system operates under vacuum (pressure swing process) with modified alcohol or hydrocarbon. (New system) 12-month warranty Immediately available from St. Gallen With vacuum pressure swing process System process: spray, immersion, ultrasonic, and steam degreasing including vacuum drying. Specifications: Ultrasonic 2*1000 W - 25 kHz Double fine filter Chamber door in bulletproof glass 2-tank system, capacity 400L Double distillation and residual distillation Kdsdjqy H H Dopfx Adlot Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 wash baskets, mesh size 7mm and 12mm 12" touch panel Prepared for automatic loading Maximum basket size (480 x 320 x 200 mm) Maximum load weight 100 kg System dimensions 2400 x 2400 x 3300 mm System weight (basic version) 2500 kg Color RAL 9003 (white) RAL 7021 (black)

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 2600/016GR.2 W-4667, Industrial washing machine Pero 2600 No. 2600/016GR.2 W-4667 Ksdpfx Asw Dhqledledt Year of manufacture: 1991 Temperature of the washing and rinsing belt: 65–80°C Simatic S5 control system

Year of construction: 2010, condition: good (used), Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until 02/2022 Advanced AE immunoassay technology Meet clinical needs with acridinium ester (AE) technology that provides the flexibility and sensitivity needed for new and innovative assays. Comprehensive diagnostic clarification of various disease patterns thanks to a test menu with over 70 different assays. Simplified inventory management and reduced costs by using the same ready-to-use reagents on all ADVIA Centaur analysers. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded on the fly. Easier training and operation thanks to an intuitive, icon-based user interface. Less operator intervention as daily maintenance is low and the system does not need to be cleaned monthly or booted up daily. New and updated test definitions can be read in by the customer by simply scanning the 2D barcodes included in the usage information. Consistent, predictable turnaround time (TAT) and accuracy Up to 240 tests/hour for short turnaround time even during peak periods. Rapid prioritisation of emergency samples possible at any time thanks to a dedicated access (STAT port). Disposable pipetting tips prevent carry-over and contamination of samples. Automatically perform repeat and confirmatory testing for reactive hepatitis B surface antigen samples using Siemens Healthineers SMART algorithms. Direct connectivity Adapt to different sample volumes with easy connection to Aptio and VersaCell® X3 automation solutions. Efficient operation thanks to diagnostic IT including CentraLink® data management system Atellica Process Manager and Smart Remote Services for Diagnostics Direct pipetting from the automation solution through point-in-space technology. Shorter turnaround times for emergency samples thanks to a dedicated STAT port that allows front loading of emergency samples even when connected to an automation solution. Technical specifications Product specifications System type: Random access immunoassay system Throughput: Up to 240 tests per hour Time to first test result 18 minutes, further results every 15 seconds (method dependent) Method capacity on board: 30 test methods Indication groups§§ Allergy, anaemia, diabetes, fertility, hepatitis, HIV, immunosuppressants, infectious serology, cardiology, Bone metabolism, Liver fibrosis, Adrenal function, Oncology, Thyroid diseases, Sepsis, Therapeutic drug monitoring (TDM) Continuous operation Loading and unloading of samples and consumables at any time during continuous operation. This includes sample racks, emergency samples, reagents, ancillary reagents, reaction cuvettes, sample tips, calibrators, controls, wash solutions, water and waste. Samples and sample management: Sample tubes 3 ml, 5 ml, 7 ml and 10 ml tubes, 1 ml and 2 ml secondary tubes, micro tubes Financing through our bank is also available. komplett-konzept.leasingo.de Kedshr Rw Ijpfx Adlsdt Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) Kjdpsy Rmdwsfx Adledt AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Year of construction: 2014, condition: ready for operation (used), A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment. Kodszlt Rwjpfx Adledt

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Kjdpfjxcx A Tjx Adlodt

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Kdjdpfxjzv S Tlj Adlet Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights Kedpsyc H I Sjfx Adlodt • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: good (used), Year of construction: 2005, operating hours: 32,099 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 5,800 mm, total width: 4,800 mm, table width: 400 mm, table length: 500 mm, overall weight: 12,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,648 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis horizontal machining center from the manufacturer Starrag. The machine is used, has been regularly maintained, and is in fully functional condition. Machine Details - Manufacturer: Starrag - Model: CWK 400D - Year of manufacture: 2005 - Operating hours: 32,099 - Control: Siemens Sinumerik 840D - Machine weight: 12,800 kg - Footprint (LxW): 5.8 x 4.8 m Technical Data Travel paths: - X = 625 mm - Y = 650 mm - Z = 650 mm - B axis: 360° (0.001° increments) / 100 rpm - Spindle speed: 50 – 10,000 rpm (stepless) - Motor power: 24 kW / 37 kW - Torque: 250 Nm / 350 Nm Table & Pallets - 2 pallets, each 500 x 400 mm - T-slots to DIN 55201 - Load capacity: 400 kg - Pallet changer included (changeover time 8 s / 5 s) Tool Data - Interface: DIN 69893-HSK-A63 - Chain magazine with 60 tool positions - Tool diameter: 80 mm (up to 160 mm with adjacent pockets free) - Max. tool length: 350 mm - Max. tool weight: 10 kg - Total tool weight: 200 kg Equipment & Extras - Coolant system (emulsion, internal & external supply, approx. 1100 L) - Knoll coolant unit with fleece filter (30, 40, 50 bar) - Measuring probe: Renishaw - Tool breakage monitoring in magazine - Chip conveyor - Flood wash, paper band filter, cleaning gun at setup station Kodpjx Ib T Isfx Adlsdt - Fully enclosed working area to UVV safety standards - Pallet sequence mode - Network connectivity, Ethernet interface - Technical documentation & layout plan included Maintenance - Carried out regularly - Machine is fully functional All details have been prepared to the best of our knowledge and belief. Subject to changes, errors, and prior sale.