Used Bruderer Bsta 80 B (Ce) for sale (57,133)

Condition: ready for operation (used), Indramat CLM 01.3-X-E-4-B / 248680 servo controller SN: 248776-11393 - without display, used, in good condition, fully functional, scope of delivery as shown in photos. Nwedsx Etvvepfx Airon

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% Nedpfx Ajx Suzaoirjwn * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 340 kg, total height: 780 mm, total length: 900 mm, total width: 1,950 mm, load capacity: 843 kg, shovel Producing company Manitou Type CBR 780 L1950 Year built 2023 Height (mm) 780 Nwjdpfxeycxr As Airjn Length (mm) 900 Lifting weight (kg) 843 Weight (kg) 340 Width (mm) 1,950

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 340 kg, total height: 800 mm, total length: 860 mm, total width: 1,950 mm, load capacity: 843 kg, shovel Producing company Manitou Type CBR 780 L1950 Year built 2023 Height (mm) 800 Length (mm) 860 Lifting weight (kg) 843 Weight (kg) 340 Nwodpfxsycxtao Airen Width (mm) 1,950

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Nodsy Avnpjpfx Airown Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Year of construction: 2026, condition: new, functionality: fully functional, power: 135 kW (183.55 HP), load capacity: 800 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity Nwedpfx Aieyy Rktoren • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-63-80-A-PPS-A -Stroke travel: 80 mm -Piston: Ø 63 mm -Piston rod: Ø 16 mm / M12 -Hole: Ø 12 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece Nwsdsxwk Htjpfx Airjn -Dimensions: 185/75/H100 mm -Weight: 2.1 kg/pc.

Condition: good (used), Geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: MAZ, gear motor with brake -Gearbox: Type 80D S1 i= 84 / 1 -Speed: 11 rpm -Engine: Type B REL 80S/6 K4 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: P54 -Brake: 4 Nm -Dimensions: 450/270/H200 mm Nwjdpfxsxd Ui Es Airsn -Weight: 20.7 kg

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Nedpfx Ajwtdk Teirjwn Functional guarantee upon handover We are happy to arrange a free test run!

Condition: new, Amada/promecam style Centrical 1V press brake dies for Trumpf Nwjdpfsiqf R Iox Airen

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Dexion Type: P 90 Included in the scope of delivery: 01x Shelf connector, used Nodpfxsi Dfmlo Airswn for shelf spacing: 300 mm Cross-section: U 50x25 mm Material color: sendzimir galvanized Weight: 0.33 kg | piece

Condition: ready for operation (used), Agie power output interface POI-04 -B 614.120.4, used, minimal signs of wear, 100% functional. Nwodpfx Aji D Tx Reiron

Condition: ready for operation (used), Agie process regulator device PRD-08 B 629.792.3 with Agie process regulator device PRD-09 B 629.743.6, used, minimal signs of wear, 100% functional. Nsdpfxji D Tygj Airewn

Condition: ready for operation (used), Liebherr B 814 8000 AKAGS control unit, serial number HO065, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nwjdpfx Aiji Ebyyorsn

Condition: good (used), The scope of delivery includes: 16x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Nwedpoi Euu Uofx Airsn Borehole diameter: approx. 10 mm Weight: 1.75 kg/piece.

Condition: good (used), The scope of delivery includes: 217x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Borehole diameter: approx. 10 mm Njdpfx Aisi Euvcsrswn Weight: 1.75 kg/piece.

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Mounting type: on the side of the shelf upright Surface: hot-dip galvanized Nwedpfx Aji Euzdoiron Overall length: 450 mm For shelf spacing: approx. 350 mm Profile dimensions: U 62 x 30 mm Weight: 0.84 kg | per piece

Condition: used, Clamping devices, clamping tools, clamps, clamps, clamps -Clamp: clamp type 60 - 80 -Intermediate dimension of clamping jaws: 58 - 88 mm -Span width groove: 73 - 103 mm -Number: 12x terminals available -Price per piece -Dimensions: 200/90 / H75 mm -Weight: 2.3kg / piece Nodpfx Aiegua Hpjrewn

Condition: used, Year of manufacture: 2001 In very good condition Additional images available Nodpshc T Irsfx Airewn

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Nwedpfehq Dbmsx Airen Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Nwedjvrh Rcopfx Airsn Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 800 kN Setting range 10 – 100 % Total pressing surface 3100 x 1300 mm Specific pressure at full charge 2,0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 265 bar Daylight height 400 mm Nwedpfsfhqhdox Airsn Heating platens: Electric heating platen 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: reconditioned (used), Universal tool and cutter grinding machine Manufacturer: Harich (DECKEL) Model: A (FP 1) Overhauled and CE certified Geometric inspection with test report Comes with warranty Nededvdc Ijpfx Airewn Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety features: - New machine electrical system with control cabinet - Electronically monitored safety guard on the vertical milling head - Chuck guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start, and stop buttons - New documentation for the machine and control cabinet - CE declaration of conformity

Condition: used, Centrifugal pump, water pump -Pump housing: Nirosta -Pump wheel: stainless steel -Max. Delivery rate: 80 m³/h -Max. H: 4 mWs -Motor power: 2.5 kW -Speed: 1415 rpm -Pipe connection inlet: DN125 Nwodpjdwc I Dsfx Airjn -Pipe connection outlet: DN80 -Number: 1x pumps available -Price: per piece -Dimensions: -Weight: 125 kg

Year of construction: 1995, condition: excellent (used), 2 Sulzer MB 80-230/3 centrifugal pumps Flow rate: 79-89 m³/h Head: 240-230 m Max. temperature: 130°C Seal: Mechanical seal with seal water connection Drive power: Siemens 90 kW Speed: 2980 rpm Nwodpjd Sybuefx Airjn ! Price per unit !